Demand side control for power system frequency regulation

The increasing penetration of renewable energy resources brings a number of uncertainties to modern power system operation. In particular, the frequent variation of wind or solar power output causes a short-term mismatch between generation and demand and system frequency fluctuation. The traditional approach to dealing with this problem is to increase the amount of system spinning reserve, which increases costs. In recent years, researchers have been actively exploring the utilization of residential and commercial loads in frequency regulation without affecting customers’ comfort level. This is called dynamic demand control (DDC). This dissertation describes an in-depth study of DDC for bulk power system frequency regulation, from both a technical and economic perspective

Fast and Reliable Primary Frequency Reserves From Refrigerators with Decentralized Stochastic Control

Due to increasing shares of renewable energy sources, more frequency reserves are required to maintain power system stability. In this paper, we present a decentralized control scheme that allows a large aggregation of refrigerators to provide Primary Frequency Control (PFC) reserves to the grid based on local frequency measurements and without communication. The control is based on stochastic switching of refrigerators depending on the frequency deviation. We develop methods to account for typical lockout constraints of compressors and increased power consumption during the startup phase. In addition, we propose a procedure to dynamically reset the thermostat temperature limits in order to provide reliable PFC reserves, as well as a corrective temperature feedback loop to build robustness to biased frequency deviations. Furthermore, we introduce an additional randomization layer in the controller to account for thermostat resolution limitations, and finally, we modify the control design to account for refrigerator door openings. Extensive simulations with actual frequency signal data and with different aggregation sizes, load characteristics, and control parameters, demonstrate that the proposed controller outperforms a relevant state-of-the-art controller.Comment: 44 pages, 17 figures, 9 Tables, submitted to IEEE Transactions on Power System

Control and Optimization of Energy Storage in AC and DC Power Grids

Energy storage attracts attention nowadays due to the critical role it will play in the power generation and transportation sectors. Electric vehicles, as moving energy storage, are going to play a key role in the terrestrial transportation sector and help reduce greenhouse emissions. Bulk hybrid energy storage will play another critical role for feeding the new types of pulsed loads on ship power systems. However, to ensure the successful adoption of energy storage, there is a need to control and optimize the charging/discharging process, taking into consideration the customer preferences and the technical aspects. In this dissertation, novel control and optimization algorithms are developed and presented to address the various challenges that arise with the adoption of energy storage in the electricity and transportation sectors. Different decentralized control algorithms are proposed to manage the charging of a mass number of electric vehicles connected to different points of charging in the power distribution system. The different algorithms successfully satisfy the preferences of the customers without negatively impacting the technical constraints of the power grid. The developed algorithms were experimentally verified at the Energy Systems Research Laboratory at FIU. In addition to the charge control of electric vehicles, the optimal allocation and sizing of commercial parking lots are considered. A bi-layer Pareto multi-objective optimization problem is formulated to optimally allocate and size a commercial parking lot. The optimization formulation tries to maximize the profits of the parking lot investor, as well as minimize the losses and voltage deviations for the distribution system operator. Sensitivity analysis to show the effect of the different objectives on the selection of the optimal size and location is also performed. Furthermore, in this dissertation, energy management strategies of the onboard hybrid energy storage for a medium voltage direct current (MVDC) ship power system are developed. The objectives of the management strategies were to maintain the voltage of the MVDC bus, ensure proper power sharing, and ensure proper use of resources, where supercapacitors are used during the transient periods and batteries are used during the steady state periods. The management strategies were successfully validated through hardware in the loop simulation

Opening of Ancillary Service Markets to Distributed Energy Resources: A Review

Electric power systems are moving toward more decentralized models, where energy generation is performed by small and distributed power plants, often from renewables. With the gradual phase out from fossil fuels, however, Distribution Energy Resources (DERs) are expected to take over in the provision of all regulation services required to operate the grid. To this purpose, the opening of national Ancillary Service Markets (ASMs) to DERs is considered an essential passage. In order to allow this transition to happen, current opportunities and barriers to market participation of DERs must be clearly identified. In this work, a comprehensive review is provided of the state-of-the-art of research on DER integration into ASMs. The topic at hand is analyzed from different perspectives. First, the current situation and main trends regarding the reformation processes of national ASMs are analyzed to get a clear picture of the evolutions expected and adjustment required in the future, according to the scientific community. Then, the focus is moved to the strategies to be adopted by aggregators for the effective control and coordination of DERs, exploring the challenges posed by the uncertainties affecting the problem. Coordination schemes between transmission and distribution system operators, and the implications on the grid infrastructure operation and planning, are also investigated. Finally, the review deepens the control capabilities required for DER technologies to perform the needed control actions

Self-Organized Dynamics of Power Grids: Smart Grids, Fluctuations and Cascades

Climate change is one of the most pressing issues of our time and mitigating it requires a reduction of CO2 emissions. A big step towards achieving this goal is increasing the share of renewable energy sources, as the energy sector currently contributes 35% to all greenhouse gas emissions. However, integrating these renewable energy sources challenges the current power system in two major ways. Firstly, renewable generation consists of more spatially distributed and smaller power plants than conventional generation by nuclear or coal plants, questioning the established hierarchical structures and demanding a new grid design. Restructuring becomes necessary because wind and solar plants have to be placed at favorable sites, e.g., close to coasts in the case of wind. Secondly, renewables do not provide a deterministic and controllable power output but introduce power fluctuations that have to be controlled adequately. Many solutions to these challenges are build on the concept of smart grids, which require an extensive information technology (IT) infrastructure communicating between consumers and generators to coordinate efficient actions. However, an intertwined power and IT system raises great privacy and security concerns. Is it possible to forgo a large IT infrastructure in future power grids and instead operate them purely based on local information? How would such a decentrally organized system work? What is the impact of fluctuation on short time scales on the dynamical stability? Which grid topologies are robust against random failures or targeted attacks? This thesis aims to establish a framework of such a self-organized dynamics of a power grid, analyzing its benefits and limitations with respect to fluctuations and discrete events. Instead of a centrally monitored and controlled smart grid, we propose the concept of Decentral Smart Grid Control, translating local power grid frequency information into actions to stabilize the grid. This is not limited to power generators but applies equally to consumers, naturally introducing a demand response. We analyze the dynamical stability properties of this framework using linear stability methods as well as applying numerical simulations to determine the size of the basin of attraction. To do so, we investigate general stability effects and sample network motifs to find that this self-organized grid dynamics is stable for large parameter regimes. However, when the actors of the power grid react to a frequency signal, this reaction has to be sufficiently fast since reaction delays are shown to destabilize the grid. We derive expressions for a maximum delay, which always desynchronizes the system based on a rebound effect, and for destabilizing delays based on resonance effects. These resonance instabilities are cured when the frequency signal is averaged over a few seconds (low-pass filter). Overall, we propose an alternative smart grid model without any IT infrastructure and analyze its stable operating space. Furthermore, we analyze the impact of fluctuations on the power grid. First, we determine the escape time of the grid, i.e., the time until the grid desynchronizes when subject to stochastic perturbations. We simulate these events and derive an analytical expression using Kramer's method, obtaining the scaling of the escape time as a function of the grid inertia, transmitted power, damping etc. Thereby, we identify weak links in networks, which have to be enhanced to guarantee a stable operation. Second, we collect power grid frequency measurements from different regions across the world and evaluate their statistical properties. Distributions are found to be heavy-tailed so that large disturbances are more common than predicted by Gaussian statistics. We model the grid dynamics using a stochastic differential equation to derive the scaling of the fluctuations based on power grid parameters, identifying effective damping as essential in reducing fluctuation risks. This damping may be provided by increased demand control as proposed by Decentral Smart Grid Control. Finally, we investigate discrete events, in particular the failure of a single transmission line, as a complementary form of disturbances. An initial failure of a transmission line leads to additional load on other lines, potentially overloading them and thereby causing secondary outages. Hence, a cascade of failures is induced that propagated through the network, resulting in a large-scale blackout. We investigate these cascades in a combined dynamical and event-driven framework, which includes transient dynamics, in contrast to the often used steady state analysis that only solves static flows in the grid while neglecting any dynamics. Concluding, we identify critical lines, prone to cause cascades when failing, and observe a nearly constant speed of the propagation of the cascade in an appropriate metric. Overall, we investigate the self-organized dynamics of power grids, demonstrating its benefits and limitations. We provide tools to improve current grid operation and outline a smart grid solution that is not reliant on IT. Thereby, we support establishing a 100% renewable energy system

Study and analysis of the use of flexibility in local electricity markets

In this work an introduction to Local Electricity Markets (LEM) was done and afterwards evolutionary algorithms (EAs) such as Differential Evolution (DE), HybridAdaptive Differential Evolution (HyDE), Hybrid-Adaptive Differential Evolution with Decay Function (HyDE-DF) and Vortex Search (VS) were applied to a market model in order to test its efficiency and scalability. Then, the market model was expanded adding a network model from the BISITE laboratory and again tests using the evolutionary algorithms were performed. In more detail, first a literature review is done about distributed generation, load flexibility, LEM and EAs. Then a cost optimization problem in Local Electricity Markets is analyzed considering fixed-term flexibility contracts between the distribution system operator (DSO) and aggregators. In this market structure, the DSO procures flexibility while aggregators of different types (e.g., conventional demand response or thermo-load aggregators) offer the service. Its then solved the proposed model using evolutionary algorithms based on the well-known differential evolution (DE). First, a parameter-tuning analysis is done to assess the impact of the DE parameters on the quality of solutions to the problem. Later, after finding the best set of parameters for the “tuned” DE strategies, we compare their performance with other self-adaptive parameter algorithms, namely the HyDE, HyDE-DF, and VS. Overall, the algorithms are able to find near-optimal solutions to the problem and can be considered an alternative solver for more complex instances of the model. After this a network model, from BISITE laboratory, is added to the problem and new analyses are performed using evolutionary algorithms along with MATPOWER power flow algorithms. Results show that evolutionary algorithms support from simple to complex problems, that is, it is a scalable algorithm, and with these results it is possible to perform analyses of the proposed market model.Neste trabalho foi feita uma introdução aos Mercados Locais de Eletricidade (MLE) e posteriormente foram aplicados algoritmos evolutivos (AEs) como Differential Evolution (DE), Hybrid-Adaptive Differential Evolution (HyDE), Hybrid-Adaptive Differential Evolution with Decay Function (HyDE-DF) e Vortex Search (VS) a um modelo de mercado a fim de testar a sua eficiência e escalabilidade. O modelo de mercado foi expandido adicionando uma rede do laboratório BISITE e novamente foram realizados testes usando os algoritmos evolutivos. Em mais detalhe, no trabalho primeiro foi feita uma revisão bibliográfica sobre geração distribuída, flexibilidade de carga, MLE e AEs. É analisado um problema de optimização de custos nos MLE, considerando contratos de flexibilidade a prazo fixo entre os agentes. O distribuidor adquire flexibilidade enquanto que os agregadores de diferentes tipos (por exemplo, os agregadores convencionais de resposta à procura ou de carga térmica) oferecem o serviço. Resolve-se depois o modelo proposto utilizando AEs baseados na conhecida DE. É feita uma análise de afinação de parâmetros para avaliar o impacto dos parâmetros DE na qualidade das soluções para o problema. Após encontrarmos o melhor conjunto de parâmetros para as estratégias DE "afinadas", comparamos o seu desempenho com outros algoritmos de parâmetros autoadaptáveis, nomeadamente o HyDE, HyDE-DF, e VS. Globalmente, os algoritmos são capazes de encontrar soluções quase óptimas para o problema e podem ser considerados um solucionador alternativo para instâncias mais complexas do modelo. Então um modelo de rede, do laboratório BISITE, é acrescentado ao problema e novas análises são realizadas utilizando algoritmos evolutivos juntamente com algoritmos de fluxo de potência MATPOWER. Os resultados mostram que os algoritmos evolutivos suportam desde problemas simples a complexos, ou seja, é um algoritmo escalável, e com estes resultados é possível realizar análises do modelo de mercado proposto

Flexibility market for congestion management in smart grids

Mención Internacional en el título de doctorCurrent power systems are facing several sustainability challenges to meet the increasing demand of electricity. In addition, there is a global direction to increase the share of renewable energy sources in the power generation mix and energy efficiency. In the face of all such challenges, smart grids were incepted. Smart grids are modernized power systems that integrate state-of-the art communication and information technology to facilitate the bidirectional flow of information and electricity between the supply and demand sides. The resilience of smart grids can pave the way for having more flexibility at the distribution level of the power systems. Demand response (DR) programs are considered one of the sources of system flexibility and it is one of the main components of smart grids. DR can be defined as the willingness of customers to alter their electricity consumption profile in response to price signals. Transmission system operators have been implementing demand response programs in a straightforward fashion for several years now. For example, by having energy prices that are expensive during on-peak periods and low-priced at off-peak periods. Other type of DR programs introduces price signals when grid reliability is compromised and a reduction in energy consumption is necessary. In this way, customers can plan their activities accordingly in order to save money. Now, a new era of technology, artificial intelligence and the so-called “internet of things”, have provided new ways to explore the full potential of demand response, by allowing to alter loads in a much more dynamic and precise manner, thus optimizing the operation of grid assets. This thesis focuses on one of the main types of DR programs which is demand flexibility. Demand flexibility is the ability of the demand-side customers to adjust their load profiles in response to an external market signal. On the short- and medium-term periods, distribution system operators (DSOs) can take advantage of the flexibility of demand to mitigate network congestions caused by increased peaks or high penetration of renewable energy. On the long-term period, DSOs can include demand flexibility in their network expansion planning process for future demand growth. The optimal usage of demand flexibility can help in postponing needed investments for upgrading the networks’ capacity. Demand flexibility can be acquired through market-based solutions which can deliver cost-efficient flexibility services for several market agents by facilitating competition between different flexibility providers. Market mechanisms are considered by policy makers as the optimal solution for flexibility access. With respect to that, this thesis proposes a comprehensive framework for a distribution-level flexibility market, called “Flex-DLM” that enables and facilitates the trading of demand flexibility between the distribution system operator, as the main buyer, and aggregators, as sellers representing flexible consumers. Two types of demand flexibility services were modelled, which are: 1- Up-regulation flexibility (UREG), which corresponds to load decrease volumes, and 2- Down-regulation flexibility (DREG), which corresponds load increase volumes. In addition, the payback effect, which is a common event to the activation of demand flexibility, is considered for both types of flexibility services. Also, the distribution network constraints were modelled, which represents the power flow constraints of the network, which is key to present a realistic model for the flexibility market. In the Flex-DLM, the DSO is considered as the market operator who is responsible of clearing the market, while making sure the network congestions are mitigated. The Flex-DLM operates on two timeframes which are day-ahead and real-time with an objective to provide the DSO with flexibility products that can help it in the congestion management process. In addition to this, the uncertainty of demand is taken into consideration to prevent the DSO from procuring inaccurate amounts of demand flexibility. A new option is introduced in the day-ahead Flex-DLM, called the right-to-use (RtU) that allows the DSO to reserve the right to activate demand flexibility during the day-ahead period for congestions that have low probability of occurrence on the following operation day. In this way, the DSO can call upon this option in real-time if the congestion takes place. Also, the uncertainty behind the customers’ commitment to the flexibility activation requests and amounts is taken into consideration. In this thesis, the decision-making process of the DSO for optimizing its choice of demand flexibility and minimizing its total cost is modelled. Two methods were carried out for the optimization model proposed in this work. The first method follows a deterministic approach, where the objective is to optimize the DSO’s cost and clear the Flex-DLM during the day-ahead period only, without taking into account the uncertainty of demand and the uncertainty of consumers’ participation. The second method follows probabilistic approach, which considers the demand uncertainty during the day-ahead and real-time periods and models the uncertainty behind the customers’ commitment. Both optimization methods were integrated with an optimal power flow (OPF) solver tool in order to check the technical validity of the activated flexibility services and to make sure that the payback effect does not cause further congestions in the network. The advantage of the proposed framework is that it requires minimum regulatory changes and it does not involve the DSO in any electricity trading. Also, the proposed optimization method can be integrated with any OPF solver tool. Different distribution feeders obtained from a distribution network located in Spain were used to check the validity of the proposed framework and the decision-making process. The case studies are divided into two parts: 1- The first part applies the proposed flexibility framework from a deterministic perspective and 2- The second part applies the Flex-DLM framework considering all uncertainties, which corresponds to the probabilistic optimization approach. Finally, to help the DSO in the long-term planning process of its local network, a cost & benefit analysis is carried out to value the economic impact of implementing demand flexibility programs as an alternate solution to conventional network upgradesLos sistemas de energía actuales se enfrentan a varios desafíos de sostenibilidad para satisfacer la creciente demanda de electricidad. Además, existe una clara tendencia a aumentar la proporción de fuentes renovables de energía en la generación de energía y así como hacia la eficiencia energética. Como parte de la respuesta a estos desafíos, se iniciaron las redes inteligentes. Las redes inteligentes son sistemas de energía modernizados que integran tecnología de comunicación e información de última generación para facilitar el flujo bidireccional de información y electricidad entre la oferta y la demanda. La utilización de las redes inteligentes pretende facilitar el empleo de la flexibilidad en la red de distribución de los sistemas eléctricos. Los programas de gestión de la demanda se consideran una de las fuentes de flexibilidad del sistema y es uno de los puntos sobre los que se apoyan las redes inteligentes. La gestión de la demanda se puede definir como la disposición de los clientes a alterar su perfil de consumo de electricidad en respuesta a las señales de precios. Los operadores de sistemas de transporte han estado implementando programas de respuesta a la demanda de manera directa desde hace varios años. Por ejemplo, la diferencia entre precios altos y bajos en el mercado mayorista introduce un incentivo para el consumo en horas de menor precio. Otro tipo de programas de gestión de la demanda introduce señales de precios cuando la fiabilidad de la red se ve comprometida y es necesaria una reducción en el consumo de energía. De esta manera, los consumidores pueden planificar sus actividades en consecuencia para ahorrar costes. Ahora, una nueva era de la tecnología, la inteligencia artificial y el llamado "internet de las cosas" han proporcionado nuevas formas de explorar el potencial completo de la respuesta de la demanda, al permitir alterar las cargas de una manera mucho más dinámica y precisa, optimizando así la utilización de los activos de red. Esta tesis se centra en uno de los principales tipos de programas de DR que es la flexibilidad de la demanda. La flexibilidad de la demanda es la capacidad de los clientes del lado de la demanda para ajustar sus perfiles de carga en respuesta a una señal del mercado externo. En los períodos a corto y mediano plazo, los operadores de sistemas de distribución pueden aprovechar la flexibilidad de la demanda para mitigar las congestiones en la red causadas por el aumento de los picos de demanda o la alta penetración de energía renovable. En el período a largo plazo, los distribuidores pueden incluir la flexibilidad de la demanda en su proceso de planificación de expansión de la red para el crecimiento futuro de la demanda. El uso óptimo de la flexibilidad de la demanda puede ayudar a posponer las inversiones necesarias para mejorar la capacidad de las redes. La flexibilidad de la demanda se puede conseguir mediante soluciones basadas en el mercado que pueden ofrecer servicios de flexibilidad rentables para varios agentes del mercado al facilitar la competencia entre diferentes proveedores de flexibilidad. Los reguladores suelen considerar que son los mecanismos de mercado los que dan la solución óptima para la gestión de la flexibilidad. En relación con estos temas, esta tesis propone un marco integral para un mercado de flexibilidad a en la red de distribución, denominado “Flex-DLM” que permite y facilita el comercio de flexibilidad de demanda entre el operador del sistema de distribución, como el principal comprador, y los agregadores, como vendedores que representan a los consumidores flexibles. Se han modelado dos tipos de servicios de flexibilidad de demanda, que son: 1- Flexibilidad a subir (UREG), que corresponde a un requerimiento disminución de carga, y 2- Flexibilidad a bajar (DREG), que corresponde a un requerimiento de aumento de carga. Además, el efecto de rebote, o consumo posterior al uso de la flexibilidad, que es un fenómeno común tras la activación de la flexibilidad de la demanda, se tiene en cuenta para ambos tipos de servicios de flexibilidad. Además, se han modelado las restricciones de la red de distribución, que representan las restricciones de flujo de potencia de la red, que es clave para presentar un modelo realista para el mercado de flexibilidad. En el mercado Flex-DLM propuesto, se considera al distribuidor como el operador responsable de despejar el mercado, al tiempo que se encarga de mitigar las congestiones de la red. El Flex-DLM opera en dos marcos de tiempo: el diario y el tiempo real con el objetivo de proporcionar al distribuidor productos flexibles que puedan ayudarlo en el proceso de gestión de la congestión. Además de esto, la incertidumbre de la demanda se tiene en cuenta para evitar que el distribuidor adquiera cantidades incorrectas de flexibilidad de la demanda. Se introduce una nueva opción en el Flex-DLM del día siguiente, denominado derecho de uso que le permite al distribuidor reservar el derecho de activar la flexibilidad de la demanda durante el período del día anterior para congestiones que tienen poca probabilidad de ocurrencia en el siguiente día de operación. De esta manera, el distribuidor puede recurrir a esta opción en tiempo real si se produce la congestión. Además, se tiene en cuenta la incertidumbre sobre del compromiso de cumplimiento de los clientes con los requerimientos y las cantidades de energía activadas durante el proceso de gestión de la flexibilidad. En esta tesis, se modela asimismo el proceso de toma de decisiones del DSO para optimizar su elección de flexibilidad de demanda y minimizar su costo total. Se llevaron a cabo dos métodos para el modelo de optimización propuesto en este trabajo. El primer método sigue un enfoque determinista, donde el objetivo es optimizar el coste de la flexibilidad para el distribuidor y eliminar el Flex-DLM solo durante el mercado diario , sin tener en cuenta la incertidumbre de la demanda y la de la participación de los consumidores. El segundo método sigue un enfoque probabilístico, que considera la incertidumbre de la demanda durante los períodos diarios y en tiempo real y modela la incertidumbre del compromiso de los clientes. Ambos métodos de optimización se integraron con una herramienta de solución de flujo de potencia óptimo (OPF) para verificar la validez técnica de los servicios de flexibilidad activados y asegurar que el efecto de recuperación no cause más congestiones en la red. La ventaja del marco propuesto es que requiere cambios regulatorios mínimos y no involucra al DSO en ningún comercio de electricidad. Además, el método de optimización propuesto se puede integrar con cualquier herramienta de solución OPF. Se han utiliado diferentes líneas de distribución obtenidos de una red de distribución ubicada en España para verificar la validez del marco propuesto y el proceso de toma de decisiones. Los estudios de caso se dividen en dos partes: 1- La primera parte aplica el marco de flexibilidad propuesto desde una perspectiva determinista y 2- La segunda parte aplica el marco Flex-DLM considerando todas las incertidumbres, que corresponden al enfoque de optimización probabilística. Finalmente, para ayudar al distribuidor en el proceso de planificación a largo plazo de su red local, se lleva a cabo un análisis coste - beneficio para valorar el impacto económico de la implementación de programas de flexibilidad de la demanda como una solución alternativa a las actualizaciones de red convencionales.Programa Oficial de Doctorado en Ingeniería Eléctrica, Electrónica y AutomáticaPresidente: Hortensia Elena Amaris Duarte.- Secretario: Milan Prodanovic.- Vocal: Barry Patrick Haye