Parallel Manipulators

In recent years, parallel kinematics mechanisms have attracted a lot of attention from the academic and industrial communities due to potential applications not only as robot manipulators but also as machine tools. Generally, the criteria used to compare the performance of traditional serial robots and parallel robots are the workspace, the ratio between the payload and the robot mass, accuracy, and dynamic behaviour. In addition to the reduced coupling effect between joints, parallel robots bring the benefits of much higher payload-robot mass ratios, superior accuracy and greater stiffness; qualities which lead to better dynamic performance. The main drawback with parallel robots is the relatively small workspace. A great deal of research on parallel robots has been carried out worldwide, and a large number of parallel mechanism systems have been built for various applications, such as remote handling, machine tools, medical robots, simulators, micro-robots, and humanoid robots. This book opens a window to exceptional research and development work on parallel mechanisms contributed by authors from around the world. Through this window the reader can get a good view of current parallel robot research and applications

Task-oriented optimal dimensional synthesis of robotic manipulators with limited mobility

© 2020 In this article, an optimization method is proposed for the dimensional synthesis of robotic manipulators with limited mobility, i.e. with less than 6 degrees-of-freedom (“DoF”), with a prescribed set of tasks in a constrained environment. Since these manipulators cannot achieve full 6-DoF mobility, they are able to follow only certain paths with prescribed position and orientation in space. While the most common approach to this problem employs pure path-planning algorithms, operations in narrow and complex environments might require changes to the robot design too. For this reason, this paper presents an improved approach which aims to minimize position and orientation error with a dimensional synthesis. First, a novel methodology that combines a path planning algorithm and dimensional synthesis has been proposed in order to optimize both robot geometry and pose for a given set of points. Then, the method is validated with a 4-DoF robot for high-precision laser operations in aeroengines as a case study. The example shows that the proposed procedure provides a stable algorithm with a high convergence rate and a short time to solution for robots with limited mobility in highly constrained scenarios

Evaluation of automated decisionmaking methodologies and development of an integrated robotic system simulation

A generic computer simulation for manipulator systems (ROBSIM) was implemented and the specific technologies necessary to increase the role of automation in various missions were developed. The specific items developed are: (1) capability for definition of a manipulator system consisting of multiple arms, load objects, and an environment; (2) capability for kinematic analysis, requirements analysis, and response simulation of manipulator motion; (3) postprocessing options such as graphic replay of simulated motion and manipulator parameter plotting; (4) investigation and simulation of various control methods including manual force/torque and active compliances control; (5) evaluation and implementation of three obstacle avoidance methods; (6) video simulation and edge detection; and (7) software simulation validation

Passive Compliance Control of Redundant Serial Manipulators

Current industrial robotic manipulators, and even state of the art robotic manipulators, are slower and less reliable than humans at executing constrained manipulation tasks, tasks where motion is constrained in some direction (e.g., opening a door, turning a crank, polishing a surface, or assembling parts). Many constrained manipulation tasks are still performed by people because robots do not have the manipulation ability to reliably interact with a stiff environment, for which even small commanded position error yields very high contact forces in the constrained directions. Contact forces can be regulated using compliance control, in which the multi-directional elastic behavior (force-displacement relationship) of the end-effector is controlled along with its position. Some state of the art manipulators can directly control the end-effector\u27s elastic behavior using kinematic redundancy (when the robot has more than the necessary number of joints to realize a desired end-effector position) and using variable stiffness actuators (actuators that adjust the physical joint stiffness in real time). Although redundant manipulators with variable stiffness actuators are capable of tracking a time-varying elastic behavior and position of the end-effector, no prior work addresses how to control the robot actuators to do so. This work frames this passive compliance control problem as a redundant inverse kinematics path planning problem extended to include compliance. The problem is to find a joint manipulation path (a continuous sequence of joint positions and joint compliances) to realize a task manipulation path (a continuous sequence of end-effector positions and compliances). This work resolves the joint manipulation path at two levels of quality: 1) instantaneously optimal and 2) globally optimal. An instantaneously optimal path is generated by integrating the optimal joint velocity (according to an instantaneous cost function) that yields the desired task velocity. A globally optimal path is obtained by deforming an instantaneously generated path into one that minimizes a global cost function (integral of the instantaneous cost function). This work shows the existence of multiple local minima of the global cost function and provides an algorithm for finding the global minimum

Aerospace medicine and biology: A continuing bibliography with indexes (supplement 344)

This bibliography lists 125 reports, articles and other documents introduced into the NASA Scientific and Technical Information System during January, 1989. Subject coverage includes: aerospace medicine and psychology, life support systems and controlled environments, safety equipment, exobiology and extraterrestrial life, and flight crew behavior and performance

Industrial Robotics

This book covers a wide range of topics relating to advanced industrial robotics, sensors and automation technologies. Although being highly technical and complex in nature, the papers presented in this book represent some of the latest cutting edge technologies and advancements in industrial robotics technology. This book covers topics such as networking, properties of manipulators, forward and inverse robot arm kinematics, motion path-planning, machine vision and many other practical topics too numerous to list here. The authors and editor of this book wish to inspire people, especially young ones, to get involved with robotic and mechatronic engineering technology and to develop new and exciting practical applications, perhaps using the ideas and concepts presented herein

On the design of multi-platform parallel mechanisms

Parallel mechanisms have been examined in more and more detail over the past two decades. Parallel mechanisms are essentially the same design layout, a base, multiple legs/limbs, and a moving platform with a single end-effector to allow the mechanism to complete its desired function. Recently, several research groups have begun looking into multiple-platform parallel mechanisms and/or multiple end-effectors for parallel mechanisms. The reason for the research in this new form of parallel mechanism stems from multiple sources, such as applications that would require multiple handling points being accessed simultaneously, a more controlled gripper motion by having the jaws of the gripper being attached at different platforms, or to increasing the workload of the mechanism. The aim of the thesis is to modify the design process of parallel mechanisms so that it will support the development of a new parallel mechanism with multiple platforms capable of moving relative to each other in at least 1-DOF and to analyse the improvements made on the traditional single platform mechanism through a comparison of the power requirements for each mechanism. Throughout the thesis, a modified approach to the type synthesis of a parallel mechanism with multiple moving platforms is proposed and used to create several case study mechanisms. Additionally, this thesis presents a new series of methods for determining the workspace, inverse kinematic and dynamic models, and the integration of these systems into the design of a control system. All methods are vetted through case studies where they are judged based on the results gained from existing published data. Lastly, the concepts in this thesis are combined to produce a physical multi-platform parallel mechanism case study with the process being developed at each stage. Finally, a series of proposed topics of future research are listed along with the limitations and contributions of this work

Natural Motion for Energy Saving in Robotic and Mechatronic Systems

Energy saving in robotic and mechatronic systems is becoming an evermore important topic in both industry and academia. One strategy to reduce the energy consumption, especially for cyclic tasks, is exploiting natural motion. We define natural motion as the system response caused by the conversion of potential elastic energy into kinetic energy. This motion can be both a forced response assisted by a motor or a free response. The application of the natural motion concepts allows for energy saving in tasks characterized by repetitive or cyclic motion. This review paper proposes a classification of several approaches to natural motion, starting from the compliant elements and the actuators needed for its implementation. Then several approaches to natural motion are discussed based on the trajectory followed by the system, providing useful information to the researchers dealing with natural motion