818 research outputs found
Energy management in communication networks: a journey through modelling and optimization glasses
The widespread proliferation of Internet and wireless applications has
produced a significant increase of ICT energy footprint. As a response, in the
last five years, significant efforts have been undertaken to include
energy-awareness into network management. Several green networking frameworks
have been proposed by carefully managing the network routing and the power
state of network devices.
Even though approaches proposed differ based on network technologies and
sleep modes of nodes and interfaces, they all aim at tailoring the active
network resources to the varying traffic needs in order to minimize energy
consumption. From a modeling point of view, this has several commonalities with
classical network design and routing problems, even if with different
objectives and in a dynamic context.
With most researchers focused on addressing the complex and crucial
technological aspects of green networking schemes, there has been so far little
attention on understanding the modeling similarities and differences of
proposed solutions. This paper fills the gap surveying the literature with
optimization modeling glasses, following a tutorial approach that guides
through the different components of the models with a unified symbolism. A
detailed classification of the previous work based on the modeling issues
included is also proposed
A Survey on the Contributions of Software-Defined Networking to Traffic Engineering
Since the appearance of OpenFlow back in 2008, software-defined networking (SDN) has gained momentum. Although there are some discrepancies between the standards developing organizations working with SDN about what SDN is and how it is defined, they all outline traffic engineering (TE) as a key application. One of the most common objectives of TE is the congestion minimization, where techniques such as traffic splitting among multiple paths or advanced reservation systems are used. In such a scenario, this manuscript surveys the role of a comprehensive list of SDN protocols in TE solutions, in order to assess how these protocols can benefit TE. The SDN protocols have been categorized using the SDN architecture proposed by the open networking foundation, which differentiates among data-controller plane interfaces, application-controller plane interfaces, and management interfaces, in order to state how the interface type in which they operate influences TE. In addition, the impact of the SDN protocols on TE has been evaluated by comparing them with the path computation element (PCE)-based architecture. The PCE-based architecture has been selected to measure the impact of SDN on TE because it is the most novel TE architecture until the date, and because it already defines a set of metrics to measure the performance of TE solutions. We conclude that using the three types of interfaces simultaneously will result in more powerful and enhanced TE solutions, since they benefit TE in complementary ways.European Commission through the Horizon 2020 Research and Innovation Programme (GN4) under Grant 691567
Spanish Ministry of Economy and Competitiveness under the Secure Deployment of Services Over SDN and NFV-based Networks Project S&NSEC under Grant TEC2013-47960-C4-3-
Segment Routing: a Comprehensive Survey of Research Activities, Standardization Efforts and Implementation Results
Fixed and mobile telecom operators, enterprise network operators and cloud
providers strive to face the challenging demands coming from the evolution of
IP networks (e.g. huge bandwidth requirements, integration of billions of
devices and millions of services in the cloud). Proposed in the early 2010s,
Segment Routing (SR) architecture helps face these challenging demands, and it
is currently being adopted and deployed. SR architecture is based on the
concept of source routing and has interesting scalability properties, as it
dramatically reduces the amount of state information to be configured in the
core nodes to support complex services. SR architecture was first implemented
with the MPLS dataplane and then, quite recently, with the IPv6 dataplane
(SRv6). IPv6 SR architecture (SRv6) has been extended from the simple steering
of packets across nodes to a general network programming approach, making it
very suitable for use cases such as Service Function Chaining and Network
Function Virtualization. In this paper we present a tutorial and a
comprehensive survey on SR technology, analyzing standardization efforts,
patents, research activities and implementation results. We start with an
introduction on the motivations for Segment Routing and an overview of its
evolution and standardization. Then, we provide a tutorial on Segment Routing
technology, with a focus on the novel SRv6 solution. We discuss the
standardization efforts and the patents providing details on the most important
documents and mentioning other ongoing activities. We then thoroughly analyze
research activities according to a taxonomy. We have identified 8 main
categories during our analysis of the current state of play: Monitoring,
Traffic Engineering, Failure Recovery, Centrally Controlled Architectures, Path
Encoding, Network Programming, Performance Evaluation and Miscellaneous...Comment: SUBMITTED TO IEEE COMMUNICATIONS SURVEYS & TUTORIAL
Advancing the Standards for Unmanned Air System Communications, Navigation and Surveillance
Under NASA program NNA16BD84C, new architectures were identified and developed for supporting reliable and secure Communications, Navigation and Surveillance (CNS) needs for Unmanned Air Systems (UAS) operating in both controlled and uncontrolled airspace. An analysis of architectures for the two categories of airspace and an implementation technology readiness analysis were performed. These studies produced NASA reports that have been made available in the public domain and have been briefed in previous conferences. We now consider how the products of the study are influencing emerging directions in the aviation standards communities. The International Civil Aviation Organization (ICAO) Communications Panel (CP), Working Group I (WG-I) is currently developing a communications network architecture known as the Aeronautical Telecommunications Network with Internet Protocol Services (ATN/IPS). The target use case for this service is secure and reliable Air Traffic Management (ATM) for manned aircraft operating in controlled airspace. However, the work is more and more also considering the emerging class of airspace users known as Remotely Piloted Aircraft Systems (RPAS), which refers to certain UAS classes. In addition, two Special Committees (SCs) in the Radio Technical Commission for Aeronautics (RTCA) are developing Minimum Aviation System Performance Standards (MASPS) and Minimum Operational Performance Standards (MOPS) for UAS. RTCA SC-223 is investigating an Internet Protocol Suite (IPS) and AeroMACS aviation data link for interoperable (INTEROP) UAS communications. Meanwhile, RTCA SC-228 is working to develop Detect And Avoid (DAA) equipment and a Command and Control (C2) Data Link MOPS establishing LBand and C-Band solutions. These RTCA Special Committees along with ICAO CP WG/I are therefore overlapping in terms of the Communication, Navigation and Surveillance (CNS) alternatives they are seeking to provide for an integrated manned- and unmanned air traffic management service as well as remote pilot command and control. This paper presents UAS CNS architecture concepts developed under the NASA program that apply to all three of the aforementioned committees. It discusses the similarities and differences in the problem spaces under consideration in each committee, and considers the application of a common set of CNS alternatives that can be widely applied. As the works of these committees progress, it is clear that the overlap will need to be addressed to ensure a consistent and safe framework for worldwide aviation. In this study, we discuss similarities and differences in the various operational models and show how the CNS architectures developed under the NASA program apply
Optimizing IGP Link Costs for Improving IP-level Resilience
Recently, major vendors have introduced new router
platforms to the market that support fast IP-level failure pro-
tection out of the box. The implementations are based on the
IP Fast ReRoute–Loop Free Alternates (LFA) standard. LFA
is simple, unobtrusive, and easily deployable. This simplicity,
however, comes at a severe price, in that LFA usually cannot
protect all possible failure scenarios. In this paper, we give new
graph theoretical tools for analyzing LFA failure case coverage
and we seek ways for improvement. In particular, we investigate
how to optimize IGP link costs to maximize the number of
protected failure scenarios, we show that this problem is NP-
complete even in a very restricted formulation, and we give exact
and approximate algorithms to solve it. Our simulation studies
show that a deliberate selection of IGP costs can bring many
networks close to complete LFA-based protection
Network Routing Using the Network Tasking Order, a Chron Approach
This thesis promotes the use of the network tasking order (NTO), in collaboration with the air tasking order (ATO), to optimize routing in Mobile Ad hoc Networks (MANET). The network topology created by airborne platforms is determined ahead of time and network transitions are calculated offline prior to mission execution. This information is used to run maximum multi-commodity flow algorithms offline to optimize network flow and schedule route changes for each network node. These calculations and timely route modifications increases network efficiency. This increased performance is critical to command and control decision making in the battlefield. One test scenario demonstrates near a 100% success rate when route scheduling and splitting network traffic over an emulated MANET compared to Open Shortest Path First (OSPF) which only achieved around a 71% success rate, and Mesh Made Easy (MME) which achieved about 50% success. Another test scenario demonstrates that the NTO can experience degradation due to schedule delay. Overall, if executed and planned properly, the NTO can significantly improve network Quality of Service (QoS)
- …