Sistemas de posicionamento baseados em comunicação por luz para ambientes interiores

The demand for highly precise indoor positioning systems (IPSs) is growing rapidly due to its potential in the increasingly popular techniques of the Internet of Things, smart mobile devices, and artificial intelligence. IPS becomes a promising research domain that is getting wide attention due to its benefits in several working scenarios, such as, industries, indoor public locations, and autonomous navigation. Moreover, IPS has a prominent contribution in day-to-day activities in organizations such as health care centers, airports, shopping malls, manufacturing, underground locations, etc., for safe operating environments. In indoor environments, both radio frequency (RF) and optical wireless communication (OWC) based technologies could be adopted for localization. Although the RF-based global positioning system, such as, Global positioning system offers higher penetration rates with reduced accuracy (i.e., in the range of a few meters), it does not work well in indoor environments (and not at all in certain cases such as tunnels, mines, etc.) due to the very weak signal and no direct access to the satellites. On the other hand, the light-based system known as a visible light positioning (VLP) system, as part of the OWC systems, uses the pre-existing light-emitting diodes (LEDs)-based lighting infrastructure, could be used at low cost and high accuracy compared with the RF-based systems. VLP is an emerging technology promising high accuracy, high security, low deployment cost, shorter time response, and low relative complexity when compared with RFbased positioning. However, in indoor VLP systems, there are some concerns such as, multipath reflection, transmitter tilting, transmitter’s position, and orientation uncertainty, human shadowing/blocking, and noise causing the increase in the positioning error, thereby reducing the positioning accuracy of the system. Therefore, it is imperative to capture the characteristics of different VLP channel and properly model them for the dual purpose of illumination and localization. In this thesis, firstly, the impact of transmitter tilting angles and multipath reflections are studied and for the first time, it is demonstrated that tilting the transmitter can be beneficial in VLP systems considering both line of sight (LOS) and non-line of sight transmission paths. With the transmitters oriented towards the center of the receiving plane, the received power level is maximized due to the LOS components. It is also shown that the proposed scheme offers a significant accuracy improvement of up to ~66% compared with a typical non-tilted transmitter VLP. The effect of tilting the transmitter on the lighting uniformity is also investigated and results proved that the uniformity achieved complies with the European Standard EN 12464-1. After that, the impact of transmitter position and orientation uncertainty on the accuracy of the VLP system based on the received signal strength (RSS) is investigated. Simulation results show that the transmitter uncertainties have a severe impact on the positioning error, which can be leveraged through the usage of more transmitters. Concerning a smaller transmitter’s position epochs, and the size of the training set. It is shown that, the ANN with Bayesian regularization outperforms the traditional RSS technique using the non-linear least square estimation for all values of signal to noise ratio. Furthermore, a novel indoor VLP system is proposed based on support vector machines and polynomial regression considering two different multipath environments of an empty room and a furnished room. The results show that, in an empty room, the positioning accuracy improvement for the positioning error of 2.5 cm are 36.1, 58.3, and 72.2 % for three different scenarios according to the regions’ distribution in the room. For the furnished room, a positioning relative accuracy improvement of 214, 170, and 100 % is observed for positioning error of 0.1, 0.2, and 0.3 m, respectively. Ultimately, an indoor VLP system based on convolutional neural networks (CNN) is proposed and demonstrated experimentally in which LEDs are used as transmitters and a rolling shutter camera is used as receiver. A detection algorithm named single shot detector (SSD) is used which relies on CNN (i.e., MobileNet or ResNet) for classification as well as position estimation of each LED in the image. The system is validated using a real-world size test setup containing eight LED luminaries. The obtained results show that the maximum average root mean square positioning error achieved is 4.67 and 5.27 cm with SSD MobileNet and SSD ResNet models, respectively. The validation results show that the system can process 67 images per second, allowing real-time positioning.A procura por sistemas de posicionamento interior (IPSs) de alta precisão tem crescido rapidamente devido ao seu interesse nas técnicas cada vez mais populares da Internet das Coisas, dispositivos móveis inteligentes e inteligência artificial. O IPS tornou-se um domínio de pesquisa promissor que tem atraído grande atenção devido aos seus benefícios em vários cenários de trabalho, como indústrias, locais públicos e navegação autónoma. Além disso, o IPS tem uma contribuição destacada no dia a dia de organizações, como, centros de saúde, aeroportos, supermercados, fábricas, locais subterrâneos, etc. As tecnologias baseadas em radiofrequência (RF) e comunicação óptica sem fio (OWC) podem ser adotadas para localização em ambientes interiores. Embora o sistema de posicionamento global (GPS) baseado em RF ofereça taxas de penetração mais altas com precisão reduzida (ou seja, na faixa de alguns metros), não funciona bem em ambientes interiores (e não funciona bem em certos casos como túneis, minas, etc.) devido ao sinal muito fraco e falta de acesso direto aos satélites. Por outro lado, o sistema baseado em luz conhecido como sistema de posicionamento de luz visível (VLP), como parte dos sistemas OWC, usa a infraestrutura de iluminação baseada em díodos emissores de luz (LEDs) pré-existentes, é um sistemas de baixo custo e alta precisão quando comprado com os sistemas baseados em RF. O VLP é uma tecnologia emergente que promete alta precisão, alta segurança, baixo custo de implantação, menor tempo de resposta e baixa complexidade relativa quando comparado ao posicionamento baseado em RF. No entanto, os sistemas VLP interiores, exibem algumas limitações, como, a reflexão multicaminho, inclinação do transmissor, posição do transmissor e incerteza de orientação, sombra/bloqueio humano e ruído, que têm como consequência o aumento do erro de posicionamento, e consequente redução da precisão do sistema. Portanto, é imperativo estudar as características dos diferentes canais VLP e modelá-los adequadamente para o duplo propósito de iluminação e localização. Esta tesa aborda, primeiramente, o impacto dos ângulos de inclinação do transmissor e reflexões multipercurso no desempenho do sistema de posicionamento. Demonstra-se que a inclinação do transmissor pode ser benéfica em sistemas VLP considerando tanto a linha de vista (LOS) como as reflexões. Com os transmissores orientados para o centro do plano recetor, o nível de potência recebido é maximizado devido aos componentes LOS. Também é mostrado que o esquema proposto oferece uma melhoria significativa de precisão de até ~66% em comparação com um sistema VLP de transmissor não inclinado típico. O efeito da inclinação do transmissor na uniformidade da iluminação também é investigado e os resultados comprovam que a uniformidade alcançada está de acordo com a Norma Europeia EN 12464-1. O impacto da posição do transmissor e incerteza de orientação na precisão do sistema VLP com base na intensidade do sinal recebido (RSS) foi também investigado. Os resultados da simulação mostram que as incertezas do transmissor têm um impacto severo no erro de posicionamento, que pode ser atenuado com o uso de mais transmissores. Para incertezas de posicionamento dos transmissores menores que 5 cm, os erros médios de posicionamento são 23.3, 15.1 e 13.2 cm para conjuntos de 4, 9 e 16 transmissores, respetivamente. Enquanto que, para a incerteza de orientação de um transmissor menor de 5°, os erros médios de posicionamento são 31.9, 20.6 e 17 cm para conjuntos de 4, 9 e 16 transmissores, respetivamente. O trabalho da tese abordou a investigação dos aspetos de projeto de um sistema VLP indoor no qual uma rede neuronal artificial (ANN) é utilizada para estimativa de posicionamento considerando um canal multipercurso. O estudo considerou a influência do ruído como indicador de desempenho para a comparação entre diferentes abordagens de projeto. Três algoritmos de treino de ANNs diferentes foram considerados, a saber, Levenberg-Marquardt, regularização Bayesiana e algoritmos de gradiente conjugado escalonado, para minimizar o erro de posicionamento no sistema VLP. O projeto da ANN foi otimizado com base no número de neurónios nas camadas ocultas, no número de épocas de treino e no tamanho do conjunto de treino. Mostrou-se que, a ANN com regularização Bayesiana superou a técnica RSS tradicional usando a estimação não linear dos mínimos quadrados para todos os valores da relação sinal-ruído. Foi proposto um novo sistema VLP indoor baseado em máquinas de vetores de suporte (SVM) e regressão polinomial considerando dois ambientes interiores diferentes: uma sala vazia e uma sala mobiliada. Os resultados mostraram que, numa sala vazia, a melhoria da precisão de posicionamento para o erro de posicionamento de 2.5 cm são 36.1, 58.3 e 72.2% para três cenários diferentes de acordo com a distribuição das regiões na sala. Para a sala mobiliada, uma melhoria de precisão relativa de posicionamento de 214, 170 e 100% é observada para erro de posicionamento de 0.1, 0.2 e 0.3 m, respetivamente. Finalmente, foi proposto um sistema VLP indoor baseado em redes neurais convolucionais (CNN). O sistema foi demonstrado experimentalmente usando luminárias LED como transmissores e uma camara com obturador rotativo como recetor. O algoritmo de detecção usou um detector de disparo único (SSD) baseado numa CNN pré configurada (ou seja, MobileNet ou ResNet) para classificação. O sistema foi validado usando uma configuração de teste de tamanho real contendo oito luminárias LED. Os resultados obtidos mostraram que o erro de posicionamento quadrático médio alcançado é de 4.67 e 5.27 cm com os modelos SSD MobileNet e SSD ResNet, respetivamente. Os resultados da validação mostram que o sistema pode processar 67 imagens por segundo, permitindo o posicionamento em tempo real.Programa Doutoral em Engenharia Eletrotécnic

Wireless indoor localisation within the 5G internet of radio light

This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University LondonNumerous applications can be enhanced by accurate and efficient indoor localisation using wireless sensor networks, however trade-offs often exist between these two parameters. In this thesis, realworld and simulation data is used to examine the hybrid millimeter wave and Visible Light Communications (VLC) architecture of the 5G Internet of Radio Light (IoRL) Horizon 2020 project. Consequently, relevant localisation challenges within Visible Light Positioning (VLP) and asynchronous sampling networks are identified, and more accurate and efficient solutions are developed. Currently, VLP relies strongly on the assumed Lambertian properties of light sources. However, in practice, not all lights are Lambertian. To support the widespread deployment of VLC technology in numerous environments, measurements from non-Lambertian sources are analysed to provide new insights into the limitations of existing VLP techniques. Subsequently, a novel VLP calibration technique is proposed, and results indicate a 59% accuracy improvement against existing methods. This solution enables high accuracy centimetre level VLP to be achieved with non- Lambertian sources. Asynchronous sampling of range-based measurements is known to impact localisation performance negatively. Various Asynchronous Sampling Localisation Techniques (ASLT) exist to mitigate these effects. While effective at improving positioning performance, the exact suitability of such solutions is not evident due to their additional processes, subsequent complexity, and increased costs. As such, extensive simulations are conducted to study the effectiveness of ASLT under variable sampling latencies, sensor measurement noise, and target trajectories. Findings highlight the computational demand of existing ASLT and motivate the development of a novel solution. The proposed Kalman Extrapolated Least Squares (KELS) method achieves optimal localisation performance with a significant energy reduction of over 50% when compared to current leading ASLT. The work in this thesis demonstrates both the capability for high performance VLP from non- Lambertian sources as well as the potential for energy efficient localisation for sequentially sampled range measurements.Horizon 202

Optical wireless communication based indoor positioning algorithms: performance optimisation and mathematical modelling

In this paper, the performance of the optimal beam radius indoor positioning (OBRIP) and two-receiver indoor positioning (TRIP) algorithms are analysed by varying system parameters in the presence of an indoor optical wireless channel modelled in line of sight configuration. From all the conducted simulations, the minimum average error value obtained for TRIP is 0.61 m against 0.81 m obtained for OBRIP for room dimensions of 10 m × 10 m × 3 m. In addition, for each simulated condition, TRIP, which uses two receivers, outperforms OBRIP and reduces position estimation error up to 30%. To get a better understanding of error in position estimation for different combinations of beam radius and separation between light emitting diodes, the 90th percentile error is determined using a cumulative distribution frequency (CDF) plot, which gives an error value of 0.94 m for TRIP as compared to 1.20 m obtained for OBRIP. Both algorithms also prove to be robust towards change in receiver tilting angle, thus providing flexibility in the selection of the parameters to adapt to any indoor environment. In addition, in this paper, a mathematical model based on the concept of raw moments is used to confirm the findings of the simulation results for the proposed algorithms. Using this mathematical model, closed-form expressions are derived for standard deviation of uniformly distributed points in an optical wireless communication based indoor positioning system with circular and rectangular beam shapes

Visible Light Communication (VLC)

Visible light communication (VLC) using light-emitting diodes (LEDs) or laser diodes (LDs) has been envisioned as one of the key enabling technologies for 6G and Internet of Things (IoT) systems, owing to its appealing advantages, including abundant and unregulated spectrum resources, no electromagnetic interference (EMI) radiation and high security. However, despite its many advantages, VLC faces several technical challenges, such as the limited bandwidth and severe nonlinearity of opto-electronic devices, link blockage and user mobility. Therefore, significant efforts are needed from the global VLC community to develop VLC technology further. This Special Issue, “Visible Light Communication (VLC)”, provides an opportunity for global researchers to share their new ideas and cutting-edge techniques to address the above-mentioned challenges. The 16 papers published in this Special Issue represent the fascinating progress of VLC in various contexts, including general indoor and underwater scenarios, and the emerging application of machine learning/artificial intelligence (ML/AI) techniques in VLC

Software-Defined Lighting.

For much of the past century, indoor lighting has been based on incandescent or gas-discharge technology. But, with LED lighting experiencing a 20x/decade increase in flux density, 10x/decade decrease in cost, and linear improvements in luminous efficiency, solid-state lighting is finally cost-competitive with the status quo. As a result, LED lighting is projected to reach over 70% market penetration by 2030. This dissertation claims that solid-state lighting’s real potential has been barely explored, that now is the time to explore it, and that new lighting platforms and applications can drive lighting far beyond its roots as an illumination technology. Scaling laws make solid-state lighting competitive with conventional lighting, but two key features make solid-state lighting an enabler for many new applications: the high switching speeds possible using LEDs and the color palettes realizable with Red-Green-Blue-White (RGBW) multi-chip assemblies. For this dissertation, we have explored the post-illumination potential of LED lighting in applications as diverse as visible light communications, indoor positioning, smart dust time synchronization, and embedded device configuration, with an eventual eye toward supporting all of them using a shared lighting infrastructure under a unified system architecture that provides software-control over lighting. To explore the space of software-defined lighting (SDL), we design a compact, flexible, and networked SDL platform to allow researchers to rapidly test new ideas. Using this platform, we demonstrate the viability of several applications, including multi-luminaire synchronized communication to a photodiode receiver, communication to mobile phone cameras, and indoor positioning using unmodified mobile phones. We show that all these applications and many other potential applications can be simultaneously supported by a single lighting infrastructure under software control.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/111482/1/samkuo_1.pd

Visible Light and Camera-based Receiver Employing Machine Learning for Indoor Positioning Systems and Data Communications

Indoor location-based services have played a crucial role in the development of various Internet of Things applications over the last few decades. The use of radio frequency (RF)-based systems in indoor environments suffers from additional interference due to the high penetration rate and reflections of the RF, which may severely affect positioning accuracy. Alternatively, the optical technology using the existing light-emitting diode (LED)-based lights, photodetectors (PDs), and/or image sensors could be utilised to provide indoor positioning with high accuracy. Because of its resilience to electromagnetic interference, license-free operation, large bandwidth, and dual-use for illumination and communication, visible light positioning (VLP) systems have shown great potential in achieving high-precision indoor positioning. This thesis focus is on investigating VLP systems based on employing a single PD, or an array of PDs in the form of a single image sensor (i.e. a camera) for both localization and data communication. Following a comprehensive literature review on VLP, the key challenges in existing positioning methods for achieving a low-cost, accurate, and less complex indoor positioning systems design are highlighted by considering the design characteristics of an indoor environment, position accuracy, number of light-emitting LED, PD, and any additional sensors utilized. The thesis focuses on the major constraints of VLP and provides novel contributions. In most reported VLP schemes, the assumptions of fixed transmitter (Tx) angle and height may not be valid in many physical environments. In this work, the impact of tilting Tx and multipath reflections are investigated. The findings demonstrated that tilting Tx can be beneficial in VLP by leveraging the influence of reflections from both near- and far-walls. It also showed that proposed system offers a significant accuracy improvement by up to ~66% compared with a typical non-tilted Tx VLP system.Furthermore, increasing robustness of image sensor-based receiver (Rx) is a major challenge, which is being addressed using a novel angle of arrival-received signal intensity and a single LED. Experimental results show that the proposed algorithm can achieve a three-dimensional root mean squared error of 7.56 cm. Visible light communications employing a camera-based Rx is best known as optical camera communications (OCC), which can also be used for VLP. However, in OCC the transmission data rate is mainly limited by the exposure time and the frame rate of the camera. In addition, the camera's sampling introduces intersymbol interference Indoor location-based services have played a crucial role in the development of various Internet of Things applications over the last few decades. The use of radio frequency (RF)-based systems in indoor environments suffers from additional interference due to the high penetration rate and reflections of the RF, which may severely affect positioning accuracy. Alternatively, the optical technology using the existing light-emitting diode (LED)-based lights, photodetectors (PDs), and/or image sensors could be utilised to provide indoor positioning with high accuracy. Because of its resilience to electromagnetic interference, license-free operation, large bandwidth, and dual-use for illumination and communication, visible light positioning (VLP) systems have shown great potential in achieving high-precision indoor positioning. This thesis focus is on investigating VLP systems based on employing a single PD, or an array of PDs in the form of a single image sensor (i.e. a camera) for both localization and data communication. Following a comprehensive literature review on VLP, the key challenges in existing positioning methods for achieving a low-cost, accurate, and less complex indoor positioning systems design are highlighted by considering the design characteristics of an indoor environment, position accuracy, number of light-emitting LED, PD, and any additional sensors utilized. The thesis focuses on the major constraints of VLP and provides novel contributions. In most reported VLP schemes, the assumptions of fixed transmitter (Tx) angle and height may not be valid in many physical environments. In this work, the impact of tilting Tx and multipath reflections are investigated. The findings demonstrated that tilting Tx can be beneficial in VLP by leveraging the influence of reflections from both near- and far-walls. It also showed that proposed system offers a significant accuracy improvement by up to ~66% compared with a typical non-tilted Tx VLP system.Furthermore, increasing robustness of image sensor-based receiver (Rx) is a major challenge, which is being addressed using a novel angle of arrival-received signal intensity and a single LED. Experimental results show that the proposed algorithm can achieve a three-dimensional root mean squared error of 7.56 cm. Visible light communications employing a camera-based Rx is best known as optical camera communications (OCC), which can also be used for VLP. However, in OCC the transmission data rate is mainly limited by the exposure time and the frame rate of the camera. In addition, the camera's sampling introduces intersymbol interference