A VHDL-AMS Simulation Environment for an UWB Impulse Radio Transceiver

Ultra-Wide-Band (UWB) communication based on the impulse radio paradigm is becoming increasingly popular. According to the IEEE 802.15 WPAN Low Rate Alternative PHY Task Group 4a, UWB will play a major role in localization applications, due to the high time resolution of UWB signals which allow accurate indirect measurements of distance between transceivers. Key for the successful implementation of UWB transceivers is the level of integration that will be reached, for which a simulation environment that helps take appropriate design decisions is crucial. Owing to this motivation, in this paper we propose a multiresolution UWB simulation environment based on the VHDL-AMS hardware description language, along with a proper methodology which helps tackle the complexity of designing a mixed-signal UWB System-on-Chip. We applied the methodology and used the simulation environment for the specification and design of an UWB transceiver based on the energy detection principle. As a by-product, simulation results show the effectiveness of UWB in the so-called ranging application, that is the accurate evaluation of the distance between a couple of transceivers using the two-way-ranging metho

On the Capacity-Achieving Input of Channels with Phase Quantization

Several information-theoretic studies on channels with output quantization have identified the capacity-achieving input distributions for different fading channels with 1-bit in-phase and quadrature (I/Q) output quantization. But can analytical results on the capacity-achieving input also be obtained for multi-bit quantization? We answer the question in the affirmative by considering multi-bit phase quantization. We first consider a complex Gaussian channel with $b$-bit phase-quantized output and prove that the capacity-achieving distribution is a rotated $2^b$-phase shift keying (PSK). The analysis is then extended to multiple fading scenarios. We show that the optimality of rotated $2^b$-PSK continues to hold under noncoherent fast fading Rician channels with $b$-bit phase quantization when line-of-sight (LoS) is present. When channel state information (CSI) is available at the receiver, we identify $\frac{2\pi}{2^b}$-symmetry and constant amplitude as the necessary and sufficient conditions for the ergodic capacity-achieving input distribution; which a $2^b$-PSK satisfies. Finally, an optimum power control scheme is presented which achieves ergodic capacity when CSI is also available at the transmitter.Comment: Submitted to IEEE Transactions on Information Theor

Implementation Aspects of a Transmitted-Reference UWB Receiver

In this paper, we discuss the design issues of an ultra wide band (UWB) receiver targeting a single-chip CMOS implementation for low data-rate applications like ad hoc wireless sensor networks. A non-coherent transmitted reference (TR) receiver is chosen because of its small complexity compared to other architectures. After a brief recapitulation of the UWB fundamentals and a short discussion on the major differences between coherent and non-coherent receivers, we discuss issues, challenges and possible design solutions. Several simulation results obtained by means of a behavioral model are presented, together with an analysis of the trade-off between performance and complexity in an integrated circuit implementation

Array Architectures and Physical Layer Design for Millimeter-Wave Communications Beyond 5G

Ever increasing demands in mobile data rates have resulted in exploration of millimeter-wave (mmW) frequencies for the next generation (5G) wireless networks. Communications at mmW frequencies is presented with two keys challenges. Firstly, high propagation loss requires base stations (BSs) and user equipment (UEs) to use a large number of antennas and narrow beams to close the link with sufficient received signal power. Consequently, communications using narrow beams create a new challenge in channel estimation and link establishment based on fine angular probing. Current mmW system use analog phased arrays that can probe only one angle at the time which results in high latency during link establishment and channel tracking. It is desirable to design low latency beam training by exploring both physical layer designs and array architectures that could replace current 5G approaches and pave the way to the communications for frequency bands in higher mmW band and sub-THz region where larger antenna arrays and communications bandwidth can be exploited. To this end, we propose a novel signal processing techniques exploiting unique properties of mmW channel, and show both theoretically, in simulation and experiments its advantages over conventional approaches. Secondly, we explore different array architecture design and analyze their trade-offs between spectral efficiency and power consumption and area. For comprehensive comparison, we have developed a methodology for optimal design of system parameters for different array architecture candidates based on the spectral efficiency target, and use these parameters to estimate the array area and power consumption based on the circuits reported in the literature. We show that the hybrid analog and digital architectures have severe scalability concerns in radio frequency signal distribution with increased array size and spatial multiplexing levels, while the fully-digital array architectures have the best performance and power/area trade-offs.The developed approaches are based on a cross-disciplinary research that combines innovation in model based signal processing, machine learning, and radio hardware. This work is the first to apply compressive sensing (CS), a signal processing tool that exploits sparsity of mmW channel model, to accelerate beam training of mmW cellular system. The algorithm is designed to address practical issues including the requirement of cell discovery and synchronization that involves estimation of angular channel together with carrier frequency offset and timing offsets. We have analyzed the algorithm performance in the 5G compliant simulation and showed that an order of magnitude saving is achieved in initial access latency for the desired channel estimation accuracy. Moreover, we are the first to develop and implement a neural network assisted compressive beam alignment to deal with hardware impairments in mmW radios. We have used 60GHz mmW testbed to perform experiments and show that neural networks approach enhances alignment rate compared to CS. To further accelerate beam training, we proposed a novel frequency selective probing beams using the true-time-delay (TTD) analog array architecture. Our approach utilizes different subcarriers to scan different directions, and achieves a single-shot beam alignment, the fastest approach reported to date. Our comprehensive analysis of different array architectures and exploration of emerging architectures enabled us to develop an order of magnitude faster and energy efficient approaches for initial access and channel estimation in mmW systems

On the MISO Channel with Feedback: Can Infinitely Massive Antennas Achieve Infinite Capacity?

We consider communication over a multiple-input single-output (MISO) block fading channel in the presence of an independent noiseless feedback link. We assume that the transmitter and receiver have no prior knowledge of the channel state realizations, but the transmitter and receiver can acquire the channel state information (CSIT/CSIR) via downlink training and feedback. For this channel, we show that increasing the number of transmit antennas to infinity will not achieve an infinite capacity, for a finite channel coherence length and a finite input constraint on the second or fourth moment. This insight follows from our new capacity bounds that hold for any linear and nonlinear coding strategies, and any channel training schemes. In addition to the channel capacity bounds, we also provide a characterization on the beamforming gain that is also known as array gain or power gain, at the regime with a large number of antennas.Comment: This work has been submitted to the IEEE Transactions on Information Theory. It was presented in part at ISIT201

Design and analysis of a high-rate acoustic link for underwater video transmission

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Ocean Engineering, 2004.Includes bibliographical references (leaves 74-75).A high bit rate acoustic link for underwater video transmission is examined. Currently, encoding standards support video transmission at bit rates as low as 64 kbps. While this rate is still above the limit of commercially available acoustic modems, prototype acoustic modems based on phase coherent modulation/detection have demonstrated successful transmission at 30 kbps over a deep water channel. The key to bridging the remaining gap between the bit-rate needed for video transmission and that supported by the acoustic channel lies in two approaches: use of efficient image/video compression algorithms and use of high-level bandwidth-efficient modulation methods. An experimental system, based on discrete cosine transform (DCT) and Huffman entropy coding for image compression, and variable rate M-ary quadrature amplitude modulation (QAM) was implemented. Phase-coherent equalization is accomplished by joint operation of a decision feedback equalizer (DFE) and a second order phase locked loop (PLL). System performance is demonstrated experimentally, using transmission rate of 25000 symbols/sec at a carrier frequency of 75 kHz over a 10 m vertical path.(cont.) Excellent results were obtained, thus demonstrating bit rates as high as 150 kbps, which are sufficient for real-time transmission of compressed video. As an alternative to conventional QAM signaling, whose high-level constellations are sensitive to phase distortions induced by the channel, M-ary differential amplitude and phase shift keying (DAPSK) was used. DAPSK does not require explicit carrier phase synchronization at the receiver, but instead relies on simple differentially coherent detection. Receiver processing includes a linear equalizer whose coefficients are adjusted using a modified linear least square (LMS) algorithm. Simulation results confirm good performance of the differentially coherent equalization scheme employed.by Konstantinos Pelekanakis.S.M