Short-Packet Transmission over a Bidirectional Massive MIMO link

We consider the transmission of short packets over a bidirectional communication link where multiple devices, e.g., sensors and actuators, exchange small-data payloads with a base station equipped with a large antenna array. Using results from finite-blocklength information theory, we characterize the minimum SNR required to achieve a target error probability for a fixed packet length and a fixed payload size. Our nonasymptotic analysis, which applies to the scenario in which the bidirectional communication is device-initiated, and also to the more challenging case when it is base-station initiated, provides guidelines on the design of massive multiple-input multiple-output links that need to support sporadic ultra-reliable low-latency transmissions. Specifically, it allows us to determine the optimal amount of resources that need to be dedicated to the acquisition of channel state information

Short-Packet Transmission over a Bidirectional Massive MIMO link

We consider the transmission of short packets over a bidirectional communication link where multiple devices, e.g., sensors and actuators, exchange small-data payloads with a base station equipped with a large antenna array. Using results from finite-blocklength information theory, we characterize the minimum SNR required to achieve a target error probability for a fixed packet length and a fixed payload size. Our nonasymptotic analysis, which applies to the scenario in which the bidirectional communication is device-initiated, and also to the more challenging case when it is base-station initiated, provides guidelines on the design of massive multiple-input multiple-output links that need to support sporadic ultra-reliable low-latency transmissions. Specifically, it allows us to determine the optimal amount of resources that need to be dedicated to the acquisition of channel state information.Comment: 5 pages, presented at Asiloma

Full-Diversity QO-STBC Technique for Large-Antenna MIMO Systems

YesThe need to achieve high data rates in modern telecommunication systems, such as 5G standard, motivates the study and development of large antenna and multiple-input multiple-output (MIMO) systems. This study introduces a large antenna-order design of MIMO quasi-orthogonal space-time block code (QO-STBC) system that achieves better signal-to-noise ratio (SNR) and bit-error ratio (BER) performances than the conventional QO-STBCs with the potential for massive MIMO (mMIMO) configurations. Although some earlier MIMO standards were built on orthogonal space-time block codes (O-STBCs), which are limited to two transmit antennas and data rates, the need for higher data rates motivates the exploration of higher antenna configurations using different QO-STBC schemes. The standard QO-STBC offers a higher number of antennas than the O-STBC with the full spatial rate. Unfortunately, also, the standard QO-STBCs are not able to achieve full diversity due to self-interference within their detection matrices; this diminishes the BER performance of the QO-STBC scheme. The detection also involves nonlinear processing, which further complicates the system. To solve these problems, we propose a linear processing design technique (which eliminates the system complexity) for constructing interference-free QO-STBCs and that also achieves full diversity using Hadamard modal matrices with the potential for mMIMO design. Since the modal matrices that orthogonalize QO-STBC are not sparse, our proposal also supports O-STBCs with a well-behaved peak-to-average power ratio (PAPR) and better BER. The results of the proposed QO-STBC outperform other full diversity techniques including Givens-rotation and the eigenvalue decomposition (EVD) techniques by 15 dB for both MIMO and multiple-input single-output (MISO) antenna configurations at 10−3 BER. The proposed interference-free QO-STBC is also implemented for 16×NR and 32×NR MIMO systems, where NR≤2. We demonstrate 8 x 16 and 32 transmit antenna-enabled MIMO systems with the potential for mMIMO design applications with attractive BER and PAPR performance characteristics

Millimeter Wave MISO-OFDM Transmissions in an Intra-Wagon Environment

[EN] In this paper, the maximum achievable throughput is analyzed in the intra-wagon channel when multiple-input single-output (MISO) and orthogonal frequency division multiplexing (OFDM), MISO-OFDM, techniques are used. This analysis is performed from real wideband propagation channel measurements at 28 and 37 GHz, two potential frequency bands to deploy the future fifth-generation (5G) wireless communications networks. Four different scenarios in terms of the access point (AP) and user equipment (UE) positions inside the wagon have been considered, using 4 and 8 antennas at the AP. The performance of both quasi-orthogonal space-time block code (QSTBC), combined with Hadamard matrices, and transmit beamforming techniques is studied and evaluated from simulation results. The simulation results take into account the signal-to-noise ratio (SNR) and the antenna correlation for each antenna array configuration at the AP. These results provide useful insight to better understand the intra-wagon channel properties and deploy the future 5G wireless networks in this particular scenario at mmWave frequencies, where high-data-rates are expected to support different types of digital applications.This work was supported in part by the Ministerio de Economia y Competitividad MINECO, Spain, under Grant TEC2016-78028C3-2-P and Grant TEC2017-86779-C2-2-R and in part by the European FEDER Funds.Sanchis Borrás, C.; Molina-García-Pardo, J.; Rubio Arjona, L.; Pascual-García, J.; Rodrigo Peñarrocha, VM.; Juan Llacer, L.; Reig, J. (2021). Millimeter Wave MISO-OFDM Transmissions in an Intra-Wagon Environment. IEEE Transactions on Intelligent Transportation Systems. 22(8):4899-4908. https://doi.org/10.1109/TITS.2020.2983028S4899490822

Massive MIMO transmission techniques

Next generation of mobile communication systems must support astounding data traffic increases, higher data rates and lower latency, among other requirements. These requirements should be met while assuring energy efficiency for mobile devices and base stations. Several technologies are being proposed for 5G, but a consensus begins to emerge. Most likely, the future core 5G technologies will include massive MIMO (Multiple Input Multiple Output) and beamforming schemes operating in the millimeter wave spectrum. As soon as the millimeter wave propagation difficulties are overcome, the full potential of massive MIMO structures can be tapped. The present work proposes a new transmission system with bi-dimensional antenna arrays working at millimeter wave frequencies, where the multiple antenna configurations can be used to obtain very high gain and directive transmission in point to point communications. A combination of beamforming with a constellation shaping scheme is proposed, that enables good user isolation and protection against eavesdropping, while simultaneously assuring power efficient amplification of multi-level constellations

Millimetre wave frequency band as a candidate spectrum for 5G network architecture : a survey

In order to meet the huge growth in global mobile data traffic in 2020 and beyond, the development of the 5th Generation (5G) system is required as the current 4G system is expected to fall short of the provision needed for such growth. 5G is anticipated to use a higher carrier frequency in the millimetre wave (mm-wave) band, within the 20 to 90 GHz, due to the availability of a vast amount of unexploited bandwidth. It is a revolutionary step to use these bands because of their different propagation characteristics, severe atmospheric attenuation, and hardware constraints. In this paper, we carry out a survey of 5G research contributions and proposed design architectures based on mm-wave communications. We present and discuss the use of mm-wave as indoor and outdoor mobile access, as a wireless backhaul solution, and as a key enabler for higher order sectorisation. Wireless standards such as IEE802.11ad, which are operating in mm-wave band have been presented. These standards have been designed for short range, ultra high data throughput systems in the 60 GHz band. Furthermore, this survey provides new insights regarding relevant and open issues in adopting mm-wave for 5G networks. This includes increased handoff rate and interference in Ultra-Dense Network (UDN), waveform consideration with higher spectral efficiency, and supporting spatial multiplexing in mm-wave line of sight. This survey also introduces a distributed base station architecture in mm-wave as an approach to address increased handoff rate in UDN, and to provide an alternative way for network densification in a time and cost effective manner