Optimization Tools for ConvNets on the Edge

L'abstract è presente nell'allegato / the abstract is in the attachmen

Understanding the thermal implications of multicore architectures

Multicore architectures are becoming the main design paradigm for current and future processors. The main reason is that multicore designs provide an effective way of overcoming instruction-level parallelism (ILP) limitations by exploiting thread-level parallelism (TLP). In addition, it is a power and complexity-effective way of taking advantage of the huge number of transistors that can be integrated on a chip. On the other hand, today's higher than ever power densities have made temperature one of the main limitations of microprocessor evolution. Thermal management in multicore architectures is a fairly new area. Some works have addressed dynamic thermal management in bi/quad-core architectures. This work provides insight and explores different alternatives for thermal management in multicore architectures with 16 cores. Schemes employing both energy reduction and activity migration are explored and improvements for thread migration schemes are proposed.Peer ReviewedPostprint (published version

DVFS using clock scheduling for Multicore Systems-on-Chip and Networks-on-Chip

A modern System-on-Chip (SoC) contains processor cores, application-specific process- ing elements, memory, peripherals, all connected with a high-bandwidth and low-latency Network-on-Chip (NoC). The downside of such very high level of integration and con- nectivity is the high power consumption. In CMOS technology this is made of a dynamic and a static component. To reduce the dynamic component, Dynamic voltage and Fre- quency Scaling (DVFS) has been adopted. Although DVFS is very effective chip-wide, the power optimization of complex SoCs calls for a finer grain application of DVFS. Ideally all the main components of an SoC should be provided with a DVFS controller. An SoC with a DVFS controller per component with individual DC-DC converters and PLL/DLL circuits cannot scale in size to hundreds of components, which are in the research agenda. We present an alternative that will permit such scaling. It is possible to achieve results close to an optimum DVFS by hopping between few voltage levels and by an innovative application of clock-gating that we term as clock scheduling. We obtain an effective clock frequency by periodically killing some clock cycles of a master clock. We can apply voltage scaling for some of the periodic clock schedules which yield effective clock 1/2, 1/3, . . . By dithering between few voltages we obtain results close to an ideal DVFS system in simple pipelined circuits and in a complex example, a NoC’s switch. Again in the context of a NoC, we show how clock scheduling and voltage scaling can be automatically determined by means of a proportional-integral loop controller that keeps track of the network load. We describe in detail its implementation and all the circuit-level issues that we found. For a single switch, result shows an advantage of up to 2X over simple frequency scaling without voltage scaling. By providing each NoC’s switch with our simple DVFS controller, power saving at network level can be significantly more than what a a global DVFS controller can get. In a realistic scenario represented by network traces generated by video applications (MPEG, PIP, MWD, VoPD), we obtain an average power saving of 33%. To reduce static power, the Power-Gating (PG) technique is used and consists in switching- off power supply of unused blocks via pMOS headers or nMOS footers in series with such blocks. Even though research has been done in this field, the application of PG to NoCs has not been fully investigated. We show that it is possible to apply PG to the input buffers of a NoC switch. Their leakage power contributes about 40-50% of total NoC power, hence reducing such contribution is worthwhile. We partitioned buffers in banks and apply PG only to inactive banks. With our technique, it is possible to save about 40% in leakage power, without impact on performance

A Survey on Low-Power Techniques with Emerging Technologies: From Devices to Systems

Nowadays, power consumption is one of the main limitations of electronic systems. In this context, novel and emerging devices provide us with new opportunities to keep the trend to low-power design. In this survey paper, we present a transversal survey on energy efficient techniques ranging from devices to architectures. The actual trends of device research, with fully-depleted planar devices, tri-gate geometries and gate-all-around structures, allows us to reach an increasingly higher level of performance while reducing the associated power. In addition, beyond the simple device properties enhancements, emerging devices also lead to innovations at circuit and architectural levels. In particular, devices whose properties can be tuned through additional terminals enable a fine and dynamic control of device threshold. They also enable designers to realize logic gates and to implement power-related techniques in a compact way unreachable to standard technologies. These innovations reduce the power consumption at the gate level and unlock new means of actuation in architectural solutions like adaptive voltage and frequency scaling

Cross-Layer Approaches for an Aging-Aware Design of Nanoscale Microprocessors

Thanks to aggressive scaling of transistor dimensions, computers have revolutionized our life. However, the increasing unreliability of devices fabricated in nanoscale technologies emerged as a major threat for the future success of computers. In particular, accelerated transistor aging is of great importance, as it reduces the lifetime of digital systems. This thesis addresses this challenge by proposing new methods to model, analyze and mitigate aging at microarchitecture-level and above

FDSOI Design using Automated Standard-Cell-Grained Body Biasing

With the introduction of FDSOI processes at competitive technology nodes, body biasing on an unprecedented scale was made possible. Body biasing influences one of the central transistor characteristics, the threshold voltage. By being able to heighten or lower threshold voltage by more than 100mV, the very physics of transistor switching can be manipulated at run time. Furthermore, as body biasing does not lead to different signal levels, it can be applied much more fine-grained than, e.g., DVFS. With the state of the art mainly focused on combinations of body biasing with DVFS, it has thus ignored granularities unfeasible for DVFS. This thesis fills this gap by proposing body bias domain partitioning techniques and for body bias domain partitionings thereby generated, algorithms that search for body bias assignments. Several different granularities ranging from entire cores to small groups of standard cells were examined using two principal approaches: Designer aided pre-partitioning based determination of body bias domains and a first-time, fully automatized, netlist based approach called domain candidate exploration. Both approaches operate along the lines of activation and timing of standard cell groups. These approaches were evaluated using the example of a Dynamically Reconfigurable Processor (DRP), a highly efficient category of reconfigurable architectures which consists of an array of processing elements and thus offers many opportunities for generalization towards many-core architectures. Finally, the proposed methods were validated by manufacturing a test-chip. Extensive simulation runs as well as the test-chip evaluation showed the validity of the proposed methods and indicated substantial improvements in energy efficiency compared to the state of the art. These improvements were accomplished by the fine-grained partitioning of the DRP design. This method allowed reducing dynamic power through supply voltage levels yielding higher clock frequencies using forward body biasing, while simultaneously reducing static power consumption in unused parts.Die Einführung von FDSOI Prozessen in gegenwärtigen Prozessgrößen ermöglichte die Nutzung von Substratvorspannung in nie zuvor dagewesenem Umfang. Substratvorspannung beeinflusst unter anderem eine zentrale Eigenschaft von Transistoren, die Schwellspannung. Mittels Substratvorspannung kann diese um mehr als 100mV erhöht oder gesenkt werden, was es ermöglicht, die schiere Physik des Schaltvorgangs zu manipulieren. Da weiterhin hiervon der Signalpegel der digitalen Signale unberührt bleibt, kann diese Technik auch in feineren Granularitäten angewendet werden, als z.B. Dynamische Spannungs- und Frequenz Anpassung (Engl. Dynamic Voltage and Frequency Scaling, Abk. DVFS). Da jedoch der Stand der Technik Substratvorspannung hauptsächlich in Kombinationen mit DVFS anwendet, werden feinere Granularitäten, welche für DVFS nicht mehr wirtschaftlich realisierbar sind, nicht berücksichtigt. Die vorliegende Arbeit schließt diese Lücke, indem sie Partitionierungsalgorithmen zur Unterteilung eines Entwurfs in Substratvorspannungsdomänen vorschlägt und für diese hierdurch unterteilten Domänen entsprechende Substratvorspannungen berechnet. Hierzu wurden verschiedene Granularitäten berücksichtigt, von ganzen Prozessorkernen bis hin zu kleinen Gruppen von Standardzellen. Diese Entwürfe wurden dann mit zwei verschiedenen Herangehensweisen unterteilt: Chipdesigner unterstützte, vorpartitionierungsbasierte Bestimmung von Substratvorspannungsdomänen, sowie ein erstmals vollautomatisierter, Netzlisten basierter Ansatz, in dieser Arbeit Domänen Kandidaten Exploration genannt. Beide Ansätze funktionieren nach dem Prinzip der Aktivierung, d.h. zu welchem Zeitpunkt welcher Teil des Entwurfs aktiv ist, sowie der Signallaufzeit durch die entsprechenden Entwurfsteile. Diese Ansätze wurden anhand des Beispiels Dynamisch Rekonfigurierbarer Prozessoren (DRP) evaluiert. DRPs stellen eine Klasse hocheffizienter rekonfigurierbarer Architekturen dar, welche hauptsächlich aus einem Feld von Rechenelementen besteht und dadurch auch zahlreiche Möglichkeiten zur Verallgemeinerung hinsichtlich Many-Core Architekturen zulässt. Schließlich wurden die vorgeschlagenen Methoden in einem Testchip validiert. Alle ermittelten Ergebnisse zeigen im Vergleich zum Stand der Technik drastische Verbesserungen der Energieeffizienz, welche durch die feingranulare Unterteilung in Substratvorspannungsdomänen erzielt wurde. Hierdurch konnten durch die Anwendung von Substratvorspannung höhere Taktfrequenzen bei gleicher Versorgungsspannung erzielt werden, während zeitgleich in zeitlich unkritischen oder ungenutzten Entwurfsteilen die statische Leistungsaufnahme minimiert wurde

Energy Management via PI Control for Data Parallel Applications with Throughput Constraints

International audienceThis paper presents a new proportional-integral (PI) controller that sets the operating point of computing tiles in a system on chip (SoC). We address data-parallel applications with throughput constraints. The controller settings are investigated for application configurations with different QoS levels and different buffer sizes. The control method is evaluated on a test chip with four tiles executing a realistic HMAX object recognition application. Experimental results suggest that the proposed controller outperforms the state-of-the-art results: it attains, on average, 25% less number of frequency switches and has slightly higher energy savings. The reduction in number of frequency switches is important because it decreases the involved overhead. In addition, the PI controller meets the throughput constraint in cases where other approaches fail

Cross-Layer Optimization for Power-Efficient and Robust Digital Circuits and Systems

With the increasing digital services demand, performance and power-efficiency become vital requirements for digital circuits and systems. However, the enabling CMOS technology scaling has been facing significant challenges of device uncertainties, such as process, voltage, and temperature variations. To ensure system reliability, worst-case corner assumptions are usually made in each design level. However, the over-pessimistic worst-case margin leads to unnecessary power waste and performance loss as high as 2.2x. Since optimizations are traditionally confined to each specific level, those safe margins can hardly be properly exploited. To tackle the challenge, it is therefore advised in this Ph.D. thesis to perform a cross-layer optimization for digital signal processing circuits and systems, to achieve a global balance of power consumption and output quality. To conclude, the traditional over-pessimistic worst-case approach leads to huge power waste. In contrast, the adaptive voltage scaling approach saves power (25% for the CORDIC application) by providing a just-needed supply voltage. The power saving is maximized (46% for CORDIC) when a more aggressive voltage over-scaling scheme is applied. These sparsely occurred circuit errors produced by aggressive voltage over-scaling are mitigated by higher level error resilient designs. For functions like FFT and CORDIC, smart error mitigation schemes were proposed to enhance reliability (soft-errors and timing-errors, respectively). Applications like Massive MIMO systems are robust against lower level errors, thanks to the intrinsically redundant antennas. This property makes it applicable to embrace digital hardware that trades quality for power savings.Comment: 190 page