Comparing the impact of power supply voltage on CMOS-and FinFET-based SRAMs in the presence of resistive defects

CMOS technology scaling has reached its limit at the 22 nm technology node due to several factors including Process Variations (PV), increased leakage current, Random Dopant Fluctuation (RDF), and mainly the Short-Channel Effect (SCE). In order to continue the miniaturization process via technology down-scaling while preserving system reliability and performance, Fin Field-Effect Transistors (FinFETs) arise as an alternative to CMOS transistors. In parallel, Static Random-Access Memories (SRAMs) increasingly occupy great part of Systems-on-Chips’ (SoCs) silicon area, making their reliability an important issue. SRAMs are designed to reach densities at the limit of the manufacturing process, making this component susceptible to manufacturing defects, including the resistive ones. Such defects may cause dynamic faults during the circuits’ lifetime, an important cause of test escape. Thus, the identification of the proper faulty behavior taking different operating conditions into account is considered crucial to guarantee the development of more suitable test methodologies. In this context, a comparison between the behavior of a 22 nm CMOS-based and a 20 nm FinFET-based SRAM in the presence of resistive defects is carried out considering different power supply voltages. In more detail, the behavior of defective cells operating under different power supply voltages has been investigated performing SPICE simulations. Results show that the power supply voltage plays an important role in the faulty behavior of both CMOS- and FinFET-based SRAM cells in the presence of resistive defects but demonstrate to be more expressive when considering the FinFET-based memories. Studying different operating temperatures, the results show an expressively higher occurrence of dynamic faults in FinFET-based SRAMs when compared to CMOS technology

Novel dual-threshold voltage FinFETs for circuit design and optimization

A great research effort has been invested on finding alternatives to CMOS that have better process variation and subthreshold leakage. From possible candidates, FinFET is the most compatible with respect to CMOS and it has shown promising leakage and speed performance. This thesis introduces basic characteristics of FinFETs and the effects of FinFET physical parameters on their performance are explained quantitatively. I show how dual- V th independent-gate FinFETs can be fabricated by optimizing their physical parameters. Optimum values for these physical parameters are derived using the physics-based University of Florida SPICE model for double-gate devices, and the optimized FinFETs are simulated and validated using Sentaurus TCAD simulations. Dual-14, FinFETs with independent gates enable series and parallel merge transformations in logic gates, realizing compact low power alternative gates with competitive performance and reduced input capacitance in comparison to conventional FinFET gates. Furthermore, they also enable the design of a new class of compact logic gates with higher expressive power and flexibility than CMOS gates. Synthesis results for 16 benchmark circuits from the ISCAS and OpenSPARC suites indicate that on average at 2GHz and 75°C, the library that contains the novel gates reduces total power and the number of fins by 36% and 37% respectively, over a conventional library that does not have novel gates in the 32nm technology

Towards Energy-Efficient and Reliable Computing: From Highly-Scaled CMOS Devices to Resistive Memories

The continuous increase in transistor density based on Moore\u27s Law has led us to highly scaled Complementary Metal-Oxide Semiconductor (CMOS) technologies. These transistor-based process technologies offer improved density as well as a reduction in nominal supply voltage. An analysis regarding different aspects of 45nm and 15nm technologies, such as power consumption and cell area to compare these two technologies is proposed on an IEEE 754 Single Precision Floating-Point Unit implementation. Based on the results, using the 15nm technology offers 4-times less energy and 3-fold smaller footprint. New challenges also arise, such as relative proportion of leakage power in standby mode that can be addressed by post-CMOS technologies. Spin-Transfer Torque Random Access Memory (STT-MRAM) has been explored as a post-CMOS technology for embedded and data storage applications seeking non-volatility, near-zero standby energy, and high density. Towards attaining these objectives for practical implementations, various techniques to mitigate the specific reliability challenges associated with STT-MRAM elements are surveyed, classified, and assessed herein. Cost and suitability metrics assessed include the area of nanomagmetic and CMOS components per bit, access time and complexity, Sense Margin (SM), and energy or power consumption costs versus resiliency benefits. In an attempt to further improve the Process Variation (PV) immunity of the Sense Amplifiers (SAs), a new SA has been introduced called Adaptive Sense Amplifier (ASA). ASA can benefit from low Bit Error Rate (BER) and low Energy Delay Product (EDP) by combining the properties of two of the commonly used SAs, Pre-Charge Sense Amplifier (PCSA) and Separated Pre-Charge Sense Amplifier (SPCSA). ASA can operate in either PCSA or SPCSA mode based on the requirements of the circuit such as energy efficiency or reliability. Then, ASA is utilized to propose a novel approach to actually leverage the PV in Non-Volatile Memory (NVM) arrays using Self-Organized Sub-bank (SOS) design. SOS engages the preferred SA alternative based on the intrinsic as-built behavior of the resistive sensing timing margin to reduce the latency and power consumption while maintaining acceptable access time

Cross-Layer Resiliency Modeling and Optimization: A Device to Circuit Approach

The never ending demand for higher performance and lower power consumption pushes the VLSI industry to further scale the technology down. However, further downscaling of technology at nano-scale leads to major challenges. Reduced reliability is one of them, arising from multiple sources e.g. runtime variations, process variation, and transient errors. The objective of this thesis is to tackle unreliability with a cross layer approach from device up to circuit level

Evaluating Architectural, Redundancy, and Implementation Strategies for Radiation Hardening of FinFET Integrated Circuits

In this article, authors explore radiation hardening techniques through the design of a test chip implemented in 16-nm FinFET technology, along with architectural and redundancy design space exploration of its modules. Nine variants of matrix multiplication were taped out and irradiated with neutrons. The results obtained from the neutron campaign revealed that the radiation-hardened variants present superior resiliency when either local or global triple modular redundancy (TMR) schemes are employed. Furthermore, simulation-based fault injection was utilized to validate the measurements and to explore the effects of different implementation strategies on failure rates. We further show that the interplay between these different implementation strategies is not trivial to capture and that synthesis optimizations can effectively break assumptions about the effectiveness of redundancy schemes

Fault Modeling in Controllable Polarity Silicon Nanowire Circuits

Controllable polarity silicon nanowire transistors are among the promising candidates to replace current CMOS in the near future owing to their superior electrostatic characteristics and advanced functionalities. From a circuit testing point of view, it is unclear if the current CMOS and Fin-FET fault models are comprehensive enough to model all defects of controllable polarity nanowires. In this paper, we deal with the above problem using inductive fault analysis on three-independent-gate silicon nanowire FETs. Simulations revealed that the current fault models, i.e. stuck-open faults, are insufficient to cover all modes of operation. The newly introduced test algorithm for stuck open can adequately capture the malfunction behavior of controllable polarity logic gates in the presence of nanowire break and bridge on polarity terminals

From Defect Analysis to Gate-Level Fault Modeling of Controllable-Polarity Silicon Nanowires

Controllable-Polarity Silicon Nanowire Transistors (CP-SiNWFETs) are among the promising candidates to complement or even replace the current CMOS technology in the near future. Polarity control is a desirable property that allows the on-line configuration of the device polarity. CP-SiNWFETs result in smaller and faster logic gates unachievable with conventional CMOS implementations. From a circuit testing point of view, it is unclear if the current CMOS and FinFET fault models are comprehensive enough to model all the defects of CP-SiNWFETs. In this paper, we explore the possible manufacturing defects of this technology through analyzing the fabrication steps and the layout structure of logic gates. Using the obtained defects, we then evaluate their impacts on the performance and the functionality of CP-SiNWFET logic gates. Out of the results, we extend the current fault model to a new a hybrid model, including stuck-at ptype and stuck-at n-type, which can be efficiently used to test the logic circuits in this technology. The newly introduced fault model can be utilized to adequately capture the malfunction behavior of CP logic gates in the presence of nanowire break, bridge and float defects. Moreover, the simulations revealed that the current CMOS test methods are insufficient to cover all faults, i.e., stuck- Open. We proposed an appropriate test method to capture such faults as well

Toward Fault-Tolerant Applications on Reconfigurable Systems-on-Chip

L'abstract è presente nell'allegato / the abstract is in the attachmen