Pseudo-functional testing: bridging the gap between manufacturing test and functional operation.

Yuan, Feng.Thesis (M.Phil.)--Chinese University of Hong Kong, 2009.Includes bibliographical references (leaves 60-65).Abstract also in Chinese.Abstract --- p.iAcknowledgement --- p.iiChapter 1 --- Introduction --- p.1Chapter 1.1 --- Manufacturing Test --- p.1Chapter 1.1.1 --- Functional Testing vs. Structural Testing --- p.2Chapter 1.1.2 --- Fault Model --- p.3Chapter 1.1.3 --- Automatic Test Pattern Generation --- p.4Chapter 1.1.4 --- Design for Testability --- p.6Chapter 1.2 --- Pseudo-Functional Manufacturing Test --- p.13Chapter 1.3 --- Thesis Motivation and Organization --- p.16Chapter 2 --- On Systematic Illegal State Identification --- p.19Chapter 2.1 --- Introduction --- p.19Chapter 2.2 --- Preliminaries and Motivation --- p.20Chapter 2.3 --- What is the Root Cause of Illegal States? --- p.22Chapter 2.4 --- Illegal State Identification Flow --- p.26Chapter 2.5 --- Justification Scheme Construction --- p.30Chapter 2.6 --- Experimental Results --- p.34Chapter 2.7 --- Conclusion --- p.35Chapter 3 --- Compression-Aware Pseudo-Functional Testing --- p.36Chapter 3.1 --- Introduction --- p.36Chapter 3.2 --- Motivation --- p.38Chapter 3.3 --- Proposed Methodology --- p.40Chapter 3.4 --- Pattern Generation in Compression-Aware Pseudo-Functional Testing --- p.42Chapter 3.4.1 --- Circuit Pre-Processing --- p.42Chapter 3.4.2 --- Pseudo-Functional Random Pattern Generation with Multi-Launch Cycles --- p.43Chapter 3.4.3 --- Compressible Test Pattern Generation for Pseudo-Functional Testing --- p.45Chapter 3.5 --- Experimental Results --- p.52Chapter 3.5.1 --- Experimental Setup --- p.52Chapter 3.5.2 --- Results and Discussion --- p.54Chapter 3.6 --- Conclusion --- p.56Chapter 4 --- Conclusion and Future Work --- p.58Bibliography --- p.6

A Functional Approach for Testing the Reorder Buffer Memory

Superscalar processors may have the ability to execute instructions out-of-order to better exploit the internal hardware and to maximize the performance. To maintain the in-order instructions commitment and to guarantee the correctness of the final results (as well as precise exception management), the Reorder Buffer (ROB) is used. From the architectural point of view, the ROB is a memory array of several thousands of bits that must be tested against hardware faults to ensure a correct behavior of the processor. Since it is deeply embedded within the microprocessor circuitry, the most straightforward approach to test the ROB is through Built-In Self-Test solutions, which are typically adopted by manufacturers for end-of-production test. However, these solutions may not always be used for the test during the operational phase (in-field test) which aims at detecting possible hardware faults arising when the electronic systems works in its target environment. In fact, these solutions require the usage of test infrastructures that may not be accessible and/or documented, or simply not usable during the operational phase. This paper proposes an alternative solution, based on a functional approach, in which the test is performed by forcing the processor to execute a specially written test program, and checking the behavior of the processor. This approach can be adopted for in-field test, e.g., at the power-on, power-off, or during the time slots unused by the system application. The method has been validated resorting to both an architectural and a memory fault simulator

New techniques for functional testing of microprocessor based systems

Electronic devices may be affected by failures, for example due to physical defects. These defects may be introduced during the manufacturing process, as well as during the normal operating life of the device due to aging. How to detect all these defects is not a trivial task, especially in complex systems such as processor cores. Nevertheless, safety-critical applications do not tolerate failures, this is the reason why testing such devices is needed so to guarantee a correct behavior at any time. Moreover, testing is a key parameter for assessing the quality of a manufactured product. Consolidated testing techniques are based on special Design for Testability (DfT) features added in the original design to facilitate test effectiveness. Design, integration, and usage of the available DfT for testing purposes are fully supported by commercial EDA tools, hence approaches based on DfT are the standard solutions adopted by silicon vendors for testing their devices. Tests exploiting the available DfT such as scan-chains manipulate the internal state of the system, differently to the normal functional mode, passing through unreachable configurations. Alternative solutions that do not violate such functional mode are defined as functional tests. In microprocessor based systems, functional testing techniques include software-based self-test (SBST), i.e., a piece of software (referred to as test program) which is uploaded in the system available memory and executed, with the purpose of exciting a specific part of the system and observing the effects of possible defects affecting it. SBST has been widely-studies by the research community for years, but its adoption by the industry is quite recent. My research activities have been mainly focused on the industrial perspective of SBST. The problem of providing an effective development flow and guidelines for integrating SBST in the available operating systems have been tackled and results have been provided on microprocessor based systems for the automotive domain. Remarkably, new algorithms have been also introduced with respect to state-of-the-art approaches, which can be systematically implemented to enrich SBST suites of test programs for modern microprocessor based systems. The proposed development flow and algorithms are being currently employed in real electronic control units for automotive products. Moreover, a special hardware infrastructure purposely embedded in modern devices for interconnecting the numerous on-board instruments has been interest of my research as well. This solution is known as reconfigurable scan networks (RSNs) and its practical adoption is growing fast as new standards have been created. Test and diagnosis methodologies have been proposed targeting specific RSN features, aimed at checking whether the reconfigurability of such networks has not been corrupted by defects and, in this case, at identifying the defective elements of the network. The contribution of my work in this field has also been included in the first suite of public-domain benchmark networks

Improving timing verification and delay testing methodologies for IC designs

textThe task of ensuring the correct temporal behavior of IC designs, both before and after fabrication, is extremely important. It is becoming even more imperative as the demand for performance increases and process technology advances into the deep sub-micron region. This dissertation tackles the key issues in the timing verification and delay testing methodologies. An efficient methodology is presented to identify false timing paths in the timing verification methodology which utilizes ATPG technique and timing information from an ordered list of timing paths according to the delay information. This dissertation also presents a speed binning methodology which utilizes structural delay tests successfully instead of functional tests. In addition, it establishes a methodology which quantifies the correlation between the timing verification prediction and actual silicon measurement of timing paths. This quantification methodology lays the foundation for further research to study the impact of deep submicron effects on design performanceElectrical and Computer Engineerin