4,443 research outputs found
Recommended from our members
Analysis of millimeter wave and massive MIMO cellular networks
Millimeter wave (mmWave) communication and massive multiple-input multiple-output (MIMO) are promising techniques to increase system capacity in 5G cellular networks. The prior frameworks for conventional cellular systems do not directly apply to analyze mmWave or massive MIMO networks, as (i) mmWave cellular networks differ in the different propagation conditions and hardware constraints; and (ii) with a order of magnitude more antennas than conventional multi-user MIMO systems, massive MIMO systems will be operated in time-division duplex (TDD) mode, which renders pilot contamination a primary limiting factor. In this dissertation, I develop stochastic geometry frameworks to analyze the system-level performance of mmWave, sub-6 GHz massive MIMO, and mmWave massive MIMO cellular networks. The proposed models capture the key features of each technique, and allow for tractable signal-to-interference-plus-noise ratio (SINR) and rate analyses. In the first contribution, I develop an mmWave cellular network model that incorporates the blockage effect and directional beamforming, and analyze the SINR and rate distributions as functions of the base station density, blockage parameters, and antenna geometry. The analytical results demonstrate that with a sufficiently dense base station deployment, mmWave cellular networks are capable to achieve comparable SINR coverage and much higher rates than conventional networks. In my second contribution, I analyze the uplink SINR and rate in sub-6 GHz massive MIMO networks with the incorporation of pilot contamination and fractional power control. Based on the analysis, I show scaling laws between the number of antennas and scheduled users per cell that maintain the uplink signal-to-interference ratio (SIR) distributions are different for maximum ratio combining (MRC) and zero-forcing (ZF) receivers. In my third contribution, I extend the sub-6 GHz massive MIMO model to mmWave frequencies, by incorporating key mmWave features. I leverage the proposed model to investigate the asymptotic SINR performance, when the number of antennas goes to infinity. Numerical results show that mmWave massive MIMO outperforms its sub-6 GHz counterpart in cell throughput with a dense base station deployment, while the reverse can be true with a low base station density.Electrical and Computer Engineerin
Towards a Realistic Assessment of Multiple Antenna HCNs: Residual Additive Transceiver Hardware Impairments and Channel Aging
Given the critical dependence of broadcast channels by the accuracy of
channel state information at the transmitter (CSIT), we develop a general
downlink model with zero-forcing (ZF) precoding, applied in realistic
heterogeneous cellular systems with multiple antenna base stations (BSs).
Specifically, we take into consideration imperfect CSIT due to pilot
contamination, channel aging due to users relative movement, and unavoidable
residual additive transceiver hardware impairments (RATHIs). Assuming that the
BSs are Poisson distributed, the main contributions focus on the derivations of
the upper bound of the coverage probability and the achievable user rate for
this general model. We show that both the coverage probability and the user
rate are dependent on the imperfect CSIT and RATHIs. More concretely, we
quantify the resultant performance loss of the network due to these effects. We
depict that the uplink RATHIs have equal impact, but the downlink transmit BS
distortion has a greater impact than the receive hardware impairment of the
user. Thus, the transmit BS hardware should be of better quality than user's
receive hardware. Furthermore, we characterise both the coverage probability
and user rate in terms of the time variation of the channel. It is shown that
both of them decrease with increasing user mobility, but after a specific value
of the normalised Doppler shift, they increase again. Actually, the time
variation, following the Jakes autocorrelation function, mirrors this effect on
coverage probability and user rate. Finally, we consider space division
multiple access (SDMA), single user beamforming (SU-BF), and baseline
single-input single-output (SISO) transmission. A comparison among these
schemes reveals that the coverage by means of SU-BF outperforms SDMA in terms
of coverage.Comment: accepted in IEEE TV
Modeling and Performance of Uplink Cache-Enabled Massive MIMO Heterogeneous Networks
A significant burden on wireless networks is brought by the uploading of user-generated contents to the Internet by means of applications such as social media. To cope with this mobile data tsunami, we develop a novel multiple-input multiple-output (MIMO) network architecture with randomly located base stations (BSs) a large number of antennas employing cache-enabled uplink transmission. In particular, we formulate a scenario, where the users upload their content to their strongest BSs, which are Poisson point process distributed. In addition, the BSs, exploiting the benefits of massive MIMO, upload their contents to the core network by means of a finite-rate backhaul. After proposing the caching policies, where we propose the modified von Mises distribution as the popularity distribution function, we derive the outage probability and the average delivery rate by taking advantage of tools from the deterministic equivalent and stochastic geometry analyses. Numerical results investigate the realistic performance gains of the proposed heterogeneous cache-enabled uplink on the network in terms of cardinal operating parameters. For example, insights regarding the BSs storage size are exposed. Moreover, the impacts of the key parameters such as the file popularity distribution and the target bitrate are investigated. Specifically, the outage probability decreases if the storage size is increased, while the average delivery rate increases. In addition, the concentration parameter, defining the number of files stored at the intermediate nodes (popularity), affects the proposed metrics directly. Furthermore, a higher target rate results in higher outage because fewer users obey this constraint. Also, we demonstrate that a denser network decreases the outage and increases the delivery rate. Hence, the introduction of caching at the uplink of the system design ameliorates the network performance.Peer reviewe
Cell-Free Massive MIMO versus Small Cells
A Cell-Free Massive MIMO (multiple-input multiple-output) system comprises a
very large number of distributed access points (APs)which simultaneously serve
a much smaller number of users over the same time/frequency resources based on
directly measured channel characteristics. The APs and users have only one
antenna each. The APs acquire channel state information through time-division
duplex operation and the reception of uplink pilot signals transmitted by the
users. The APs perform multiplexing/de-multiplexing through conjugate
beamforming on the downlink and matched filtering on the uplink. Closed-form
expressions for individual user uplink and downlink throughputs lead to max-min
power control algorithms. Max-min power control ensures uniformly good service
throughout the area of coverage. A pilot assignment algorithm helps to mitigate
the effects of pilot contamination, but power control is far more important in
that regard.
Cell-Free Massive MIMO has considerably improved performance with respect to
a conventional small-cell scheme, whereby each user is served by a dedicated
AP, in terms of both 95%-likely per-user throughput and immunity to shadow
fading spatial correlation. Under uncorrelated shadow fading conditions, the
cell-free scheme provides nearly 5-fold improvement in 95%-likely per-user
throughput over the small-cell scheme, and 10-fold improvement when shadow
fading is correlated.Comment: EEE Transactions on Wireless Communications, accepted for publicatio
- …