Vector coprocessor sharing techniques for multicores: performance and energy gains

Vector Processors (VPs) created the breakthroughs needed for the emergence of computational science many years ago. All commercial computing architectures on the market today contain some form of vector or SIMD processing. Many high-performance and embedded applications, often dealing with streams of data, cannot efficiently utilize dedicated vector processors for various reasons: limited percentage of sustained vector code due to substantial flow control; inherent small parallelism or the frequent involvement of operating system tasks; varying vector length across applications or within a single application; data dependencies within short sequences of instructions, a problem further exacerbated without loop unrolling or other compiler optimization techniques. Additionally, existing rigid SIMD architectures cannot tolerate efficiently dynamic application environments with many cores that may require the runtime adjustment of assigned vector resources in order to operate at desired energy/performance levels. To simultaneously alleviate these drawbacks of rigid lane-based VP architectures, while also releasing on-chip real estate for other important design choices, the first part of this research proposes three architectural contexts for the implementation of a shared vector coprocessor in multicore processors. Sharing an expensive resource among multiple cores increases the efficiency of the functional units and the overall system throughput. The second part of the dissertation regards the evaluation and characterization of the three proposed shared vector architectures from the performance and power perspectives on an FPGA (Field-Programmable Gate Array) prototype. The third part of this work introduces performance and power estimation models based on observations deduced from the experimental results. The results show the opportunity to adaptively adjust the number of vector lanes assigned to individual cores or processing threads in order to minimize various energy-performance metrics on modern vector- capable multicore processors that run applications with dynamic workloads. Therefore, the fourth part of this research focuses on the development of a fine-to-coarse grain power management technique and a relevant adaptive hardware/software infrastructure which dynamically adjusts the assigned VP resources (number of vector lanes) in order to minimize the energy consumption for applications with dynamic workloads. In order to remove the inherent limitations imposed by FPGA technologies, the fifth part of this work consists of implementing an ASIC (Application Specific Integrated Circuit) version of the shared VP towards precise performance-energy studies involving high- performance vector processing in multicore environments

Hardware Implementation Of Processor Allocator For Mesh Connected Chip Multiprocessors

The advancements in the semiconductor process technology and the current demand for highly parallel computing has led to the advent of Chip Multiprocessors (CMPs). CMP is the integration of two or more independent processor cores, which can read and execute program instructions, on to a single integrated circuit die. CMPs are the main computing platforms for research and development in parallel and high performance computing environments. They offer minimum inter-core communication latencies as the processor cores are present on a single chip. The Operating System (OS) plays a key role in using a CMP effectively. The OS should support a multi-user environment in which the jobs are executed in parallel on different cores. This is handled by the processor management system of the OS. The Processor Management System consists of Job Scheduler (JS) and Processor Allocator (PA). The JS aligns the jobs in a queue in an order which is determined by the scheduling policy employed and thus specifying the job that is to be executed next. The PA deals with the selection of appropriate set of processors to execute the job scheduled by the job scheduler. Efficient design of a PA is crucial if one is to harness the full computational power of a CMP in large parallel computing systems. This thesis deals with the processor allocation part of the processor management system. The motive of this thesis is the hardware implementation of a PA for a mesh-connected CMP. The PA is implemented and a synthesis report is presented which shows the amount of logic utilized. Many contiguous and non-contiguous allocation strategies have been proposed for mesh networks in the recent years. The Improvised First Fit algorithm is used to select the appropriate set of processors for executing an incoming job in this hardware implementation. This algorithm is a contiguous allocation algorithm and has complete sub-mesh recognition ability and uses a bit-map approach. The JS is assumed to be employing a First Come First Serve (FCFS) policy to schedule the jobs. This thesis also acts as the basis for the hardware implementation of PA that uses other allocation algorithms in different topologies

Heterogeneous multicore systems for signal processing

This thesis explores the capabilities of heterogeneous multi-core systems, based on multiple Graphics Processing Units (GPUs) in a standard desktop framework. Multi-GPU accelerated desk side computers are an appealing alternative to other high performance computing (HPC) systems: being composed of commodity hardware components fabricated in large quantities, their price-performance ratio is unparalleled in the world of high performance computing. Essentially bringing “supercomputing to the masses”, this opens up new possibilities for application fields where investing in HPC resources had been considered unfeasible before. One of these is the field of bioelectrical imaging, a class of medical imaging technologies that occupy a low-cost niche next to million-dollar systems like functional Magnetic Resonance Imaging (fMRI). In the scope of this work, several computational challenges encountered in bioelectrical imaging are tackled with this new kind of computing resource, striving to help these methods approach their true potential. Specifically, the following main contributions were made: Firstly, a novel dual-GPU implementation of parallel triangular matrix inversion (TMI) is presented, addressing an crucial kernel in computation of multi-mesh head models of encephalographic (EEG) source localization. This includes not only a highly efficient implementation of the routine itself achieving excellent speedups versus an optimized CPU implementation, but also a novel GPU-friendly compressed storage scheme for triangular matrices. Secondly, a scalable multi-GPU solver for non-hermitian linear systems was implemented. It is integrated into a simulation environment for electrical impedance tomography (EIT) that requires frequent solution of complex systems with millions of unknowns, a task that this solution can perform within seconds. In terms of computational throughput, it outperforms not only an highly optimized multi-CPU reference, but related GPU-based work as well. Finally, a GPU-accelerated graphical EEG real-time source localization software was implemented. Thanks to acceleration, it can meet real-time requirements in unpreceeded anatomical detail running more complex localization algorithms. Additionally, a novel implementation to extract anatomical priors from static Magnetic Resonance (MR) scansions has been included

Improving the Scalability of High Performance Computer Systems

Improving the performance of future computing systems will be based upon the ability of increasing the scalability of current technology. New paths need to be explored, as operating principles that were applied up to now are becoming irrelevant for upcoming computer architectures. It appears that scaling the number of cores, processors and nodes within an system represents the only feasible alternative to achieve Exascale performance. To accomplish this goal, we propose three novel techniques addressing different layers of computer systems. The Tightly Coupled Cluster technique significantly improves the communication for inter node communication within compute clusters. By improving the latency by an order of magnitude over existing solutions the cost of communication is considerably reduced. This enables to exploit fine grain parallelism within applications, thereby, extending the scalability considerably. The mechanism virtually moves the network interconnect into the processor, bypassing the latency of the I/O interface and rendering protocol conversions unnecessary. The technique is implemented entirely through firmware and kernel layer software utilizing off-the-shelf AMD processors. We present a proof-of-concept implementation and real world benchmarks to demonstrate the superior performance of our technique. In particular, our approach achieves a software-to-software communication latency of 240 ns between two remote compute nodes. The second part of the dissertation introduces a new framework for scalable Networks-on-Chip. A novel rapid prototyping methodology is proposed, that accelerates the design and implementation substantially. Due to its flexibility and modularity a large application space is covered ranging from Systems-on-chip, to high performance many-core processors. The Network-on-Chip compiler enables to generate complex networks in the form of synthesizable register transfer level code from an abstract design description. Our engine supports different target technologies including Field Programmable Gate Arrays and Application Specific Integrated Circuits. The framework enables to build large designs while minimizing development and verification efforts. Many topologies and routing algorithms are supported by partitioning the tasks into several layers and by the introduction of a protocol agnostic architecture. We provide a thorough evaluation of the design that shows excellent results regarding performance and scalability. The third part of the dissertation addresses the Processor-Memory Interface within computer architectures. The increasing compute power of many-core processors, leads to an equally growing demand for more memory bandwidth and capacity. Current processor designs exhibit physical limitations that restrict the scalability of main memory. To address this issue we propose a memory extension technique that attaches large amounts of DRAM memory to the processor via a low pin count interface using high speed serial transceivers. Our technique transparently integrates the extension memory into the system architecture by providing full cache coherency. Therefore, applications can utilize the memory extension by applying regular shared memory programming techniques. By supporting daisy chained memory extension devices and by introducing the asymmetric probing approach, the proposed mechanism ensures high scalability. We furthermore propose a DMA offloading technique to improve the performance of the processor memory interface. The design has been implemented in a Field Programmable Gate Array based prototype. Driver software and firmware modifications have been developed to bring up the prototype in a Linux based system. We show microbenchmarks that prove the feasibility of our design

Framework for simulation of fault tolerant heterogeneous multiprocessor system-on-chip

Due to the ever growing requirement in high performance data computation, current Uniprocessor systems fall short of hand to meet critical real-time performance demands in (i) high throughput (ii) faster processing time (iii) low power consumption (iv) design cost and time-to-market factors and more importantly (v) fault tolerant processing. Shifting the design trend to MPSOCs is a work-around to meet these challenges. However, developing efficient fault tolerant task scheduling and mapping techniques requires optimized algorithms that consider the various scenarios in Multiprocessor environments. Several works have been done in the past few years which proposed simulation based frameworks for scheduling and mapping strategies that considered homogenous systems and error avoidance techniques. However, most of these works inadequately describe today\u27s MPSOC trend because they were focused on the network domain and didn\u27t consider heterogeneous systems with fault tolerant capabilities; In order to address these issues, this work proposes (i) a performance driven scheduling algorithm (PD SA) based on simulated annealing technique (ii) an optimized Homogenous-Workload-Distribution (HWD) Multiprocessor task mapping algorithm which considers the dynamic workload on processors and (iii) a dynamic Fault Tolerant (FT) scheduling/mapping algorithm to employ robust application processing system. The implementation was accompanied by a heterogeneous Multiprocessor system simulation framework developed in systemC/C++. The proposed framework reads user data, set the architecture, execute input task graph and finally generate performance variables. This framework alleviates previous work issues with respect to (i) architectural flexibility in number-of-processors, processor types and topology (ii) optimized scheduling and mapping strategies and (iii) fault-tolerant processing capability focusing more on the computational domain; A set of random as well as application specific STG benchmark suites were run on the simulator to evaluate and verify the performance of the proposed algorithms. The simulations were carried out for (i) scheduling policy evaluation (ii) fault tolerant evaluation (iii) topology evaluation (iv) Number of processor evaluation (v) Mapping policy evaluation and (vi) Processor Type evaluation. The results showed that PD scheduling algorithm showed marginally better performance than EDF with respect to utilization, Execution-Time and Power factors. The dynamic Fault Tolerant implementation showed to be a viable and efficient strategy to meet real-time constraints without posing significant system performance degradation. Torus topology gave better performance than Tile with respect to task completion time and power factors. Executing highly heterogeneous Tasks showed higher power consumption and execution time. Finally, increasing the number of processors showed a decrease in average Utilization but improved task completion time and power consumption; Based on the simulation results, the system designer can compare tradeoffs between a various design choices with respect to the performance requirement specifications. In general, designing an optimized Multiprocessor scheduling and mapping strategy with added fault tolerant capability will enable to develop efficient Multiprocessor systems which meet future performance goal requirements. This is the substance of this work

Hardware Architectures and Implementations for Associative Memories : the Building Blocks of Hierarchically Distributed Memories

During the past several decades, the semiconductor industry has grown into a global industry with revenues around $300 billion. Intel no longer relies on only transistor scaling for higher CPU performance, but instead, focuses more on multiple cores on a single die. It has been projected that in 2016 most CMOS circuits will be manufactured with 22 nm process. The CMOS circuits will have a large number of defects. Especially when the transistor goes below sub-micron, the original deterministic circuits will start having probabilistic characteristics. Hence, it would be challenging to map traditional computational models onto probabilistic circuits, suggesting a need for fault-tolerant computational algorithms. Biologically inspired algorithms, or associative memories (AMs)—the building blocks of cortical hierarchically distributed memories (HDMs) discussed in this dissertation, exhibit a remarkable match to the nano-scale electronics, besides having great fault-tolerance ability. Research on the potential mapping of the HDM onto CMOL (hybrid CMOS/nanoelectronic circuits) nanogrids provides useful insight into the development of non-von Neumann neuromorphic architectures and semiconductor industry. In this dissertation, we investigated the implementations of AMs on different hardware platforms, including microprocessor based personal computer (PC), PC cluster, field programmable gate arrays (FPGA), CMOS, and CMOL nanogrids. We studied two types of neural associative memory models, with and without temporal information. In this research, we first decomposed the computational models into basic and common operations, such as matrix-vector inner-product and k-winners-take-all (k-WTA). We then analyzed the baseline performance/price ratio of implementing the AMs with a PC. We continued with a similar performance/price analysis of the implementations on more parallel hardware platforms, such as PC cluster and FPGA. However, the majority of the research emphasized on the implementations with all digital and mixed-signal full-custom CMOS and CMOL nanogrids. In this dissertation, we draw the conclusion that the mixed-signal CMOL nanogrids exhibit the best performance/price ratio over other hardware platforms. We also highlighted some of the trade-offs between dedicated and virtualized hardware circuits for the HDM models. A simple time-multiplexing scheme for the digital CMOS implementations can achieve comparable throughput as the mixed-signal CMOL nanogrids