A baseband wireless spectrum hypervisor for multiplexing concurrent OFDM signals

The next generation of wireless and mobile networks will have to handle a significant increase in traffic load compared to the current ones. This situation calls for novel ways to increase the spectral efficiency. Therefore, in this paper, we propose a wireless spectrum hypervisor architecture that abstracts a radio frequency (RF) front-end into a configurable number of virtual RF front ends. The proposed architecture has the ability to enable flexible spectrum access in existing wireless and mobile networks, which is a challenging task due to the limited spectrum programmability, i.e., the capability a system has to change the spectral properties of a given signal to fit an arbitrary frequency allocation. The proposed architecture is a non-intrusive and highly optimized wireless hypervisor that multiplexes the signals of several different and concurrent multi-carrier-based radio access technologies with numerologies that are multiple integers of one another, which are also referred in our work as radio access technologies with correlated numerology. For example, the proposed architecture can multiplex the signals of several Wi-Fi access points, several LTE base stations, several WiMAX base stations, etc. As it able to multiplex the signals of radio access technologies with correlated numerology, it can, for instance, multiplex the signals of LTE, 5G-NR and NB-IoT base stations. It abstracts a radio frequency front-end into a configurable number of virtual RF front ends, making it possible for such different technologies to share the same RF front-end and consequently reduce the costs and increasing the spectral efficiency by employing densification, once several networks share the same infrastructure or by dynamically accessing free chunks of spectrum. Therefore, the main goal of the proposed approach is to improve spectral efficiency by efficiently using vacant gaps in congested spectrum bandwidths or adopting network densification through infrastructure sharing. We demonstrate mathematically how our proposed approach works and present several simulation results proving its functionality and efficiency. Additionally, we designed and implemented an open-source and free proof of concept prototype of the proposed architecture, which can be used by researchers and developers to run experiments or extend the concept to other applications. We present several experimental results used to validate the proposed prototype. We demonstrate that the prototype can easily handle up to 12 concurrent physical layers

Filtered OFDM systems, algorithms and performance analysis for 5G and beyond

Filtered orthogonal frequency division multiplexing (F-OFDM) system is a promising waveform for 5G and beyond to enable multi-service system and spectrum efficient network slicing. However, the performance for F-OFDM systems has not been systematically analyzed in literature. In this paper, we first establish a mathematical model for F-OFDM system and derive the conditions to achieve the interference-free one-tap channel equalization. In the practical cases (e.g., insufficient guard interval, asynchronous transmission, etc.), the analytical expressions for inter-symbol-interference (ISI), inter-carrier-interference (ICI) and adjacent-carrier-interference (ACI) are derived, where the last term is considered as one of the key factors for asynchronous transmissions. Based on the framework, an optimal power compensation matrix is derived to make all of the subcarriers having the same ergodic performance. Another key contribution of the paper is that we propose a multi-rate F-OFDM system to enable low complexity low cost communication scenarios such as narrow band Internet of Things (IoT), at the cost of generating inter-subband-interference (ISubBI). Low computational complexity algorithms are proposed to cancel the ISubBI. The result shows that the derived analytical expressions match the simulation results, and the proposed ISubBI cancelation algorithms can significantly save the original F-OFDM complexity (up to 100 times) without significant performance los

A survey on OFDM-based elastic core optical networking

Orthogonal frequency-division multiplexing (OFDM) is a modulation technology that has been widely adopted in many new and emerging broadband wireless and wireline communication systems. Due to its capability to transmit a high-speed data stream using multiple spectral-overlapped lower-speed subcarriers, OFDM technology offers superior advantages of high spectrum efficiency, robustness against inter-carrier and inter-symbol interference, adaptability to server channel conditions, etc. In recent years, there have been intensive studies on optical OFDM (O-OFDM) transmission technologies, and it is considered a promising technology for future ultra-high-speed optical transmission. Based on O-OFDM technology, a novel elastic optical network architecture with immense flexibility and scalability in spectrum allocation and data rate accommodation could be built to support diverse services and the rapid growth of Internet traffic in the future. In this paper, we present a comprehensive survey on OFDM-based elastic optical network technologies, including basic principles of OFDM, O-OFDM technologies, the architectures of OFDM-based elastic core optical networks, and related key enabling technologies. The main advantages and issues of OFDM-based elastic core optical networks that are under research are also discussed

Low-power Physical-layer Design for LTE Based Very NarrowBand IoT (VNB - IoT) Communication

abstract: With the new age Internet of Things (IoT) revolution, there is a need to connect a wide range of devices with varying throughput and performance requirements. In this thesis, a wireless system is proposed which is targeted towards very low power, delay insensitive IoT applications with low throughput requirements. The low cost receivers for such devices will have very low complexity, consume very less power and hence will run for several years. Long Term Evolution (LTE) is a standard developed and administered by 3rd Generation Partnership Project (3GPP) for high speed wireless communications for mobile devices. As a part of Release 13, another standard called narrowband IoT (NB-IoT) was introduced by 3GPP to serve the needs of IoT applications with low throughput requirements. Working along similar lines, this thesis proposes yet another LTE based solution called very narrowband IoT (VNB-IoT), which further reduces the complexity and power consumption of the user equipment (UE) while maintaining the base station (BS) architecture as defined in NB-IoT. In the downlink operation, the transmitter of the proposed system uses the NB-IoT resource block with each subcarrier modulated with data symbols intended for a different user. On the receiver side, each UE locks to a particular subcarrier frequency instead of the entire resource block and operates as a single carrier receiver. On the uplink, the system uses a single-tone transmission as specified in the NB-IoT standard. Performance of the proposed system is analyzed in an additive white Gaussian noise (AWGN) channel followed by an analysis of the inter carrier interference (ICI). Relationship between the overall filter bandwidth and ICI is established towards the end.Dissertation/ThesisMasters Thesis Electrical Engineering 201

Pilot Pouring in Superimposed Training for Channel Estimation in CB-FMT

Cyclic block filtered multi-tone (CB-FMT) is a waveform that can be efficiently synthesized through a filter-bank in the frequency domain. Although the main principles have been already established, channel estimation has not been addressed yet. This is because of assuming that the existing techniques based on pilot symbol assisted modulation (PSAM), implemented in OFDM-like schemes, can be reused. However, PSAM leads to an undesirable loss of data-rate. In this paper, an alternative method inspired by the superimposed training (ST) concept, namely pilot pouring ST (PPST), is proposed. In PPST, pilots are superimposed over data taking advantage of the particular spectral characteristics of CB-FMT. Exploiting the sub-channel spectrum, the pilot symbols are poured in those resources unused for data transmission. This spectral shaping of pilots is also exploited at the receiver to carry out channel estimation, by enhancing those channel estimates that exhibit a low data interference contribution. Furthermore, a frequency domain resource mapping strategy for the data and poured pilot symbols is proposed to enable an accurate estimation in strongly frequency-selective channels. The parameters of the proposed scheme are optimized to minimize the channel estimation mean squared error (MSE). Finally, several numerical results illustrate the performance advantages of the proposed technique as compared to other alternatives

PAPR Reduction Using Huffman and Arithmetic Coding Techniques in F-OFDM System

Filtered orthogonal frequency division multiplexing (F-OFDM) was introduced to overcome the high side lobes in the OFDM system. Filtering is implemented in the system to reduce the out-of-band emission (OOBE) for the spectrum utilization and to meet the diversified expectation of the upcoming 5G networks. The main drawback in the system is the high peak to average ratio (PAPR). This paper investigates the method used in reducing the PAPR in the F-OFDM system. The proposed method using the block coding technique to overcome the problem of high PAPR are the Arithmetic coding and Huffman coding. This research evaluates the performance of F-OFDM system based on the PAPR values. From the simulation results, the PAPR reduction of the Arithmetic coding is 8.9% lower, while the Huffman Coding is 6.7% lower in the F-OFDM system. The results prove that the Arithmetic Coding will out-perform the Huffman coding in the F-OFDM system

Interference analysis and power allocation in the presence of mixed numerologies

The flexibility in supporting heterogeneous services with vastly different technical requirements is one of the distinguishing characteristics of the fifth generation (5G) communication systems and beyond. One viable solution is to divide the system bandwidth into several bandwidth parts (BWPs), each having a distinct numerology optimized for a particular service. However, multiplexing of mixed numerologies over a unified physical infrastructure comes at the cost of induced interference. In this paper, we develop an analytical system model for inter-numerology interference (InterNI) analysis in orthogonal frequency-division multiplexing (OFDM) systems with and without filter processing in the presence of mixed numerologies. With the analytical model, the level of InterNI is quantified by the developed analytical metric, which is expressed as a function of several system parameters. This leads to an analysis and evaluation of these parameters for meeting a given distortion target. Moreover, a case study on power allocation utilizing the derived analysis is presented, where an optimization problem of maximizing the sum rate is formulated, and a solution is also provided. It is also demonstrated that a filtered-OFDM system better accommodates the coexistence of mixed numerologies. The proposed model provides an accurate analytical guidance for the multi-service design in 5G and beyond systems