A Comprehensive Review on Recent Developments of LED Drivers

Background: In these recent years, LED lighting has been widely implemented for household and industrial applications. By implementing the correct topology, the performance of a LED driver can be improved in terms of efficiency, power factor, lifespan, size and cost of development. Objective: This paper aims to provide a comprehensive review on the latest trends of LED driver design to serve as a useful guide for design engineers and researchers. Result: Latest research journals and conference proceedings have been reviewed. Conclusion: There are suitable converter topologies for LED drivers of varied power levels, with the flyback converter being the most suitable for applications of less than 100W. When designing the LED driver, considerations must be made on the power factor, efficiency, dimming capability, and lifespan

조명 장치에서 플리커를 낮은 위험 수준으로 줄이기 위해 두 개의 평행한 플로팅 벅 구조를 사용한 교류-직류 엘이디 구동 회로

학위논문 (박사)-- 서울대학교 대학원 : 전기·컴퓨터공학부, 2016. 8. 정덕균.This dissertation presents an ac-dc LED driver that consists of two parallel floating buck converters. To buffer the twice-line-frequency energy, one floating buck converter conveys energy to a storage capacitor, simultaneously performing the power factor correction (PFC). The other floating buck converter regulates the LED current to maintain a constant brightness in the LEDs for reducing the light flicker to low-risk levels. The proposed architecture reduces the voltage stress and the size of the storage capacitor, enabling the use of a film capacitor instead of an electrolytic capacitor. Considering the power factor and the flicker standards, a de-sign procedure to achieve a high power factor, while minimizing the storage capac-itance and the LED current ripple, is presented. A prototype of the proposed LED driver has been implemented with an on-chip controller IC fabricated in a 0.35 μm CMOS process and its functionality and performance have been verified experi-mentally. It demonstrates a power factor of 0.94 and a peak power efficiency of 85.4% with an LED current ripple of 6.5%, while delivering 15 W to the LEDs.CHAPTER 1 INTRODUCTION 1 1.1 MOTIVATIONS 1 1.2 FLICKER METRICS AND STANDARDS 5 1.3 PRIOR WORKS 9 1.4 THESIS OBJECTIVES AND ORGANIZATION 15 CHAPTER 2 BACKGROUND ON LED DRIVER 17 2.1 POWER CONVERTER TOPOLOGIES 17 2.1.1 LINEAR REGULATOR 17 2.1.2 SWITCHED-CAPACITOR CONVERTER 18 2.1.3 INDUCTOR-BASED CONVERTERS 19 2.2 BASICS FOR LED DRIVERS 31 2.2.1 LED CONFIGURATIONS 31 2.2.2 CURRENT SENSING TECHNIQUES IN LED DRIVERS 32 2.3 PFC TECHNIQUES IN LED DRIVERS 35 2.3.1 POWER FACTOR 35 2.3.2 PASSIVE PFC CIRCUIT 35 2.3.3 ACTIVE PFC CIRCUIT 36 2.4 DIMMING TECHNIQUES 38 CHAPTER 3 DESIGN OF AN AC-DC LED DRIVER WITH A TWO PARALLEL FLOATING BUCK TOPOLOGY 40 3.1 PROPOSED SYSTEM ARCHITECTURE AND OPERATION PRINCIPLE 40 3.1.1 OVERALL ARCHITECTURE 40 3.1.2 OPERATION PRINCIPLE 42 3.1.3 DISCUSSION ON DIMMING 50 3.2 DESIGN OF THE PROPOSED TOPOLOGY 52 3.2.1 RELATIONSHIP BETWEEN THE INPUT CURRENT WAVEFORM AND THE POWER FACTOR 52 3.2.2 DESIGN CONSIDERATIONS FOR DECIDING THE STORAGE CAPACITOR VOLTAGE 54 3.2.3 ANALYSIS OF THE PROPOSED LED DRIVER WITH LINE VOLTAGE VARIATIONS 57 3.2.4 DESIGN OF THE FLOATING BUCK CONVERTER FOR PFC AND ENERGY BUFFERING 59 3.2.5 DESIGN OF THE FLOATING BUCK CONVERTER FOR LED CURRENT REGULATION 63 3.3 CIRCUIT IMPLEMENTATION 67 3.3.1 CONTROLLER CIRCUIT ARCHITECTURE 67 3.3.2 LED CURRENT REGULATION LOOP DESIGN 68 3.3.3 BUILDING BLOCKS 70 CHAPTER 4 EXPERIMENTAL RESULTS 79 4.1 EXPERIMENTAL SETUP 79 4.2 MEASUREMENT RESULTS 84 CHAPTER 5 CONCLUSION 93 BIBLIOGRAPHY 94 초록 101Docto

Energy efficient control for power management circuits operating from nano-watts to watts

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2013.Cataloged from PDF version of thesis.Includes bibliographical references (p. 163-172).Energy efficiency and form factor are the key driving forces in today's power electronics. All power delivery circuits, irrespective of the magnitude of power, basically consists of power trains, gate drivers and control circuits. Although the control circuits are primarily required for regulation, these circuits can play a crucial role in achieving high efficiency and/or minimizing overall system form-factor. In this thesis, power converter circuits, spanning a wide operating range- from nano-watts to watts, are presented while highlighting techniques for using digital control circuits not just for regulation but also to achieve high system efficiency and smaller system form-factor. The first part of the thesis presents a power management unit of an autonomous wireless sensor that sustains itself by harvesting energy from the endo-cochlear potential (EP), the 70-100mV electrochemical potential inside the mammalian inner ear. Due to the anatomical constraints, the total extractable power from the EP is limited to 1.1-6.3nW. A low switching frequency boost converter is employed to increase the input voltage to a higher voltage usable by CMOS circuits in the sensor. Ultra-low power digital control circuits with timers help keep the quiescent power of the power management unit down to 544pW. Further, a charge-pump is used to implement leakage reduction techniques in the sensor. This work demonstrates how digital low power control circuit design can help improve converter efficiency and ensure system sustainability. All circuits have been implemented on a 0.18[mu]m CMOS process. The second part of the thesis discusses an energy harvesting architecture that combines energy from multiple energy harvesting sources- photovoltaic, thermoelectric and piezoelectric sources. Digital control circuits that configure the power trains to new efficient system architectures with maximum power point tracking are presented, while using a single inductor to combine energy from the aforementioned energy sources all at the same time. A dual-path architecture for energy harvesting systems is proposed. This provides a peak efficiency improvement of 11-13% over the traditional two stage approach. The system can handle input voltages from 20mV to 5V and is also capable of extracting maximum power from individual harvesters all at the same time utilizing a single inductor. A proposed completely digital timebased power monitor is used for achieving maximum power point tracking for the photovoltaic harvester. This has a peak tracking efficiency of 96%. The peak efficiencies achieved with inductor sharing are 83%, 58% and 79% for photovoltaic boost, thermoelectric boost and piezoelectric buck-boost converters respectively. The switch matrix and the control circuits are implemented on a 0.35pm CMOS process. This part of the thesis highlights how digital control circuits can help reconfigure power converter architectures for improving efficiency and reducing form-factors. The last part of the thesis deals with a power management system for an offline 22W LED driver. In order to reduce the system form factor, Gallium Nitride (GaN) transistors capable of high frequency switching have been utilized with a Quasi-Resonant Inverted Buck architecture. A burst mode digital controller has been used to perform dimming control and power factor correction (PFC) for the LED driver. The custom controller and driver IC was implemented in a 0.35[mu]m CMOS process. The LED driver achieves a peak efficiency of 90.6% and a 0.96 power factor. Due to the high power level of the driver, the digital controller is primarily used for regulation purposes in this system, although the digital nature of the controller helps remove the passives that would be normally present in analog controllers. In this thesis, apart from regulation, control circuit enabled techniques have been used to improve efficiency and reduce system form factor. Low power design and control for reconfigurable power train architectures help improve the overall power converter efficiency. Digital control circuits have been used to reduce the form factor by enabling inductor sharing in a system with multiple power converters or by removing the compensator passives.by Saurav Bandyopadhyay.Ph.D

Fault Tolerant DC–DC Converters at Homes and Offices

The emergence of direct current (DC) microgrids within the context of residential buildings and offices brings in a whole new paradigm in energy distribution. As a result, a set of technical challenges arise, concerning the adoption of efficient, cost-effective, and reliable DC-compatible power conditioning solutions, suitable to interface DC microgrids and energy consuming elements. This thesis encompasses the development of DC–DC power conversion solutions, featuring improved availability and efficiency, suitable to meet the requirements of a comprehensive set of end-uses commonly found in homes and offices. Based on the energy consumption profiles and requirements of the typical elements found at homes and offices, three distinctive groups are established: light-emitting diode (LED) lighting, electric vehicle (EV) charging, and general appliances. For each group, a careful evaluation of the criteria to fulfil is performed, based on which at least one DC–DC power converter is selected and investigated. Totally, a set of five DC–DC converter topologies are addressed in this work, being specific aspects related to fault diagnosis and/or fault tolerance analysed with particular detail in two of them. Firstly, mathematical models are described for LED devices and EV batteries, for the development of a theoretical analysis of the systems’ operation through computational simulations. Based on a compilation of requirements to account for in each end-use (LED lighting, EV charging, and general appliances), brief design considerations are drawn for each converter topology, regarding their architecture and control strategy. Aiming a detailed understanding of the two DC–DC power conversion systems subjected to thorough evaluation in this work – interleaved boost converter and fault-tolerant single-inductor multiple-output (SIMO) converter – under both normal and abnormal conditions, the operation of the systems is evaluated in the presence of open-circuit (OC) faults. Parameters of interest are monitored and evaluated to understand how the failures impact the operation of the entire system. At this stage, valuable information is obtained for the development of fault diagnosis strategies. Taking profit of the data collected in the analysis, a novel fault diagnostic strategy is presented, targeting interleaved DC–DC boost converters for general appliances. Ease of implementation, fast diagnostic and robustness against false alarms distinguish the proposed approach over the state-of-the-art. Its effectiveness is confirmed through a set of operation scenarios, implemented in both simulation environment and experimental context. Finally, an extensive set of reconfiguration strategies is presented and evaluated, aiming to grant fault tolerance capability to the multiple DC–DC converter topologies under analysis. A hybrid reconfiguration approach is developed for the interleaved boost converter. It is demonstrated that the combination of reconfiguration strategies promotes remarkable improvements on the post-fault operation of the converter. In addition, an alternative SIMO converter architecture, featuring inherent tolerance against OC faults, is presented and described. To exploit the OC fault tolerance capability of the fault-tolerant SIMO converter, a converter topology targeted at residential LED lighting systems, two alternative reconfiguration strategies are presented and evaluated in detail. Results obtained from computational simulations and experimental tests confirm the effectiveness of the approaches. To further improve the fault-tolerant SIMO converter with regards to its robustness against sensor faults, while simplifying its hardware architecture, a sensorless current control strategy is presented. The proposed control strategy is evaluated resorting to computational simulations.O surgimento de micro-redes em corrente contínua (CC) em edifícios residenciais e de escritórios estabelece um novo paradigma no domínio da distribuição de energia. Como consequência disso, surge uma panóplia de desafios técnicos ligados à adopção de soluções de conversão de energia, compatíveis com CC, que demonstrem ser eficientes, rentáveis e fiáveis, capazes de estabelecer a interface entre micro-redes em CC e as cargas alimentadas por esse sistema de energia. Até aos dias de hoje, os conversores CC–CC têm vindo a ser maioritariamente utilizados em aplicações de nicho, que geralmente envolvem níveis de potência reduzidos. Porém, as perspectivas futuras apontam para a adopção, em larga escala, destas tecnologias de conversão de energia, também em equipamentos eléctricos residenciais e de escritórios. Tal como qualquer outra tecnologia de conversão electrónica de potência, os conversores CC–CC podem ver o seu funcionamento afectado por falhas que degradam o seu bom funcionamento, sendo que essas falhas acabam por afectar não apenas os conversores em si, mas também as cargas que alimentam, limitando assim o tempo de vida útil do conjunto conversor + carga. Desta forma, é fulcral localizar a origem da falha, para que possam ser adoptadas acções correctivas, capazes de limitar as consequências nefastas associadas à falha. Para responder a este desafio, esta tese contempla o desenvolvimento de soluções de conversão de energia CC–CC altamente eficientes e fiáveis, capazes de responder a requisitos impostos por um conjunto alargado de equipamentos frequentemente encontrados em habitações e escritórios. Com base nos perfis de consumo de energia eléctrica e nos requisitos impostos pelas cargas tipicamente utilizadas em habitações e escritórios, são estabelecidos três grupos distintos: iluminação através de díodos emissores de luz, carregamento de veículo eléctrico (VE) e aparelhos eléctricos em geral. Para cada grupo, é efectuada uma avaliação cuidadosa dos critérios a respeitar, sendo com base nesses critérios que será escolhida e investigada pelo menos uma topologia de conversor CC–CC. No total, são abordadas cinco topologias de conversores CC–CC distintas, sendo que os aspectos ligados ao diagnóstico de avarias e/ou tolerância a falhas são analisados com particular detalhe em duas dessas topologias. Inicialmente, são estabelecidos modelos matemáticos descritivos do comportamento das principais cargas consideradas no estudo – díodos emissores de luz e baterias de VEs – visando a análise teórica do funcionamento dos sistemas em estudo, suportada por simulações computacionais. Com base numa compilação de requisitos a ter em conta em cada aplicação – iluminação através de díodos emissores de luz, carregamento de veículo eléctrico (VE) e aparelhos eléctricos em geral – são estabelecidas considerações ligadas à escolha de cada topologia de conversor não isolado, no que respeita à sua arquitectura e estratégia de controlo. Visando o conhecimento aprofundado das duas topologias de conversor CC–CC alvo de particular enfoque neste trabalho – conversor entrelaçado elevador e conversor de entrada única e múltiplas saídas, tolerante a falhas – quer em funcionamento normal, quer em funcionamento em modo de falha, é avaliado o funcionamento de ambas as topologias na presença de falhas de circuito aberto nos semicondutores activos. Para o efeito, são monitorizados e analisados parâmetros úteis à percepção da forma como os modos de falha avaliados neste trabalho impactam o funcionamento de todo o sistema. Nesta fase, é obtida informação fundamental ao desenvolvimento de estratégias de diagnóstico de avarias, particularmente indicadas para avarias de circuito aberto nos semicondutores activos dos conversores em estudo. Com base na informação recolhida anteriormente, é apresentada uma nova estratégia de diagnóstico de avarias direccionada a conversores CC–CC elevadores entrelaçados utilizados em aparelhos eléctricos, em geral. Facilidade de implementação, rapidez e robustez contra falsos positivos são algumas das características que distinguem a estratégia proposta em relação ao estado da arte. A sua efectividade é confirmada com recurso a uma multiplicidade de cenários de funcionamento, implementados quer em ambiente de simulação, quer em contexto experimental. Por fim, é apresentada e avaliada uma gama alargada de estratégias de reconfiguração, que visam assegurar a tolerância a falhas das diversas topologias de conversores CC–CC em estudo. É desenvolvida uma estratégia de reconfiguração híbrida, direccionada ao conversor entrelaçado elevador, que combina múltiplas medidas de reconfiguração mais simples num único procedimento. Demonstra-se que a combinação de múltiplas estratégias de reconfiguração introduz melhorias substanciais no funcionamento do conversor ao longo do período pós-falha, ao mesmo tempo que assegura a manutenção da qualidade da energia à entrada e saída do conversor reconfigurado. Noutra frente, é apresentada e descrita uma arquitectura alternativa do conversor de entrada única e múltiplas saídas, com tolerância a falhas de circuito aberto. Através da configuração proposta, é possível manter o fornecimento de energia eléctrica a todas as saídas do conversor. Para tirar máximo proveito da tolerância a falhas do conversor de entrada única e múltiplas saídas, uma topologia de conversor indicada para sistemas residenciais de iluminação baseados em díodos emissores de luz, são apresentadas e avaliadas duas estratégias de reconfiguração do conversor, exclusivamente baseadas na adaptação do controlo aplicado ao conversor. Os resultados de simulação computacional e os resultados experimentais obtidos confirmam a efectividade das abordagens adoptadas, através da melhoria da qualidade da energia eléctrica fornecida às diversas saídas do conversor. São assim asseguradas condições essenciais ao funcionamento ininterrupto e estável dos sistemas de iluminação, já que a qualidade da energia eléctrica fornecida aos sistemas de iluminação tem impacto directo na qualidade da luz produzida. Por fim, e para aprimorar o conversor de entrada única e múltiplas saídas tolerante a falhas, no que respeita à sua robustez contra falhas em sensores, é apresentada uma estratégia de controlo de corrente que evita o recurso excessivo a sensores e, ao mesmo tempo, simplifica a estrutura de controlo do conversor. A estratégia apresentada é avaliada através de simulações computacionais. A abordagem apresentada assume vantagens em múltiplos domínios, sendo de destacar vantagens como a melhoria da fiabilidade de todo o sistema de iluminação (conversor + carga), os ganhos atingidos ao nível do rendimento, a redução do custo de implementação da solução, ou a simplificação da estrutura de controlo.This work was supported by the Portuguese Foundation for Science and Technology (FCT) under grant number SFRH/BD/131002/2017, co-funded by the Ministry of Science, Technology and Higher Education (MCTES), by the European Social Fund (FSE) through the ‘Programa Operacional Regional Centro’ (POR-Centro), and by the Human Capital Operational Programme (POCH)

Estudio del estado del arte de las lámparas de iluminación LED y su comportamiento armónico

Este trabajo de final de master ha estudiado el estado del arte de los sistemas de iluminación LED así como las diferentes topologías de los circuitos electrónicos que alimentan la cadena de LEDs de las lámparas con el objeto de conocer las corrientes consumidas por dichas lámparas, poder determinar su emisión de armónicos y analizar posteriormente su impacto en la red eléctrica

Investigación sobre la flexibilidad de la demanda en redes eléctricas inteligentes: control directo de cargas

In recent decades, the European Union has made decisive efforts to maintain its global leadership in renewable energies to meet climate change targets resulting from international agreements. There is a deliberate intention to reduce the usage of non-renewable energy sources and promote the exploitation of renewable generation at all levels as shown by energy production data within the Eurozone. The electricity sector illustrates a successful implementation of these energy policies: The electricity coming from combustible fuels was at historical lows in 2018, accounting for 83.6 % of the electricity generated from this source in 2008. By contrast, the pool of renewables reached almost 170 % of the 2008 production. Against this background, power systems worldwide are undergoing deep-seated changes due to the increasing penetration of these variable renewable energy sources and distributed energy resources that are intermittent and stochastic in nature. Under these conditions, achieving a continuous balance between generation and consumption becomes a challenge and may jeopardize the system stability, which points out the need of making the power system flexible enough as a response measure to this trend. This Ph.D. thesis researches one of the principal mechanisms providing flexibility to the power system: The demand-side management, seen from both the demand response and the energy efficiency perspectives. Power quality issues as a non-negligible part of energy efficiency are also addressed. To do so, several strategies have been deployed at a double level. In the residential sector, a direct load control strategy for smart appliances has been developed under a real-time pricing demand response scheme. This strategy seeks to minimize the daily cost of energy in presence of diverse energy resources and appliances. Furthermore, a spread spectrum technique has also been applied to mitigate the highfrequency distortion derived from the usage of LED technology lighting systems instead of traditional ones when energy efficiency needs to be improved. In the industrial sector, a load scheduling strategy to control the AC-AC power electronic converter in charge of supporting the electric-boosted glass melting furnaces has been developed. The benefit is two-fold: While it contributes to demand flexibility by shaving the peaks found under conventional control schemes, the power quality issues related to the emission of subharmonics are also kept to a minimum. Concerning the technologies, this Ph.D. thesis provides smart solutions, platforms, and devices to carry out these strategies: From the application of the internet of things paradigm to the development of the required electronics and the implementation of international standards within the energy industry.En las últimas décadas, la Unión Europea ha realizado esfuerzos decisivos para mantener su liderazgo mundial en energías renovables con el fin de cumplir los objetivos de cambio climático resultantes de los acuerdos internacionales. Muestra una intención deliberada de reducir el uso de fuentes de energía no renovable y promover la explotación de la generación renovable a todos los niveles, como demuestran los datos de producción de energía en la eurozona. El sector de la electricidad ilustra un caso de éxito de estas políticas energéticas: la electricidad procedente de combustibles fósiles estaba en mínimos históricos en 2018, representando el 83,6 % de la electricidad generada a partir de esta fuente en 2008; en cambio, el grupo de renovables alcanzó casi el 170 % de la producción de 2008. En este contexto, los sistemas eléctricos de todo el mundo están experimentando profundos cambios debido a la creciente penetración de estas fuentes de energía renovable y de recursos energéticos distribuidos que son de naturaleza variable, intermitente y estocástica. En estas condiciones, lograr un equilibrio continuo entre generación y consumo se convierte en un reto y puede poner en peligro la estabilidad del sistema, lo que señala la necesidad de flexibilizar el sistema eléctrico como medida de respuesta a esta tendencia. Esta tesis doctoral investiga uno de los principales mecanismos que proporcionan flexibilidad al sistema eléctrico: la gestión de la demanda vista tanto desde la perspectiva de la respuesta a la demanda como de la eficiencia energética. También se abordan los problemas de calidad de suministro entendidos como parte no despreciable de la eficiencia energética. Para ello, se han desplegado varias estrategias a un doble nivel. En el sector residencial, se ha desarrollado una estrategia basada en el control directo de cargas para los electrodomésticos inteligentes siguiendo un esquema de respuesta a la demanda con precios en tiempo real. Esta estrategia busca minimizar el coste diario de la energía en presencia de diversos recursos energéticos y electrodomésticos. Además, también se ha aplicado una técnica de espectro ensanchado para mitigar la distorsión de alta frecuencia derivada del uso de sistemas de iluminación con tecnología LED, empleados para la mejora de la eficiencia energética frente a las tecnologías convencionales. En el sector industrial, se ha desarrollado una estrategia de planificación de cargas para controlar el convertidor AC-AC de los hornos de fundición de vidrio con soporte eléctrico. El beneficio es doble: mientras que se contribuye a la flexibilidad de la demanda al eliminar los picos encontrados en los esquemas de control convencionales, también se reducen al mínimo los problemas de calidad de suministro relacionados con la emisión de subarmónicos. En cuanto a las tecnologías, esta tesis doctoral aporta soluciones, plataformas y dispositivos inteligentes para llevar a cabo estas estrategias: desde la aplicación del paradigma del internet de las cosas hasta el desarrollo de la electrónica necesaria y la implementación de estándares internacionales dentro de la industria energética

Estudio del estado del arte de las lámparas de iluminación LED y su comportamiento armónico

Este trabajo de final de master ha estudiado el estado del arte de los sistemas de iluminación LED así como las diferentes topologías de los circuitos electrónicos que alimentan la cadena de LEDs de las lámparas con el objeto de conocer las corrientes consumidas por dichas lámparas, poder determinar su emisión de armónicos y analizar posteriormente su impacto en la red eléctrica