Biomechanics and Energetics of Bipedal Locomotion on Uneven Terrain.

Humans navigate uneven terrain in their everyday lives. From trails, grass, and uneven sidewalks, we constantly adapt to various surfaces in our environment. Past research has shown that walking on natural terrain, compared to walking on smooth flat surfaces, results in increased energy expenditure during locomotion. However, the biomechanical adaptations responsible for this energetic increase are unclear, since locomotion research is often conducted either on short walkways or in an outdoor setting, thus limiting data collections. To further our understanding of human locomotion on uneven terrain, I focused on quantifying the biomechanical and energetic changes due to increased terrain variability during walking and running. First, this thesis presents modifications to a regular exercise treadmill to allow for attachment of a separate uneven surface. Using this treadmill, I collected kinetic, kinematic, electromyographic, and energy expenditure data during continuous human walking and running. I showed that humans walking at 1.0m/s on an uneven surface, with a 2.5cm height variability, increased energy expenditure by 0.73W/kg (approx. 28%) compared to walking on smooth terrain. Greater energy expenditure was primarily caused by increased positive work at the hip and knee, with minor contributions from increased muscle activity and step parameter adaptations. I then showed that running at 2.3m/s on the same surface resulted in an energetic increase of 0.48W/kg (approx. 5%) compared to running on even terrain. In contrast to walking, humans compensated for uneven terrain during running by reducing positive work produced by the ankle and adapting a more crouched leg posture. The similar absolute increases in energetic cost between walking and running implied that much of this increase is likely due to surface height variability and changes in mechanical work. Finally, this work presents analytical and simulated analyses for the rimless wheel and simplest walker models. These analyses explored the relationship between gait dynamics, energy input strategies, surface unevenness and the energetic cost of walking. Together, these studies advance our understanding of the relationship between mechanics and energetics of human walking on uneven surfaces and could potentially lead to more robust and energetically efficient legged robots, prostheses and more effective clinical rehabilitation interventions.PhDKinesiology and Mechanical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/111616/1/voloshis_1.pd

Push recovery with stepping strategy based on time-projection control

In this paper, we present a simple control framework for on-line push recovery with dynamic stepping properties. Due to relatively heavy legs in our robot, we need to take swing dynamics into account and thus use a linear model called 3LP which is composed of three pendulums to simulate swing and torso dynamics. Based on 3LP equations, we formulate discrete LQR controllers and use a particular time-projection method to adjust the next footstep location on-line during the motion continuously. This adjustment, which is found based on both pelvis and swing foot tracking errors, naturally takes the swing dynamics into account. Suggested adjustments are added to the Cartesian 3LP gaits and converted to joint-space trajectories through inverse kinematics. Fixed and adaptive foot lift strategies also ensure enough ground clearance in perturbed walking conditions. The proposed structure is robust, yet uses very simple state estimation and basic position tracking. We rely on the physical series elastic actuators to absorb impacts while introducing simple laws to compensate their tracking bias. Extensive experiments demonstrate the functionality of different control blocks and prove the effectiveness of time-projection in extreme push recovery scenarios. We also show self-produced and emergent walking gaits when the robot is subject to continuous dragging forces. These gaits feature dynamic walking robustness due to relatively soft springs in the ankles and avoiding any Zero Moment Point (ZMP) control in our proposed architecture.Comment: 20 pages journal pape

Climbing and Walking Robots

Nowadays robotics is one of the most dynamic fields of scientific researches. The shift of robotics researches from manufacturing to services applications is clear. During the last decades interest in studying climbing and walking robots has been increased. This increasing interest has been in many areas that most important ones of them are: mechanics, electronics, medical engineering, cybernetics, controls, and computers. Today’s climbing and walking robots are a combination of manipulative, perceptive, communicative, and cognitive abilities and they are capable of performing many tasks in industrial and non- industrial environments. Surveillance, planetary exploration, emergence rescue operations, reconnaissance, petrochemical applications, construction, entertainment, personal services, intervention in severe environments, transportation, medical and etc are some applications from a very diverse application fields of climbing and walking robots. By great progress in this area of robotics it is anticipated that next generation climbing and walking robots will enhance lives and will change the way the human works, thinks and makes decisions. This book presents the state of the art achievments, recent developments, applications and future challenges of climbing and walking robots. These are presented in 24 chapters by authors throughtot the world The book serves as a reference especially for the researchers who are interested in mobile robots. It also is useful for industrial engineers and graduate students in advanced study

A Generalized Method for Predictive Simulation-Based Lower Limb Prosthesis Design

Lower limb prostheses are designed to replace the functions and form of the missing biological anatomy. These functions are hypothesized to improve user outcome measures which are negatively affected by receiving an amputation – such as metabolic cost of transport, preferred walking speed, and perceived discomfort during walking. However, the effect of these design functions on the targeted outcome measures is highly variable, suggesting that these relationships are not fully understood. Biomechanics simulation and modeling tools are increasingly capable of analyzing the effects of a design on the resulting user gait. In this work, prothesis-aided gait is optimized in simulation to reduce both muscle effort and peak loads on the residual limb using a generalized prosthesis model. Compared to a traditional revolute powered ankle joint model, a two degree-of freedom generalized model reduced muscle activations by 50% and peak loads by 15%. Simulated prosthesis behaviors corresponding to the optimal gait patterns were translated into a two degree-of-freedom ankle-foot prosthesis design with powered bidirectional linear translation and plantarflexion. The prototype is capable of delivering up to 171 N-m of plantarflexion torque and 499 N of translation force, with 15° dorsi-/35° plantarflexion and 10 cm translation range of motion. The mass and height of the ankle-foot are 2.29 kg and 19.5 cm, respectively. The mass of the entire system including the wearable offboard system is 8.58 kg. This platform is designed to emulate the behavior of the simulated prosthesis, as well as be configurable to emulate alternate behaviors obtained from simulations with different optimization objectives. The prototype is controlled to replicate simulated walking patterns using a high level finite state controller, mid-level stiffness controller, and low level load controller. Closed loop load control has bandwidth of 15 Hz in translation and 7.2 Hz in flexion. Load tracking during walking with a single able-bodied human subject ranges from 93 to 159 N in translation and 4.6 to 21.3 N-m in flexion. The contribution of this work is to provide a framework for predictive simulation-based prosthesis design, evidence of its practical implementation, and the experimental tools to validate future predictive simulation studies

Adjustment of posture as a measure to accommodate uneven ground

In this work, we gained more insight into the functional role of trunk in human locomotion through the exploration of the biomechanical behavior of human walking in the presence of an expected twofold perturbation. First, this work presents the influence of the trunk orientation on leg function with stress on the analogy between locomotion in birds and humans (Chapter 2). By examining the human leg function during walking under changes in the trunk kinematics — up to the maximal sagittal flexion — and comparing it to that of small-bodied birds, we found that mimicking the birds’ posture induces a comparable behavior in leg function despite a different body size and morphology of the segmented legs. Furthermore, comparison of two simplified models for the first time, namely spring and damper in series and parallel spring and damper, revealed that the former model predicts the axial leg forces superior than the latter model during stance phase of walking with various degrees of trunk orientation

The design, validation, and performance evaluation of an untethered ankle exoskeleton

Individuals with neuromuscular impairment from conditions like cerebral palsy face reduced quality of life due to diminishing mobility and independence. Lower-limb exoskeletons, particularly ankle exoskeletons, have potential to aid mobility in impaired populations and augment performance in unimpaired populations and have been extensively researched for the past decade. Few untethered ankle exoskeletons exist due to the difficulty of providing enough mechanical power to offset the weight of the exoskeleton on top of improving human biomechanics and metabolic efficiency. Short battery life is also an obstacle to widespread adoption of untethered ankle exoskeletons in the clinic and at home. In this work, we assess the efficacy of our prototype devices during over-ground walking, design new exoskeleton controllers, develop a new ankle exoskeleton device from the ground up, and evaluate the potential for parallel elasticity to improve the performance of our refined exoskeleton platform. In the first study, we observed that our ankle exoskeleton prototype improved metabolic economy, increased walking speed, and lowered plantarflexor muscle activity in a small cohort of individuals with cerebral palsy during over-ground walking – a significant obstacle to the adoption of exoskeletons in free-living settings. In the second study, we presented a framework for developing adaptive, torque sensor-less open-loop controllers that were competitive with our standard closed-loop controllers in mechanical terms while reducing motor energy consumption and noise. The shortcomings of our prototypes in the first and second chapters inspired a third study to develop new lightweight and modular ankle exoskeleton design with a significantly higher torque and power output and joint-level sensing that improved metabolic economy in both unimpaired and impaired cohorts – our device is the second ever to improve metabolic economy in unimpaired adults. We also presented the first-ever lower-limb exoskeleton usability study. In the final study, we use our new hardware platform to design, validate, and demonstrate that a simple parallel elastic element can significantly improve the performance and battery life of our device. Together, these studies establish our untethered ankle exoskeletons as effective and versatile tools for rehabilitation and human augmentation and support the continued research of exoskeletons in clinical and at-home settings

Bioinspired template-based control of legged locomotion

cient and robust locomotion is a crucial condition for the more extensive use of legged robots in real world applications. In that respect, robots can learn from animals, if the principles underlying locomotion in biological legged systems can be transferred to their artificial counterparts. However, legged locomotion in biological systems is a complex and not fully understood problem. A great progress to simplify understanding locomotion dynamics and control was made by introducing simple models, coined ``templates'', able to represent the overall dynamics of animal (including human) gaits. One of the most recognized models is the spring-loaded inverted pendulum (SLIP) which consists of a point mass atop a massless spring. This model provides a good description of human gaits, such as walking, hopping and running. Despite its high level of abstraction, it supported and inspired the development of successful legged robots and was used as explicit targets for control, over the years. Inspired from template models explaining biological locomotory systems and Raibert's pioneering legged robots, locomotion can be realized by basic subfunctions: (i) stance leg function, (ii) leg swinging and (iii) balancing. Combinations of these three subfunctions can generate different gaits with diverse properties. Using the template models, we investigate how locomotor subfunctions contribute to stabilize different gaits (hopping, running and walking) in different conditions (e.g., speeds). We show that such basic analysis on human locomotion using conceptual models can result in developing new methods in design and control of legged systems like humanoid robots and assistive devices (exoskeletons, orthoses and prostheses). This thesis comprises research in different disciplines: biomechanics, robotics and control. These disciplines are required to do human experiments and data analysis, modeling of locomotory systems, and implementation on robots and an exoskeleton. We benefited from facilities and experiments performed in the Lauflabor locomotion laboratory. Modeling includes two categories: conceptual (template-based, e.g. SLIP) models and detailed models (with segmented legs, masses/inertias). Using the BioBiped series of robots (and the detailed BioBiped MBS models; MBS stands for Multi-Body-System), we have implemented newly-developed design and control methods related to the concept of locomotor subfunctions on either MBS models or on the robot directly. In addition, with involvement in BALANCE project (\url{http://balance-fp7.eu/}), we implemented balance-related control approaches on an exoskeleton to demonstrate their performance in human walking. The outcomes of this research includes developing new conceptual models of legged locomotion, analysis of human locomotion based on the newly developed models following the locomotor subfunction trilogy, developing methods to benefit from the models in design and control of robots and exoskeletons. The main contribution of this work is providing a novel approach for modular control of legged locomotion. With this approach we can identify the relation between different locomotor subfunctions e.g., between balance and stance (using stance force for tuning balance control) or balance and swing (two joint hip muscles can support the swing leg control relating it to the upper body posture) and implement the concept of modular control based on locomotor subfunctions with a limited exchange of sensory information on several hardware platforms (legged robots, exoskeleton)