Cooperative Virtual Sensor for Fault Detection and Identification in Multi-UAV Applications

This paper considers the problem of fault detection and identification (FDI) in applications carried out by a group of unmanned aerial vehicles (UAVs) with visual cameras. In many cases, the UAVs have cameras mounted onboard for other applications, and these cameras can be used as bearing-only sensors to estimate the relative orientation of another UAV. The idea is to exploit the redundant information provided by these sensors onboard each of the UAVs to increase safety and reliability, detecting faults on UAV internal sensors that cannot be detected by the UAVs themselves. Fault detection is based on the generation of residuals which compare the expected position of a UAV, considered as target, with the measurements taken by one or more UAVs acting as observers that are tracking the target UAV with their cameras. Depending on the available number of observers and the way they are used, a set of strategies and policies for fault detection are defined. When the target UAV is being visually tracked by two or more observers, it is possible to obtain an estimation of its 3D position that could replace damaged sensors. Accuracy and reliability of this vision-based cooperative virtual sensor (CVS) have been evaluated experimentally in a multivehicle indoor testbed with quadrotors, injecting faults on data to validate the proposed fault detection methods.Comisión Europea H2020 644271Comisión Europea FP7 288082Ministerio de Economia, Industria y Competitividad DPI2015-71524-RMinisterio de Economia, Industria y Competitividad DPI2014-5983-C2-1-RMinisterio de Educación, Cultura y Deporte FP

Multi-bot Easy Control Hierarchy

The goal of our project is to create a software architecture that makes it possible to easily control a multi-robot system, as well as seamlessly change control modes during operation. The different control schemes first include the ability to implement on-board and off-board controllers. Second, the commands can specify either actuator level, vehicle level, or fleet level behavior. Finally, motion can be specified by giving a waypoint and time constraint, a velocity and heading, or a throttle and angle. Our code is abstracted so that any type of robot - ranging from ones that use a differential drive set up, to three-wheeled holonomic platforms, to quadcopters - can be added to the system by simply writing drivers that interface with the hardware used and by implementing math packages that do the required calculations. Our team has successfully demonstrated piloting a single robots while switching between waypoint navigation and a joystick controller. In addition, we have demonstrated the synchronized control of two robots using joystick control. Future work includes implementing a more robust cluster control, including off-board functionality, and incorporating our architecture into different types of robots

Biologically inspired learning system

Learning Systems used on robots require either a-priori knowledge in the form of models, rules of thumb or databases or require that robot to physically execute multitudes of trial solutions. The first requirement limits the robot’s ability to operate in unstructured changing environments, and the second limits the robot’s service life and resources. In this research a generalized approach to learning was developed through a series of algorithms that can be used for construction of behaviors that are able to cope with unstructured environments through adaptation of both internal parameters and system structure as a result of a goal based supervisory mechanism. Four main learning algorithms have been developed, along with a goal directed random exploration routine. These algorithms all use the concept of learning from a recent memory in order to save the robot/agent from having to exhaustively execute all trial solutions. The first algorithm is a reactive online learning algorithm that uses a supervised learning to find the sensor/action combinations that promote realization of a preprogrammed goal. It produces a feed forward neural network controller that is used to control the robot. The second algorithm is similar to first in that it uses a supervised learning strategy, but it produces a neural network that considers past values, thus providing a non-reactive solution. The third algorithm is a departure from the first two in that uses a non-supervised learning technique to learn the best actions for each situation the robot encounters. The last algorithm builds a graph of the situations encountered by agent/robot in order to learn to associate the best actions with sensor inputs. It uses an unsupervised learning approach based on shortest paths to a goal situation in the graph in order to generate a non-reactive feed forward neural network. Test results were good, the first and third algorithms were tested in a formation maneuvering task in both simulation and onboard mobile robots, while the second and fourth were tested simulation

Design and Development of an Integrated Mobile Robot System for Use in Simple Formations

In recent years, formation control of autonomous unmanned vehicles has become an active area of research with its many broad applications in areas such as transportation and surveillance. The work presented in this thesis involves the design and implementation of small unmanned ground vehicles to be used in leader-follower formations. This mechatronics project involves breadth in areas of mechanical, electrical, and computer engineering design. A vehicle with a unicycle-type drive mechanism is designed in 3D CAD software and manufactured using 3D printing capabilities. The vehicle is then modeled using the unicycle kinematic equations of motion and simulated in MATLAB/Simulink. Simple motion tasks are then performed onboard the vehicle utilizing the vehicle model via software, and leader-follower formations are implemented with multiple vehicles

A survey on fractional order control techniques for unmanned aerial and ground vehicles

In recent years, numerous applications of science and engineering for modeling and control of unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) systems based on fractional calculus have been realized. The extra fractional order derivative terms allow to optimizing the performance of the systems. The review presented in this paper focuses on the control problems of the UAVs and UGVs that have been addressed by the fractional order techniques over the last decade

Aerial Vehicles

This book contains 35 chapters written by experts in developing techniques for making aerial vehicles more intelligent, more reliable, more flexible in use, and safer in operation.It will also serve as an inspiration for further improvement of the design and application of aeral vehicles. The advanced techniques and research described here may also be applicable to other high-tech areas such as robotics, avionics, vetronics, and space