An Orthogonal-SGD based Learning Approach for MIMO Detection under Multiple Channel Models

In this paper, an orthogonal stochastic gradient descent (O-SGD) based learning approach is proposed to tackle the wireless channel over-training problem inherent in artificial neural network (ANN)-assisted MIMO signal detection. Our basic idea lies in the discovery and exploitation of the training-sample orthogonality between the current training epoch and past training epochs. Unlike the conventional SGD that updates the neural network simply based upon current training samples, O-SGD discovers the correlation between current training samples and historical training data, and then updates the neural network with those uncorrelated components. The network updating occurs only in those identified null subspaces. By such means, the neural network can understand and memorize uncorrelated components between different wireless channels, and thus is more robust to wireless channel variations. This hypothesis is confirmed through our extensive computer simulations as well as performance comparison with the conventional SGD approach.Comment: 6 pages, 4 figures, conferenc

Array Architectures and Physical Layer Design for Millimeter-Wave Communications Beyond 5G

Ever increasing demands in mobile data rates have resulted in exploration of millimeter-wave (mmW) frequencies for the next generation (5G) wireless networks. Communications at mmW frequencies is presented with two keys challenges. Firstly, high propagation loss requires base stations (BSs) and user equipment (UEs) to use a large number of antennas and narrow beams to close the link with sufficient received signal power. Consequently, communications using narrow beams create a new challenge in channel estimation and link establishment based on fine angular probing. Current mmW system use analog phased arrays that can probe only one angle at the time which results in high latency during link establishment and channel tracking. It is desirable to design low latency beam training by exploring both physical layer designs and array architectures that could replace current 5G approaches and pave the way to the communications for frequency bands in higher mmW band and sub-THz region where larger antenna arrays and communications bandwidth can be exploited. To this end, we propose a novel signal processing techniques exploiting unique properties of mmW channel, and show both theoretically, in simulation and experiments its advantages over conventional approaches. Secondly, we explore different array architecture design and analyze their trade-offs between spectral efficiency and power consumption and area. For comprehensive comparison, we have developed a methodology for optimal design of system parameters for different array architecture candidates based on the spectral efficiency target, and use these parameters to estimate the array area and power consumption based on the circuits reported in the literature. We show that the hybrid analog and digital architectures have severe scalability concerns in radio frequency signal distribution with increased array size and spatial multiplexing levels, while the fully-digital array architectures have the best performance and power/area trade-offs.The developed approaches are based on a cross-disciplinary research that combines innovation in model based signal processing, machine learning, and radio hardware. This work is the first to apply compressive sensing (CS), a signal processing tool that exploits sparsity of mmW channel model, to accelerate beam training of mmW cellular system. The algorithm is designed to address practical issues including the requirement of cell discovery and synchronization that involves estimation of angular channel together with carrier frequency offset and timing offsets. We have analyzed the algorithm performance in the 5G compliant simulation and showed that an order of magnitude saving is achieved in initial access latency for the desired channel estimation accuracy. Moreover, we are the first to develop and implement a neural network assisted compressive beam alignment to deal with hardware impairments in mmW radios. We have used 60GHz mmW testbed to perform experiments and show that neural networks approach enhances alignment rate compared to CS. To further accelerate beam training, we proposed a novel frequency selective probing beams using the true-time-delay (TTD) analog array architecture. Our approach utilizes different subcarriers to scan different directions, and achieves a single-shot beam alignment, the fastest approach reported to date. Our comprehensive analysis of different array architectures and exploration of emerging architectures enabled us to develop an order of magnitude faster and energy efficient approaches for initial access and channel estimation in mmW systems

Analysis and Design of Algorithms for the Improvement of Non-coherent Massive MIMO based on DMPSK for beyond 5G systems

Mención Internacional en el título de doctorNowadays, it is nearly impossible to think of a service that does not rely on wireless communications. By the end of 2022, mobile internet represented a 60% of the total global online traffic. There is an increasing trend both in the number of subscribers and in the traffic handled by each subscriber. Larger data rates, smaller extreme-to-extreme (E2E) delays and greater number of devices are current interests for the development of mobile communications. Furthermore, it is foreseen that these demands should also be fulfilled in scenarios with stringent conditions, such as very fast varying wireless communications channels (either in time or frequency) or scenarios with power constraints, mainly found when the equipment is battery powered. Since most of the wireless communications techniques and standards rely on the fact that the wireless channel is somehow characterized or estimated to be pre or post-compensated in transmission (TX) or reception (RX), there is a clear problem when the channels vary rapidly or the available power is constrained. To estimate the wireless channel and obtain the so-called channel state information (CSI), some of the available resources (either in time, frequency or any other dimension), are utilized by including known signals in the TX and RX typically known as pilots, thus avoiding their use for data transmission. If the channels vary rapidly, they must be estimated many times, which results in a very low data efficiency of the communications link. Also, in case the power is limited or the wireless link distance is large, the resulting signal-tointerference- plus-noise ratio (SINR) will be low, which is a parameter that is directly related to the quality of the channel estimation and the performance of the data reception. This problem is aggravated in massive multiple-input multiple-output (massive MIMO), which is a promising technique for future wireless communications since it can increase the data rates, increase the reliability and cope with a larger number of simultaneous devices. In massive MIMO, the base station (BS) is typically equipped with a large number of antennas that are coordinated. In these scenarios, the channels must be estimated for each antenna (or at least for each user), and thus, the aforementioned problem of channel estimation aggravates. In this context, algorithms and techniques for massive MIMO without CSI are of interest. This thesis main topic is non-coherent massive multiple-input multiple-output (NC-mMIMO) which relies on the use of differential M-ary phase shift keying (DMPSK) and the spatial diversity of the antenna arrays to be able to detect the useful transmitted data without CSI knowledge. On the one hand, hybrid schemes that combine the coherent and non-coherent schemes allowing to get the best of both worlds are proposed. These schemes are based on distributing the resources between non-coherent (NC) and coherent data, utilizing the NC data to estimate the channel without using pilots and use the estimated channel for the coherent data. On the other hand, new constellations and user allocation strategies for the multi-user scenario of NC-mMIMO are proposed. The new constellations are better than the ones in the literature and obtained using artificial intelligence techniques, more concretely evolutionary computation.This work has received funding from the European Union Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie ETN TeamUp5G, grant agreement No. 813391. The PhD student was the Early Stage Researcher (ESR) number 2 of the project. This work has also received funding from the Spanish National Project IRENE-EARTH (PID2020-115323RB-C33) (MINECO/AEI/FEDER, UE), which funded the work of some coauthors.Programa de Doctorado en Multimedia y Comunicaciones por la Universidad Carlos III de Madrid y la Universidad Rey Juan CarlosPresidente: Luis Castedo Ribas.- Secretario: Matilde Pilar Sánchez Fernández.- Vocal: Eva Lagunas Targaron

A Survey on Fundamental Limits of Integrated Sensing and Communication

The integrated sensing and communication (ISAC), in which the sensing and communication share the same frequency band and hardware, has emerged as a key technology in future wireless systems due to two main reasons. First, many important application scenarios in fifth generation (5G) and beyond, such as autonomous vehicles, Wi-Fi sensing and extended reality, requires both high-performance sensing and wireless communications. Second, with millimeter wave and massive multiple-input multiple-output (MIMO) technologies widely employed in 5G and beyond, the future communication signals tend to have high-resolution in both time and angular domain, opening up the possibility for ISAC. As such, ISAC has attracted tremendous research interest and attentions in both academia and industry. Early works on ISAC have been focused on the design, analysis and optimization of practical ISAC technologies for various ISAC systems. While this line of works are necessary, it is equally important to study the fundamental limits of ISAC in order to understand the gap between the current state-of-the-art technologies and the performance limits, and provide useful insights and guidance for the development of better ISAC technologies that can approach the performance limits. In this paper, we aim to provide a comprehensive survey for the current research progress on the fundamental limits of ISAC. Particularly, we first propose a systematic classification method for both traditional radio sensing (such as radar sensing and wireless localization) and ISAC so that they can be naturally incorporated into a unified framework. Then we summarize the major performance metrics and bounds used in sensing, communications and ISAC, respectively. After that, we present the current research progresses on fundamental limits of each class of the traditional sensing and ISAC systems. Finally, the open problems and future research directions are discussed

Millimeter wave link configuration with hybrid MIMO architectures

The use of multiple antennas, widely known as MIMO technology, is a key feature to deploy mmWave communication systems enabling high-data-rate applications. With more than two decades of global experience in deploying Wi-Fi and cellular communication using sub-6 GHz frequency bands, simply repurposing these designs for mmWave bands would fail to account for additional propagation impairments and circuit design constraints at these higher frequencies. A solution to overcome the propagation challenges is the use of multiple directional communication beams, whereby proper alignment between transceivers provides sufficient link quality to enable reliable decoding of the transmitted data. In this dissertation, efficient link configuration solutions suitable for mmWave cellular communications are developed. To gain some insight into the achievable performance of mmWave systems, two broadband channel-estimation-based link configuration solutions are proposed for MIMO-OFDM systems, in which both the transmitter and receiver are assumed to be perfectly synchronized. The proposed solution exploits the spatially common sparsity in the mmWave channel and enables efficient acquisition of the CSI while allowing the use of multiple RF chains on both the transmitter and receiver sides. In a simplified scenario, the CRLB for the channel estimation problem is derived, and the proposed channel estimation algorithms are shown to both outperform prior work in communication performance and exhibit excellent estimation performance. Furthermore, the proposed algorithms are assessed in a more challenging scenario with realistic channel parameters, and it is shown that both near-optimal spectral efficiency and low BER can be attained with lower overhead and computational complexity than prior solutions. Next, the impact of imperfect CFO synchronization on the channel estimation problem is analyzed under a narrowband channel model. The CRLB for the estimation of the different unknown parameters involved in the problem is theoretically analyzed, and closed-form expressions are provided for the estimation of the different parameters. Under a joint estimation-theoretic and CS framework, a low-complexity multi-stage solution is proposed to estimate both the different unknown synchronization parameters and the large-dimensional mmWave MIMO channel. Different trade-offs between estimation, spectral efficiency, and overhead performance are exposed, and the proposed estimators are shown to be asymptotically optimal in the low SNR regime. The proposed solution is assessed under a channel model with several clusters and rays per cluster, and is shown to attain near-optimal spectral efficiency values in both the low and high SNR regimes. The computational complexity of the proposed solution is also analyzed, in which it is shown to achieve a marginal increase in computational complexity with respect to the solution proposed in the previous contribution. Finally, the impact of TO, CFO, and PN impairments on the channel estimation problem is analyzed under a broadband channel model. The problem of time-frequency synchronization under PN impairments is theoretically analyzed, and the proposed solutions to the synchronization problem are exploited to estimate the frequency-selective mmWave MIMO channel. The hybrid CRLB for the estimation of the different synchronization impairments is analyzed, and closed-form expressions leveraging the information coupling between the different impairments are provided. The previously proposed joint estimation-theoretic and CS framework is extended to frequency-selective scenarios, and two low-complexity multi-stage solutions are proposed to estimate both the different synchronization impairments and the large-dimensional mmWave MIMO channel. The first solution relies on a batch-processing LMMSE-based EM algorithm to estimate the different synchronization impairments, while the second solution uses a sequential-processing EKF-RTS-based EM algorithm, thereby reducing computational complexity. Thereafter, both the hybrid CRLB for the estimation of the equivalent beamformed complex channels and the estimates for these parameters are exploited to estimate the large-dimensional frequency-selective mmWave MIMO channel. Finally, a joint PN and data detection algorithm is proposed for data transmission under the 5G NR frame structure. The proposed solutions are evaluated using a 5G NR-based channel model, and different trade-offs between estimation performance, computational complexity, overhead, achievable spectral efficiency and BER are exposed, and comparisons with prior work are also provided. The results show that mmWave link configuration using hybrid MIMO architectures can be established with low overhead without assuming synchronization, even in the low SNR regime.Electrical and Computer Engineerin