Advanced InSAR atmospheric correction: MERIS/MODIS combination and stacked water vapour models

A major source of error for repeat-pass Interferometric Synthetic Aperture Radar (InSAR) is the phase delay in radio signal propagation through the atmosphere (especially the part due to tropospheric water vapour). Based on experience with the Global Positioning System (GPS)/Moderate Resolution Imaging Spectroradiometer (MODIS) integrated model and the Medium Resolution Imaging Spectrometer (MERIS) correction model, two new advanced InSAR water vapour correction models are demonstrated using both MERIS and MODIS data: (1) the MERIS/MODIS combination correction model (MMCC); and (2) the MERIS/MODIS stacked correction model (MMSC). The applications of both the MMCC and MMSC models to ENVISAT Advanced Synthetic Aperture Radar (ASAR) data over the Southern California Integrated GPS Network (SCIGN) region showed a significant reduction in water vapour effects on ASAR interferograms, with the root mean square (RMS) differences between GPS- and InSAR-derived range changes in the line-of-sight (LOS) direction decreasing from ,10mm before correction to ,5mm after correction, which is similar to the GPS/MODIS integrated and MERIS correction models. It is expected that these two advanced water vapour correction models can expand the application of MERIS and MODIS data for InSAR atmospheric correction. A simple but effective approach has been developed to destripe Terra MODIS images contaminated by radiometric calibration errors. Another two limiting factors on the MMCC and MMSC models have also been investigated in this paper: (1) the impact of the time difference between MODIS and SAR data; and (2) the frequency of cloud-free conditions at the global scale

River Run Off Measurement With SAR Along Track Interferometry

The paper summarizes the need for global space borne river run-off measurements. It reports about an airborne SAR experiment aimed to measure the surface velocity of the river Isar in Bavaria / Germany. The results from two different SAR techniques, including Along Track Interferometry (ATI) show good correspondence. Finally suggestions for further studies are given

Assessment of the potential of MERIS near-infrared water vapour products to correct ASAR interferometric measurements

Atmospheric water vapour is a major limitation for high precision Interferometric Synthetic Aperture Radar (InSAR) applications due to its significant impact on microwave signals. We propose a statistical criterion to test whether an independent water vapour product can reduce water vapour effects on InSAR interferograms, and assess the potential of the Medium Resolution Imaging Spectrometer (MERIS) near-infrared water vapour products for correcting Advanced SAR (ASAR) data. Spatio-temporal comparisons show c. 1.1mm agreement between MERIS and GPS/radiosonde water vapour products in terms of standard deviations. One major limitation with the use of MERIS water vapour products is the frequency of cloud free conditions. Our analysis indicates that in spite of the low global cloud free conditions (~25%), the frequency can be much higher for certain areas such as Eastern Tibet (~38%) and Southern California (~48%). This suggests that MERIS water vapour products show potential for correcting ASAR interferometric measurements in certain regions

Fundamental Radar Properties: Hidden Variables in Spacetime

A derivation of the properties of pulsed radiative imaging systems is presented with examples drawn from conventional, synthetic aperture, and interferometric radar. A geometric construction of the space and time components of a radar observation yields a simple underlying structural equivalence between many of the properties of radar, including resolution, range ambiguity, azimuth aliasing, signal strength, speckle, layover, Doppler shifts, obliquity and slant range resolution, finite antenna size, atmospheric delays, and beam and pulse limited configurations. The same simple structure is shown to account for many interferometric properties of radar - height resolution, image decorrelation, surface velocity detection, and surface deformation measurement. What emerges is a simple, unified description of the complex phenomena of radar observations. The formulation comes from fundamental physical concepts in relativistic field theory, of which the essential elements are presented. In the terminology of physics, radar properties are projections of hidden variables - curved worldlines from a broken symmetry in Minkowski spacetime - onto a time-serial receiver.Comment: 24 pages, 18 figures Accepted JOSA-

Real-time national GPS networks: Opportunities for atmospheric sensing

Real-time national Global Positioning System (GPS) networks are being established in a number of countries for atmospheric sensing. UCAR, in collaboration with participating universities, is developing one of these networks in the United States. The network, named "SuomiNet" to honor meteorological satellite pioneer Verner Suomi, is funded by the U.S. National Science Foundation. SuomiNet will exploit the recently-shown ability of ground-based GPS receivers to make thousands of accurate upper and lower atmospheric measurements per day. Phase delays induced in GPS signals by the ionosphere and neutral atmosphere can be measured with high precision simultaneously along up to a dozen GPS ray paths in the field of view. These delays can be converted into total electron content (TEC), and integrated water vapor (if surface pressure data or estimates are available), along each GPS ray path. The resulting continuous, accurate, all-weather, real-time upper and lower atmospheric data create a variety of opportunities for atmospheric research. In this letter we describe SuomiNet, its applications, and the opportunity to coordinate national real-time GPS networks to create, a global network with larger scientific and operational potential. Copy right© The Society of Geomagnetism and Earth, Planetary and Space Sciences (SGEPSS); The Seismological Society of Japan; The Volcanological Society of Japan; The Geodetic Society of Japan; The Japanese Society for Planetary Sciences

Improving InSAR geodesy using global atmospheric models

Spatial and temporal variations of pressure, temperature and water vapor content in the atmosphere introduce significant confounding delays in Interferometric Synthetic Aperture Radar (InSAR) observations of ground deformation and bias estimatesof regional strain rates. Producing robust estimates of tropospheric delays remains one of the key challenges in increasing the accuracy of ground deformation measurements using InSAR. Recent studies revealed the efficiency of global atmospheric reanalysis to mitigate the impact of tropospheric delays, motivating further exploration of their potential. Here, we explore the effectiveness of these models in several geographic and tectonic settings on both single interferograms and time series analysis products. Both hydrostatic and wet contributions to the phase delay are important to account for. We validate these path delay corrections by comparing with estimates of vertically integrated atmospheric water vapor content derived from the passive multi-spectral imager MERIS, onboard the ENVISAT satellite. Generally, the performance of the prediction depends on the vigor of atmospheric turbulence. We discuss (1) how separating atmospheric and orbital contributions allows one to better measure long wavelength deformation, (2) how atmospheric delays affect measurements of surface deformation following earthquakes and (3) we show that such a method allows us to reduce biases in multi-year strain rate estimates by reducing the influence of unevenly sampled seasonal oscillations of the tropospheric delay

Millimeter-wave aperture synthesis radiometry for snow and ice mapping

An outline design for a dual-band mm-wave polarimetric SAIR has been presented and is considered to be tractable. The envisaged application is for snow and ice mapping and ocean wind vector measurement. The vastly increased complexity of the high-frequency waveband may not be justified by the scientific benefit and operation at an additional lower frequency such as 18 GHz may give improved classification, though with reduced spatial resolution. The authors describe the outline design for a polarimetric, mm-wave SAIR. One-dimensional aperture synthesis employs a hybrid technique in which a long linear array of real-aperture stick antennas form over-lapping fan beams on the ground and aperture synthesis within the fan beams enables synthesis of the mm-wave image. Critical aspects for building a high-resolution, mm-wave ESTAR are system calibration and the construction of stick antennas that will be 3 m long and about half a wavelength wide.Peer ReviewedPostprint (published version

Minimizing the residual topography effect on interferograms to improve DInSAR results: estimating land subsidence in Port-Said City, Egypt

The accurate detection of land subsidence rates in urban areas is important to identify damage-prone areas and provide decision-makers with useful information. Meanwhile, no precise measurements of land subsidence have been undertaken within the coastal Port-Said City in Egypt to evaluate its hazard in relationship to sea-level rise. In order to address this shortcoming, this work introduces and evaluates a methodology that substantially improves small subsidence rate estimations in an urban setting. Eight ALOS/PALSAR-1 scenes were used to estimate the land subsidence rates in Port-Said City, using the Small BAse line Subset (SBAS) DInSAR technique. A stereo pair of ALOS/PRISM was used to generate an accurate DEM to minimize the residual topography effect on the generated interferograms. A total of 347 well distributed ground control points (GCP) were collected in Port-Said City using the leveling instrument to calibrate the generated DEM. Moreover, the eight PALSAR scenes were co-registered using 50 well-distributed GCPs and used to generate 22 interferogram pairs. These PALSAR interferograms were subsequently filtered and used together with the coherence data to calculate the phase unwrapping. The phase-unwrapped interferogram-pairs were then evaluated to discard four interferograms that were affected by phase jumps and phase ramps. Results confirmed that using an accurate DEM (ALOS/PRISM) was essential for accurately detecting small deformations. The vertical displacement rate during the investigated period (2007–2010) was estimated to be −28 mm. The results further indicate that the northern area of Port-Said City has been subjected to higher land subsidence rates compared to the southern area. Such land subsidence rates might induce significant environmental changes with respect to sea-level rise