Feedback Control Goes Wireless: Guaranteed Stability over Low-power Multi-hop Networks

Closing feedback loops fast and over long distances is key to emerging applications; for example, robot motion control and swarm coordination require update intervals of tens of milliseconds. Low-power wireless technology is preferred for its low cost, small form factor, and flexibility, especially if the devices support multi-hop communication. So far, however, feedback control over wireless multi-hop networks has only been shown for update intervals on the order of seconds. This paper presents a wireless embedded system that tames imperfections impairing control performance (e.g., jitter and message loss), and a control design that exploits the essential properties of this system to provably guarantee closed-loop stability for physical processes with linear time-invariant dynamics. Using experiments on a cyber-physical testbed with 20 wireless nodes and multiple cart-pole systems, we are the first to demonstrate and evaluate feedback control and coordination over wireless multi-hop networks for update intervals of 20 to 50 milliseconds.Comment: Accepted final version to appear in: 10th ACM/IEEE International Conference on Cyber-Physical Systems (with CPS-IoT Week 2019) (ICCPS '19), April 16--18, 2019, Montreal, QC, Canad

Integrating security in a group oriented distributed system

A distributed security architecture is proposed for incorporation into group oriented distributed systems, and in particular, into the Isis distributed programming toolkit. The primary goal of the architecture is to make common group oriented abstractions robust in hostile settings, in order to facilitate the construction of high performance distributed applications that can tolerate both component failures and malicious attacks. These abstractions include process groups and causal group multicast. Moreover, a delegation and access control scheme is proposed for use in group oriented systems. The focus is the security architecture; particular cryptosystems and key exchange protocols are not emphasized

Reliability Mechanisms for Controllers in Real-Time Cyber-Physical Systems

Cyber-physical systems (CPSs) are real-world processes that are controlled by computer algorithms. We consider CPSs where a centralized, software-based controller maintains the process in a desired state by exchanging measurements and setpoints with process agents (PAs). As CPSs control processes with low-inertia, e.g., electric grids and autonomous cars, the controller needs to satisfy stringent real-time constraints. However, the controllers are susceptible to delay and crash faults, and the communication network might drop, delay or reorder messages. This degrades the quality of control of the physical process, failure of which can result in damage to life or property. Existing reliability solutions are either not well-suited for real-time CPSs or impose serious restrictions on the controllers. In this thesis, we design, implement and evaluate reliability mechanisms for real-time CPS controllers that require minimal modifications to the controller itself. We begin by abstracting the execution of a CPS using events in the CPS, and the two inherent relations among those events, namely network and computation relations. We use these relations to introduce the intentionality relation that uses these events to capture the state of the physical process. Based on the intentionality relation, we define three correctness properties namely, state safety, optimal selection and consistency, that together provide linearizability (one-copy equivalence) for CPS controllers. We propose intentionality clocks and Quarts, and prove that they provide linearizability. To provide consistency, Quarts ensures agreement among controller replicas, which is typically achieved using consensus. Consensus can add an unbounded-latency overhead. Quarts leverages the properties specific to CPSs to perform agreement using pre-computed priorities among sets of received measurements, resulting in a bounded-latency overhead with high availability. Using simulation, we show that availability of Quarts, with two replicas, is more than an order of magnitude higher than consensus. We also propose Axo, a fault-tolerance protocol that uses active replication to detect and recover faulty replicas, and provide timeliness that requires delayed setpoints be masked from the PAs. We study the effect of delay faults and the impact of fault-tolerance with Axo, by deploying Axo in two real-world CPSs. Then, we realize that the proposed reliability mechanisms also apply to unconventional CPSs such as software defined networking (SDN), where the controlled process is the routing fabric of the network. We show that, in SDN, violating consistency can cause implementation of incorrect routing policies. Thus, we use Quarts and intentionality clocks, to design and implement QCL, a coordination layer for SDN controllers that guarantees control-plane consistency. QCL also drastically reduces the response time of SDN controllers when compared to consensus-based techniques. In the last part of the thesis, we address the problem of reliable communication between the software agents, in a wide-area network that can drop, delay or reorder messages. For this, we propose iPRP, an IP-friendly parallel redundancy protocol for 0 ms repair of packet losses. iPRP requires fail-independent paths for high-reliability. So, we study the fail-independence of Wi-Fi links using real-life measurements, as a first step towards using Wi-Fi for real-time communication in CPSs

Swing-Up and Stabilization of the Double Furuta Pendulum

The problem of stabilization of an inverted pendulum is a common experiment in controls laboratories. The objective of the experiment is to balance a bar upright by providing appropriate motion to its base, similar to balancing a tennis racket upright on the palm of a human hand. The problem can be made more challenging by trying to balance two serially-joined bars instead of one. In this thesis, such a problem is considered. A mathematical model of the system is developed, and ideas of swing-up and stabilization of the two serial bars (mechanical links) are explored. A prototype is developed for validating the control system, and the details of the hardware design are discussed

Control Theory in Engineering

The subject matter of this book ranges from new control design methods to control theory applications in electrical and mechanical engineering and computers. The book covers certain aspects of control theory, including new methodologies, techniques, and applications. It promotes control theory in practical applications of these engineering domains and shows the way to disseminate researchers’ contributions in the field. This project presents applications that improve the properties and performance of control systems in analysis and design using a higher technical level of scientific attainment. The authors have included worked examples and case studies resulting from their research in the field. Readers will benefit from new solutions and answers to questions related to the emerging realm of control theory in engineering applications and its implementation