Fault-tolerant interconnection networks for multiprocessor systems

Interconnection networks represent the backbone of multiprocessor systems. A failure in the network, therefore, could seriously degrade the system performance. For this reason, fault tolerance has been regarded as a major consideration in interconnection network design. This thesis presents two novel techniques to provide fault tolerance capabilities to three major networks: the Baseline network, the Benes network and the Clos network. First, the Simple Fault Tolerance Technique (SFT) is presented. The SFT technique is in fact the result of merging two widely known interconnection mechanisms: a normal interconnection network and a shared bus. This technique is most suitable for networks with small switches, such as the Baseline network and the Benes network. For the Clos network, whose switches may be large for the SFT, another technique is developed to produce the Fault-Tolerant Clos (FTC) network. In the FTC, one switch is added to each stage. The two techniques are described and thoroughly analyzed

A system for routing arbitrary directed graphs on SIMD architectures

There are many problems which can be described in terms of directed graphs that contain a large number of vertices where simple computations occur using data from connecting vertices. A method is given for parallelizing such problems on an SIMD machine model that is bit-serial and uses only nearest neighbor connections for communication. Each vertex of the graph will be assigned to a processor in the machine. Algorithms are given that will be used to implement movement of data along the arcs of the graph. This architecture and algorithms define a system that is relatively simple to build and can do graph processing. All arcs can be transversed in parallel in time O(T), where T is empirically proportional to the diameter of the interconnection network times the average degree of the graph. Modifying or adding a new arc takes the same time as parallel traversal

Introduction to a system for implementing neural net connections on SIMD architectures

Neural networks have attracted much interest recently, and using parallel architectures to simulate neural networks is a natural and necessary application. The SIMD model of parallel computation is chosen, because systems of this type can be built with large numbers of processing elements. However, such systems are not naturally suited to generalized communication. A method is proposed that allows an implementation of neural network connections on massively parallel SIMD architectures. The key to this system is an algorithm permitting the formation of arbitrary connections between the neurons. A feature is the ability to add new connections quickly. It also has error recovery ability and is robust over a variety of network topologies. Simulations of the general connection system, and its implementation on the Connection Machine, indicate that the time and space requirements are proportional to the product of the average number of connections per neuron and the diameter of the interconnection network

Upper Bound Analysis and Routing in Optical Benes Networks

Multistage Interconnection Networks (MIN) are popular in switching and communication applications. It has been used in telecommunication and parallel computing systems for many years. The new challenge facing optical MIN is crosstalk, which is caused by coupling two signals within a switching element. Crosstalk is not too big an issue in the Electrical Domain, but due to the stringent Bit Error Rate (BER) constraint, it is a big major concern in the Optical Domain. In this research dissertation, we will study the blocking probability in the optical network and we will study the deterministic conditions for strictly non-blocking Vertical Stacked Optical Benes Networks (VSOBN) with and without worst-case scenarios. We will establish the upper bound on blocking probability of Vertical Stacked Optical Benes Networks with respect to the number of planes used when the non-blocking requirement is not met. We will then study routing in WDM Benes networks and propose a new routing algorithm so that the number of wavelengths can be reduced. Since routing in WDM optical network is an NP-hard problem, many heuristic algorithms are designed by many researchers to perform this routing. We will also develop a genetic algorithm, simulated annealing algorithm and ant colony technique and apply these AI algorithms to route the connections in WDM Benes network

Bitwise-based Routing Algorithms in Optical Multistage Interconnection Network

Recent advances in electro-optic technologies have made optical communication a promising networking alternative to meet the ever increasing demands of high performance computing communication applications for high channel bandwidth, low communication latency and parallel processing as well. Optical Multistage Interconnection Network (OMIN) is very popular in switching and communication among other types of interconnection networks. A major problem in OMIN is crosstalk, which is caused by coupling two signals within a switching element. Crosstalk problem in a switch is the most prominent factor which reduces the signal-to-noise ratio and restricts the size of network. To avoid crosstalk in OMINs many algorithms have been proposed by many researchers such as the Four Heuristic, Simulated Annealing, Genetic, Remove Last Passes and Zero Algorithms. Under the constraint of avoiding crosstalk, the interests of these algorithms are to find a permutation that uses a minimum number of passes and minimum execution time. Accordingly the objective of this research is to optimize and improve the current algorithms in terms of number of passes and execution time. To achieve such goal, this research follows three approaches. In the first, the Improved Zero algorithm is proposed to solve the problem and secondly, the Bitwise Improved Zero algorithm is developed. Finally Four Heuristic and Difference Increasing and Decreasing routing algorithms based on bitwise operation are established. The results of this study show that Bitwise Improved Zero algorithms reduce the execution time nearly seven times. This reduction is very considerable because the execution time of routing algorithms is very important to route the messages in the networks. Moreover Improved Zero algorithm was shown to be more accurate and efficient compared to other algorithms in terms of the average number of passes and execution time. Furthermore by converting Four Heuristic and Difference Increasing and Decreasing routing algorithms to bitwise algorithms the execution time was improved significantly

Devices and networks for optical switching

This thesis is concerned with some aspects of the application of optics to switching and computing. Two areas are dealt with: the design of switching networks which use optical interconnects, and the development and application of the t-SEED optical logic device. The work on optical interconnects looks at the multistage interconnection network which has been proposed as a hybrid switch using both electronics and optics. It is shown that the architecture can be mapped from one dimensional to two dimensional format, so that the machine makes full use of the space available to the optics. Other mapping rules are described which allow the network to make optimum use of the optical interconnects, and the endpoint is a hybrid optical-electronic machine which should be able to outperform an all-electronic equivalent. The development of the t-SEED optical logic device is described, which is the integration of a phototransistor with a multiple quantum well optical modulator. It is found to be important to have the modulator underneath rather than on top of the transistor to avoid unwanted thyristor action. In order for the transistor to have a high gain the collector must have a low doping level, the exit window in the substrate must be etched all the way to the emitter layer, and the etch must not damage the emitter-base junction. A real optical gain of 1.6 has been obtained, which is higher than has ever been reached before but is not as high as should be possible. Improvements to the device are suggested. A new model of the Fabry-Perot cavity is introduced which helps considerably in the interpretation of experimental measurements made on the quantum well modulators. Also a method of improving the contrast of the multiple quantum well modulator by grading the well widths is proposed which may find application in long wavelength transmission modulators. Some systems which make use of the t-SEED are considered. It is shown that the t-SEED device has the right characteristics for use as a neuron element in the optical implementation of a neural network. A new image processing network for clutter removal in binary images is introduced which uses the t-SEED, and a brief performance analysis suggests that the network may be superior to an all-electronic machine

Flexible LDPC Decoder Architectures

Flexible channel decoding is getting significance with the increase in number of wireless standards and modes within a standard. A flexible channel decoder is a solution providing interstandard and intrastandard support without change in hardware. However, the design of efficient implementation of flexible low-density parity-check (LDPC) code decoders satisfying area, speed, and power constraints is a challenging task and still requires considerable research effort. This paper provides an overview of state-of-the-art in the design of flexible LDPC decoders. The published solutions are evaluated at two levels of architectural design: the processing element (PE) and the interconnection structure. A qualitative and quantitative analysis of different design choices is carried out, and comparison is provided in terms of achieved flexibility, throughput, decoding efficiency, and area (power) consumption