90,236 research outputs found
Investigation of the effects of image compression on the geometric quality of digital protogrammetric imagery
We are living in a decade, where the use of digital images is becoming increasingly important. Photographs are now converted into digital form, and direct acquisition of digital images is becoming increasing important as sensors and associated electronics. Unlike images in analogue form, digital representation of images allows visual information to· be easily manipulated in useful ways. One practical problem of the digital image representation is that, it requires a very large number of bits and hence one encounters a fairly large volume of data in a digital production environment if they are stored uncompressed on the disk. With the rapid advances in sensor technology and digital electronics, the number of bits grow larger in softcopy photogrammetry, remote sensing and multimedia GIS. As a result, it is desirable to find efficient representation for digital images in order to reduce the memory required for storage, improve the data access rate from storage devices, and reduce the time required for transfer across communication channels. The component of digital image processing that deals with this problem is called image compression. Image compression is a necessity for the utilisation of large digital images in softcopy photogrammetry, remote sensing, and multimedia GIS. Numerous image Compression standards exist today with the common goal of reducing the number of bits needed to store images, and to facilitate the interchange of compressed image data between various devices and applications. JPEG image compression standard is one alternative for carrying out the image compression task. This standard was formed under the auspices ISO and CCITT for the purpose of developing an international standard for the compression and decompression of continuous-tone, still-frame, monochrome and colour images. The JPEG standard algorithm &Us into three general categories: the baseline sequential process that provides a simple and efficient algorithm for most image coding applications, the extended DCT-based process that allows the baseline system to satisfy a broader range of applications, and an independent lossless process for application demanding that type of compression. This thesis experimentally investigates the geometric degradations resulting from lossy JPEG compression on photogrammetric imagery at various levels of quality factors. The effects and the suitability of JPEG lossy image compression on industrial photogrammetric imagery are investigated. Examples are drawn from the extraction of targets in close-range photogrammetric imagery. In the experiments, the JPEG was used to compress and decompress a set of test images. The algorithm has been tested on digital images containing various levels of entropy (a measure of information content of an image) with different image capture capabilities. Residual data was obtained by taking the pixel-by-pixel difference between the original data and the reconstructed data. The image quality measure, root mean square (rms) error of the residual was used as a quality measure to judge the quality of images produced by JPEG(DCT-based) image compression technique. Two techniques, TIFF (IZW) compression and JPEG(DCT-based) compression are compared with respect to compression ratios achieved. JPEG(DCT-based) yields better compression ratios, and it seems to be a good choice for image compression. Further in the investigation, it is found out that, for grey-scale images, the best compression ratios were obtained when the quality factors between 60 and 90 were used (i.e., at a compression ratio of 1:10 to 1:20). At these quality factors the reconstructed data has virtually no degradation in the visual and geometric quality for the application at hand. Recently, many fast and efficient image file formats have also been developed to store, organise and display images in an efficient way. Almost every image file format incorporates some kind of compression method to manage data within common place networks and storage devices. The current major file formats used in softcopy photogrammetry, remote sensing and · multimedia GIS. were also investigated. It was also found out that the choice of a particular image file format for a given application generally involves several interdependent considerations including quality; flexibility; computation; storage, or transmission. The suitability of a file format for a given purpose is · best determined by knowing its original purpose. Some of these are widely used (e.g., TIFF, JPEG) and serve as exchange formats. Others are adapted to the needs of particular applications or particular operating systems
A Robust Image Hashing Algorithm Resistant Against Geometrical Attacks
This paper proposes a robust image hashing method which is robust against common image processing attacks and geometric distortion attacks. In order to resist against geometric attacks, the log-polar mapping (LPM) and contourlet transform are employed to obtain the low frequency sub-band image. Then the sub-band image is divided into some non-overlapping blocks, and low and middle frequency coefficients are selected from each block after discrete cosine transform. The singular value decomposition (SVD) is applied in each block to obtain the first digit of the maximum singular value. Finally, the features are scrambled and quantized as the safe hash bits. Experimental results show that the algorithm is not only resistant against common image processing attacks and geometric distortion attacks, but also discriminative to content changes
Shape-based defect classification for Non Destructive Testing
The aim of this work is to classify the aerospace structure defects detected
by eddy current non-destructive testing. The proposed method is based on the
assumption that the defect is bound to the reaction of the probe coil impedance
during the test. Impedance plane analysis is used to extract a feature vector
from the shape of the coil impedance in the complex plane, through the use of
some geometric parameters. Shape recognition is tested with three different
machine-learning based classifiers: decision trees, neural networks and Naive
Bayes. The performance of the proposed detection system are measured in terms
of accuracy, sensitivity, specificity, precision and Matthews correlation
coefficient. Several experiments are performed on dataset of eddy current
signal samples for aircraft structures. The obtained results demonstrate the
usefulness of our approach and the competiveness against existing descriptors.Comment: 5 pages, IEEE International Worksho
Spread spectrum-based video watermarking algorithms for copyright protection
Merged with duplicate record 10026.1/2263 on 14.03.2017 by CS (TIS)Digital technologies know an unprecedented expansion in the last years. The consumer can
now benefit from hardware and software which was considered state-of-the-art several years
ago. The advantages offered by the digital technologies are major but the same digital
technology opens the door for unlimited piracy. Copying an analogue VCR tape was certainly
possible and relatively easy, in spite of various forms of protection, but due to the analogue
environment, the subsequent copies had an inherent loss in quality. This was a natural way of
limiting the multiple copying of a video material. With digital technology, this barrier
disappears, being possible to make as many copies as desired, without any loss in quality
whatsoever. Digital watermarking is one of the best available tools for fighting this threat.
The aim of the present work was to develop a digital watermarking system compliant with the
recommendations drawn by the EBU, for video broadcast monitoring. Since the watermark
can be inserted in either spatial domain or transform domain, this aspect was investigated and
led to the conclusion that wavelet transform is one of the best solutions available. Since
watermarking is not an easy task, especially considering the robustness under various attacks
several techniques were employed in order to increase the capacity/robustness of the system:
spread-spectrum and modulation techniques to cast the watermark, powerful error correction
to protect the mark, human visual models to insert a robust mark and to ensure its invisibility.
The combination of these methods led to a major improvement, but yet the system wasn't
robust to several important geometrical attacks. In order to achieve this last milestone, the
system uses two distinct watermarks: a spatial domain reference watermark and the main
watermark embedded in the wavelet domain. By using this reference watermark and techniques
specific to image registration, the system is able to determine the parameters of the attack and
revert it. Once the attack was reverted, the main watermark is recovered. The final result is a
high capacity, blind DWr-based video watermarking system, robust to a wide range of attacks.BBC Research & Developmen
Copyright Protection of Color Imaging Using Robust-Encoded Watermarking
In this paper we present a robust-encoded watermarking method applied to color images for copyright protection, which presents robustness against several geometric and signal processing distortions. Trade-off between payload, robustness and imperceptibility is a very important aspect which has to be considered when a watermark algorithm is designed. In our proposed scheme, previously to be embedded into the image, the watermark signal is encoded using a convolutional encoder, which can perform forward error correction achieving better robustness performance. Then, the embedding process is carried out through the discrete cosine transform domain (DCT) of an image using the image normalization technique to accomplish robustness against geometric and signal processing distortions. The embedded watermark coded bits are extracted and decoded using the Viterbi algorithm. In order to determine the presence or absence of the watermark into the image we compute the bit error rate (BER) between the recovered and the original watermark data sequence. The quality of the watermarked image is measured using the well-known indices: Peak Signal to Noise Ratio (PSNR), Visual Information Fidelity (VIF) and Structural Similarity Index (SSIM). The color difference between the watermarked and original images is obtained by using the Normalized Color Difference (NCD) measure. The experimental results show that the proposed method provides good performance in terms of imperceptibility and robustness. The comparison among the proposed and previously reported methods based on different techniques is also provided
Recommended from our members
A computer-based product classification and component detection for demanufacturing processes
This is an Author's Accepted Manuscript of an article published in International Journal of Computer Integrated
Manufacturing, 24(10), 900-914, 2011 [copyright Taylor & Francis], available online at:
http://www.tandfonline.com/10.1080/0951192X.2011.579169.The aim of this paper is to propose a novel computer-based product classification, component detection and tracking for demanufacturing and disassembly process. This is achieved by introducing a series of automated and sequential product scanning, component identification, image analysis and sorting – leading to the development of a bill of material (BOM). The produced BOM can then be associated with the relevant disassembly/demanufacture proviso. The proposed integrated image sorting and product classification (ISPC) approach can be considered as a step forward in automation of demanufacturing activities. The ISPC model proposed in this paper utilises and builds on the state-of-the-art technology and current body of research in computer-integrated demanufacturing and remanufacturing (CIDR). An appraisal of the latest research material and the factors that inhibit CIDR methods inpractice are presented. A novel solution for the integration of imaging and material identification techniques toovercome some of the existing shortcomings of automated recycling processes is proposed in this paper. The proposed product scanning and component detection ISPC software consists of four distinct models: the repertory database, the search engine, the product-attributes updater and the image sorting and classification algorithm. The software framework that integrates the four components is presented in this paper. Finally, an overall assessment of applying ISPC at various stages of CIDR processes concludes the article.University of Ibadan MacArthur Foundation Gran
Reflectance Transformation Imaging (RTI) System for Ancient Documentary Artefacts
This tutorial summarises our uses of reflectance transformation imaging in archaeological contexts. It introduces the UK AHRC funded project reflectance Transformation Imaging for Anciant Documentary Artefacts and demonstrates imaging methodologies
- …