On the Performance Gain of NOMA over OMA in Uplink Communication Systems

In this paper, we investigate and reveal the ergodic sum-rate gain (ESG) of non-orthogonal multiple access (NOMA) over orthogonal multiple access (OMA) in uplink cellular communication systems. A base station equipped with a single-antenna, with multiple antennas, and with massive antenna arrays is considered both in single-cell and multi-cell deployments. In particular, in single-antenna systems, we identify two types of gains brought about by NOMA: 1) a large-scale near-far gain arising from the distance discrepancy between the base station and users; 2) a small-scale fading gain originating from the multipath channel fading. Furthermore, we reveal that the large-scale near-far gain increases with the normalized cell size, while the small-scale fading gain is a constant, given by $\gamma$ = 0.57721 nat/s/Hz, in Rayleigh fading channels. When extending single-antenna NOMA to $M$-antenna NOMA, we prove that both the large-scale near-far gain and small-scale fading gain achieved by single-antenna NOMA can be increased by a factor of $M$ for a large number of users. Moreover, given a massive antenna array at the base station and considering a fixed ratio between the number of antennas, $M$, and the number of users, $K$, the ESG of NOMA over OMA increases linearly with both $M$ and $K$. We then further extend the analysis to a multi-cell scenario. Compared to the single-cell case, the ESG in multi-cell systems degrades as NOMA faces more severe inter-cell interference due to the non-orthogonal transmissions. Besides, we unveil that a large cell size is always beneficial to the ergodic sum-rate performance of NOMA in both single-cell and multi-cell systems. Numerical results verify the accuracy of the analytical results derived and confirm the insights revealed about the ESG of NOMA over OMA in different scenarios.Comment: 51 pages, 7 figures, invited paper, submitted to IEEE Transactions on Communication

Performance of SC-FDMA with diversity techniques over land mobile satellite channel

La demanda de la alta velocidad de datos resulta en una importante interferencia entre símbolos para los sistemas monoportadora en canales de ancho de banda y potencia limitada. Superar la selectividad en el tiempo y la frecuencia del canal de propagación requiere el uso de potentes técnicas de procesamiento de señales. Ejemplos recientes incluyen el uso de múltiples antenas en el transmisor / receptor, en la técnica conocida como Multiple-Input Multiple-Output (MIMO). En ciertos entornos (tales como el enlace ascendente de un enlace móvil) por lo general sólo una antena está disponible en la transmisión. Por lo tanto, sólo esquemas con entrada individual y salida única (Single Input Single Output, SISO) o transmisiones con entrada única y múltiples salidas (Single Input Multiple Output, SIMO) son factibles. La multiplexación por división ortogonal en frecuencia (Orthogonal Frequency-Division Multiplexing, OFDM) es una técnica de modulación ampliamente utilizada por su robustez frente a la selectividad en frecuencia de los canales, su escalabilidad y su compatibilidad con MIMO. Sin embargo, sufre de una alta relación de potencia de pico a promedio (Peak-to-Average Power Ratio, PAPR) que necesita amplificadores de alta potencia muy lineales, lo que resulta costoso energéticamente para la transmisión. La técnica monoportadora con acceso múltiple por división de frecuencia (Single Carrier Frequency-Division Multiple Access , SC-FDMA) se ha convertido en una alternativa a la técnica de OFDM que se utiliza específicamente en el enlace ascendente de LTE. SC-FDMA es capaz de reducir la PAPR en la transmisión, dando lugar a una relajación de las limitaciones en cuanto a la eficiencia de potencia necesaria en los terminales de usuario y las unidades satélite. SC-FDMA puede ser descrito como una versión de OFDMA en el que se incluyen una etapa de pre-codificación y de pre-codificación inversa en el transmisor y el receptor respectivamente. Así, los símbolos se transmiten en tiempo, pero después de ser procesados en la frecuencia. Incluso con el uso de OFDMA o SC-FDMA, la ISI tiene que ser compensada por la igualación, que normalmente se realiza en el dominio de frecuencia. El objetivo de esta tesis es proporcionar un análisis matemático del comportamiento de SC-FDMA en un canal móvil terrestre por satélite (Land Mobile Satellite, LMS). Para este propósito, el canal se modela como un canal Rice sombreado tal que la línea de visión (Line of Sight, LOS) sigue la distribución de Nakagami. En primer lugar, se describen las técnicas de modulación multiportadora OFDMA y SC-FDMA. A continuación, se lleva a cabo un análisis de OFDMA y SC-FDMA basado en el ruido complejo recibido a la entrada del detector. Se evalúa la probabilidad de error de bit (Bit Error Rate, BER) de SC-FDMA para diferentes profundidades del desvanecimiento y de la diversidad de antena en el receptor. También se evalúa la eficiencia espectral de SC-FDMA para el canal LMS. Por último, se abordan las técnicas de diversidad y se evalúan las técnicas conocidas como Maximal Ratio Combining (MRC) y Equal Gain Combining (EGC)

On-board processing for future satellite communications systems: Satellite-Routed FDMA

A frequency division multiple access (FDMA) 30/20 GHz satellite communications architecture without on-board baseband processing is investigated. Conceptual system designs are suggested for domestic traffic models totaling 4 Gb/s of customer premises service (CPS) traffic and 6 Gb/s of trunking traffic. Emphasis is given to the CPS portion of the system which includes thousands of earth terminals with digital traffic ranging from a single 64 kb/s voice channel to hundreds of channels of voice, data, and video with an aggregate data rate of 33 Mb/s. A unique regional design concept that effectively smooths the non-uniform traffic distribution and greatly simplifies the satellite design is employed. The satellite antenna system forms thirty-two 0.33 deg beam on both the uplinks and the downlinks in one design. In another design matched to a traffic model with more dispersed users, there are twenty-four 0.33 deg beams and twenty-one 0.7 deg beams. Detailed system design techniques show that a single satellite producing approximately 5 kW of dc power is capable of handling at least 75% of the postulated traffic. A detailed cost model of the ground segment and estimated system costs based on current information from manufacturers are presented

Concepts for 18/30 GHz satellite communication system, volume 1

Concepts for 18/30 GHz satellite communication systems are presented. Major terminal trunking as well as direct-to-user configurations were evaluated. Critical technologies in support of millimeter wave satellite communications were determined

Spectrally Efficient Waveforms for the Return Link in Satellite Communication Systems

In this paper, we study the applicability of terrestrial mobile waveforms in the return link of a high throughput satellite (HTS) communication system. These include orthogonal frequency division multiple access (OFDMA), single-carrier frequency division multiple access (SC-FDMA) and filter bank multi-carrier (FBMC). Key solutions to the challenges in a geostationary orbit (GEO) satellite channel, such as synchronization and non-linear distortion, are presented. A global-positioning-system-(GPS)-based approach for synchronization acquisition is proposed, while suitable algorithms are studied for timing/frequency offset estimation and synchronization tracking. The spectral and power efficiencies of the schemes are optimized by means of an intermodulation interference (IMI) cancelling receiver, and these are compared to state-of-the-art time division multiple access (TDMA). Finally, end-to-end simulations validate the system performance

Analyzing the Reduced Required BS Density due to CoMP in Cellular Networks

In this paper we investigate the benefit of base station (BS) cooperation in the uplink of coordinated multi-point (CoMP) networks. Our figure of merit is the required BS density required to meet a chosen rate coverage. Our model assumes a 2-D network of BSs on a regular hexagonal lattice in which path loss, lognormal shadowing and Rayleigh fading affect the signal received from users. Accurate closed-form expressions are first presented for the sum-rate coverage probability and ergodic sum-rate at each point of the cooperation region. Then, for a chosen quality of user rate, the required density of BS is derived based on the minimum value of rate coverage probability in the cooperation region. The approach guarantees that the achievable rate in the entire coverage region is above a target rate with chosen probability. The formulation allows comparison between different orders of BS cooperation, quantifying the reduced required BS density from higher orders of cooperation.Comment: Accepted for presentation in IEEE Globecom Conf., to be held in Atlanta, USA, Dec. 2013. arXiv admin note: text overlap with arXiv:1302.159