11 research outputs found
Sequence Design for Cognitive CDMA Communications under Arbitrary Spectrum Hole Constraint
To support interference-free quasi-synchronous code-division multiple-access
(QS-CDMA) communication with low spectral density profile in a cognitive radio
(CR) network, it is desirable to design a set of CDMA spreading sequences with
zero-correlation zone (ZCZ) property. However, traditional ZCZ sequences (which
assume the availability of the entire spectral band) cannot be used because
their orthogonality will be destroyed by the spectrum hole constraint in a CR
channel. To date, analytical construction of ZCZ CR sequences remains open.
Taking advantage of the Kronecker sequence property, a novel family of
sequences (called "quasi-ZCZ" CR sequences) which displays zero
cross-correlation and near-zero auto-correlation zone property under arbitrary
spectrum hole constraint is presented in this paper. Furthermore, a novel
algorithm is proposed to jointly optimize the peak-to-average power ratio
(PAPR) and the periodic auto-correlations of the proposed quasi-ZCZ CR
sequences. Simulations show that they give rise to single-user bit-error-rate
performance in CR-CDMA systems which outperform traditional non-contiguous
multicarrier CDMA and transform domain communication systems; they also lead to
CR-CDMA systems which are more resilient than non-contiguous OFDM systems to
spectrum sensing mismatch, due to the wideband spreading.Comment: 13 pages,10 figures,Accepted by IEEE Journal on Selected Areas in
Communications (JSAC)--Special Issue:Cognitive Radio Nov, 201
Recommended from our members
Advanced Techniques for High-Throughput Cellular Communications
The next generation wireless communication systems require ubiquitous high-throughput mobile connectivity under a range of challenging network settings (urban versus rural, high device density, mobility, etc). To improve the performance of the system, the physical layer design is of great importance. The previous research on improving the physical layer properties includes: a) highly directional transmissions that can enhance the throughput and spatial reuse; b) enhanced MIMO that can eliminate
contention, enabling linear increase of capacity with number of antennas; c) mmWave technologies which operate on GHz bandwidth to over substantially higher throughput; d) better cooperative spectrum sharing with cognitive radios; e) better multiple access method which can mitigate multiuser interference and allow more multi-users.
This dissertation addresses several techniques in the physical layer design of the next generation wireless communication systems. In chapter two, an orthogonal frequency division with code division multiple access (OFDM-CDMA) systems is proposed and a polyphase code is used to improve multiple access performance and make the OFDM signal satisfy the peak to average ratio (PAPR) constraint. Chapter three studies the I/Q imbalance for direct down converter. For wideband transmitter and receiver that use direct conversion for I/Q sampling, the I/Q imbalance becomes a critical issue. With higher I/Q imbalance, there will be higher degradation in quadrature amplitude modulation, which degrades the throughput tremendously. Chapter four investigate a problem of spectrum sharing for cognitive wideband communication. An energy-efficient sub-Nyquist sampling algorithm is developed for optimal sampling and spectrum sensing. In chapter ve, we study the channel estimation of millimeter wave full-dimensional MIMO communication. The problem is formulated as an atomic-norm minimization problem and algorithms are derived for the channel estimation in different situations.
In this thesis, mathematical optimization is applied as the main approach to analyze and solve the problems in the physical layer of wireless communication so that the high-throughput is achieved. The algorithms are derived along with the theoretical analysis, which are validated with numerical results
Dynamical Systems
Complex systems are pervasive in many areas of science integrated in our daily lives. Examples include financial markets, highway transportation networks, telecommunication networks, world and country economies, social networks, immunological systems, living organisms, computational systems and electrical and mechanical structures. Complex systems are often composed of a large number of interconnected and interacting entities, exhibiting much richer global scale dynamics than the properties and behavior of individual entities. Complex systems are studied in many areas of natural sciences, social sciences, engineering and mathematical sciences. This special issue therefore intends to contribute towards the dissemination of the multifaceted concepts in accepted use by the scientific community. We hope readers enjoy this pertinent selection of papers which represents relevant examples of the state of the art in present day research. [...
Towards a Conceptual Design of an Intelligent Material Transport Based on Machine Learning and Axiomatic Design Theory
Reliable and efficient material transport is one of the basic requirements that affect productivity in sheet metal industry. This paper presents a methodology for conceptual design of intelligent material transport using mobile robot, based on axiomatic design theory, graph theory and
artificial intelligence. Developed control algorithm was implemented and tested on the mobile robot system Khepera II within the laboratory model of manufacturing environment. Matlab© software package was used for manufacturing process simulation, implementation of search algorithms and neural network training. Experimental results clearly show that intelligent mobile robot can learn and predict optimal material transport flows thanks to the use of artificial neural networks. Achieved positioning error of mobile robot indicates that conceptual design approach can be used for material transport and handling tasks in intelligent manufacturing systems
Friction Force Microscopy of Deep Drawing Made Surfaces
Aim of this paper is to contribute to micro-tribology understanding and friction in micro-scale
interpretation in case of metal beverage production, particularly the deep drawing process of cans. In order to bridging the gap between engineering and trial-and-error principles, an experimental AFM-based micro-tribological approach is adopted. For that purpose, the can’s surfaces are imaged with atomic force microscopy (AFM) and the frictional force signal is measured with frictional force microscopy (FFM). In both techniques, the sample surface is scanned with a stylus attached to a cantilever. Vertical motion of the cantilever is recorded in AFM and horizontal motion is recorded in FFM. The presented work evaluates friction over a micro-scale on various samples gathered from cylindrical, bottom and round parts of cans, made of same the material but with different deep drawing process parameters. The main idea is to link the experimental observation with the manufacturing process. Results presented here can advance the knowledge in order to comprehend the tribological phenomena at the contact scales, too small for conventional tribology