Mobility-adaptive clustering and network-layer multicasting in mobile ad hoc networks

Ph.DDOCTOR OF PHILOSOPH

Interference Reduction in Mobile Ad Hoc and Sensor Networks

There are still a lot of open questions in the field of MANETs and sensor networks. If a topology incurs a large interference, either many communication signals sent by nodes will collide, or the network may experience a serious delay at delivering the data for some nodes, and even consume more energy. So, we reach to the conclusion that interference imposes a potential negative impact on the performance of wireless networks. In the last few years, researchers actively explored topology control approaches for such networks. The motivation of topology control (TC) is to maintain the connectivity of the network, reduce the node degree and thereby reduce the interference, and reduce power consumption in the sensor nodes. Some literatures have pointed out that a node can interfere with another node even if it is beyond its communication range. To improve the network performance, designing topology control algorithms with consideration of interference is imminent and necessary. Since, it leads to fewer collisions and packet retransmissions, which indirectly reduces the power consumption and extends the lifetime of the network. In this thesis, we propose a new interference-aware connected dominating set-based topology construction algorithm, namely, IACDS algorithm, a simple, distributed, interference-aware and energy-efficient topology construction mechanism that finds a sub-optimal Connected Dominating Set (CDS) to turn unnecessary nodes off while keeping the network connected and providing complete communication coverage with minimum interference. IACDS algorithm utilizes a weighted (distance-energy-interference)-based metric that permits the network operator to trade off the lengths of the branches (distance) for the robustness and durability of the topology (energy and interference)

Distributed resource discovery: architectures and applications in mobile networks

As the amount of digital information and services increases, it becomes increasingly important to be able to locate the desired content. The purpose of a resource discovery system is to allow available resources (information or services) to be located using a user-defined search criterion. This work studies distributed resource discovery systems that guarantee all existing resources to be found and allow a wide range of complex queries. Our goal is to allocate the load uniformly between the participating nodes, or alternatively to concentrate the load in the nodes with the highest available capacity. The first part of the work examines the performance of various existing unstructured architectures and proposes new architectures that provide features especially valuable in mobile networks. To reduce the network traffic, we use indexing, which is particularly useful in scenarios, where searches are frequent compared to resource modifications. The ratio between the search and update frequencies determines the optimal level of indexing. Based on this observation, we develop an architecture that adjusts itself to changing network conditions and search behavior while maintaining optimal indexing. We also propose an architecture based on large-scale indexing that we later apply to resource sharing within a user group. Furthermore, we propose an architecture that relieves the topology constraints of the Parallel Index Clustering architecture. The performance of the architectures is evaluated using simulation. In the second part of the work we apply the architectures to two types of mobile networks: cellular networks and ad hoc networks. In the cellular network, we first consider scenarios where multiple commercial operators provide a resource sharing service, and then a scenario where the users share resources without operator support. We evaluate the feasibility of the mobile peer-to-peer concept using user opinion surveys and technical performance studies. Based on user input we develop access control and group management algorithms for peer-to-peer networks. The technical evaluation is performed using prototype implementations. In particular, we examine whether the Session Initiation Protocol can be used for signaling in peer-to-peer networks. Finally, we study resource discovery in an ad hoc network. We observe that in an ad hoc network consisting of consumer devices, the capacity and mobility among nodes vary widely. We utilize this property in order to allocate the load to the high-capacity nodes, which serve lower-capacity nodes. We propose two methods for constructing a virtual backbone connecting the nodes

Graph-theoretic channel modeling and topology control protocols for wireless sensor networks

This report addresses two different research problems: (i) It presents a wireless channel model that reduces the complexity associated with high order Markov chains; and (ii) presents energy efficient topology control protocols which provide reliability while maintaining the topology in an energy efficient manner. For the above problems, real wireless sensor network traces were collected and extensive simulations were performed for evaluating the proposed protocols. Accurate simulation and analysis of wireless networks are inherently dependent on accurate models which are able to provide real-time channel characterization. High-order Markov chains are typically used to model errors and losses over wireless channels. However, complexity (i.e., the number of states) of a high-order Markov model increases exponentially with the memory-length of the underlying channel. In this report, a novel graph-theoretic methodology that uses Hamiltonian circuits to reduce the complexity of a high-order Markov model to a desired state budget is presented. The implication of unused states in complexity reduction of higher order Markov model is also explained. The trace-driven performance evaluations for real wireless local area network (WLAN) and wireless sensor network (WSN) channels demonstrate that the proposed Hamiltonian Model, while providing orders of magnitude reduction in complexity, renders an accuracy that is comparable to the Markov model and better than the existing reduced state models. Furthermore, a methodology to preserve energy is presented to increase the network lifetime by reducing the node degree forming an active backbone while considering network connectivity. However, in energy stringent wireless sensor networks, it is of utmost importance to construct the reduced topology with the minimal control overhead. Moreover, most wireless links in practice are lossy links with connectivity probability which desires that a routing protocol provides routing flexibility and reliability at a minimum energy consumption cost. For this purpose, distributed and semi-distributed novel graph-theoretic topology construction protocols are presented that exploit cliques and polygons in a WSN to achieve energy efficiency and reliability. The proposed protocols also facilitate load rotation under topology maintenance, thereby extending the network lifetime. In addition to the above, the report also evaluates why the backbone construction using connected dominating set (CDS) in certain cases remains unable to provide connected sensing coverage in the area covered. For this purpose, a novel protocol that reduces the topology while considering sensing area coverage is presented

5. GI/ITG KuVS Fachgespräch "Drahtlose Sensornetze"

These are the proceedings of the 5th GI/ITG KuVS Fachgespräch “Drahtlose Sensornetze” (expert talk on wireless sensor networks) held at the Universität Stuttgart in July, 2006. The program included among others papers on sensor network hardware, routing, middleware, localization, programming abstractions and modelling. While the presentations were given in German most of the papers are in English.Dies sind die Proceedings des 5. GI/ITG KuVS Fachgespräch „Drahtlose Sensornetze“, welches im Juli 2006 an der Universität Stuttgart stattgefunden hat. Das Programm spannte einen Bogen von der Hardware über die Themen Routing, Middleware und Lokalisierung bis hin zu Programmierabstraktionen und Modellierung

Voyager capsule phase B. Volume IV - Entry science package. Part H - Reliability. Part I - Planetary quarantine, Part J - Operational support equipment. Part K - Interface alternatives Final report

Reliability, planetary quarantine, support equipment, and interface alternatives of Voyager entry science package for Mars atmosphere prob

InfoTech Update, Volume 10, Number 3, May/June 2002

https://egrove.olemiss.edu/aicpa_news/4992/thumbnail.jp

Impacts of Mobility Models on RPL-Based Mobile IoT Infrastructures: An Evaluative Comparison and Survey

With the widespread use of IoT applications and the increasing trend in the number of connected smart devices, the concept of routing has become very challenging. In this regard, the IPv6 Routing Protocol for Low-power and Lossy Networks (PRL) was standardized to be adopted in IoT networks. Nevertheless, while mobile IoT domains have gained significant popularity in recent years, since RPL was fundamentally designed for stationary IoT applications, it could not well adjust with the dynamic fluctuations in mobile applications. While there have been a number of studies on tuning RPL for mobile IoT applications, but still there is a high demand for more efforts to reach a standard version of this protocol for such applications. Accordingly, in this survey, we try to conduct a precise and comprehensive experimental study on the impact of various mobility models on the performance of a mobility-aware RPL to help this process. In this regard, a complete and scrutinized survey of the mobility models has been presented to be able to fairly justify and compare the outcome results. A significant set of evaluations has been conducted via precise IoT simulation tools to monitor and compare the performance of the network and its IoT devices in mobile RPL-based IoT applications under the presence of different mobility models from different perspectives including power consumption, reliability, latency, and control packet overhead. This will pave the way for researchers in both academia and industry to be able to compare the impact of various mobility models on the functionality of RPL, and consequently to design and implement application-specific and even a standard version of this protocol, which is capable of being employed in mobile IoT applications