Robust observer-based output feedback control for fuzzy descriptor systems

[[abstract]]This paper proposes a robust observer-based output feedback control for fuzzy descriptor systems. First, we represent singular nonlinear dynamic system into Takagi–Sugeno (T–S) fuzzy descriptor model which have a tighter representation for a wider class of nonlinear systems in comparison to general state-space models. To achieve the control objective, we design a fuzzy controller and observer in a unified and systematic manner. The stability analysis of the overall closed-loop fuzzy system leads to formulation of linear matrix inequalities (LMIs). The advantages of the approach are three fold. First, we consider conditions of immeasurable states which allows a practical design of sensorless control systems. Secondly, we address the robustness issue in the system which avoids control performance deterioration or instability due to disturbance or approximation errors in the system. Third, we formulate the overall control problem into LMIs. Using the observer and controller gains by solving LMIs, we carry out numerical simulations which verify theoretical statements.[[incitationindex]]SCI[[booktype]]紙本[[booktype]]電子

Observer-Based Fuzzy Integral Sliding Mode Control For Nonlinear Descriptor Systems

This paper investigates observer-based stabilization for nonlinear descriptor systems using a fuzzy integral sliding mode control approach. Observer-based integral sliding mode control strategies for the T-S fuzzy descriptor systems are developed. A two step design is ?rst developed to obtain the observer gains and coef?cients in the switching function using linear matrix inequalities, and the results are used to facilitate the development of a single step design approach, which is seen to be convenient but introduces some conservatism in the design. The potential application to a class of mechanical systems is also considered. Since the descriptor system representation of mechanical systems is adopted, it is shown that in contrast to the existing fuzzy sliding mode control methods based on the normal system representation, the resulting T-S fuzzy system does not contain different input matrices for each local subsystem and the required number of fuzzy rules is consequently markedly reduced. Finally, the balancing problem of a pendulum on a car is numerically simulated to demonstrate the effectiveness of the proposed method

A review of convex approaches for control, observation and safety of linear parameter varying and Takagi-Sugeno systems

This paper provides a review about the concept of convex systems based on Takagi-Sugeno, linear parameter varying (LPV) and quasi-LPV modeling. These paradigms are capable of hiding the nonlinearities by means of an equivalent description which uses a set of linear models interpolated by appropriately defined weighing functions. Convex systems have become very popular since they allow applying extended linear techniques based on linear matrix inequalities (LMIs) to complex nonlinear systems. This survey aims at providing the reader with a significant overview of the existing LMI-based techniques for convex systems in the fields of control, observation and safety. Firstly, a detailed review of stability, feedback, tracking and model predictive control (MPC) convex controllers is considered. Secondly, the problem of state estimation is addressed through the design of proportional, proportional-integral, unknown input and descriptor observers. Finally, safety of convex systems is discussed by describing popular techniques for fault diagnosis and fault tolerant control (FTC).Peer ReviewedPostprint (published version

Fault estimation and active fault tolerant control for linear parameter varying descriptor systems

Starting with the baseline controller design, this paper proposes an integrated approach of active fault tolerant control based on proportional derivative extended state observer (PDESO) for linear parameter varying descriptor systems. The PDESO can simultaneously provide the estimates of the system states, sensor faults, and actuator faults. The L₂ robust performance of the closed-loop system to bounded exogenous disturbance and bounded uncertainty is achieved by a two-step design procedure adapted from the traditional observer-based controller design. Furthermore, an LMI pole-placement region and the L₂ robustness performance are combined into a multiobjective formulation by suitably combing the appropriate LMI descriptions. A parameter-varying system example is given to illustrate the design procedure and the validity of the proposed integrated design approach

Mathematical control of complex systems

Copyright © 2013 ZidongWang et al.This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited

Zonotopic fault detection observer design for Takagi–Sugeno fuzzy systems

This paper considers zonotopic fault detection observer design in the finite-frequency domain for discrete-time Takagi–Sugeno fuzzy systems with unknown but bounded disturbances and measurement noise. We present a novel fault detection observer structure, which is more general than the commonly used Luenberger form. To make the generated residual sensitive to faults and robust against disturbances, we develop a finite-frequency fault detection observer based on generalised Kalman–Yakubovich–Popov lemma and P-radius criterion. The design conditions are expressed in terms of linear matrix inequalities. The major merit of the proposed method is that residual evaluation can be easily implemented via zonotopic approach. Numerical examples are conducted to demonstrate the proposed methodPeer ReviewedPostprint (author's final draft

Observer Design for a Class of Nonlinear Descriptor Systems: A Takagi-Sugeno Approach with Unmeasurable Premise Variables

The Takagi-Sugeno (T-S) fuzzy observer for dynamical systems described by ordinary differential equations is widely discussed in the literature. The aim of this paper is to extend this observer design to a class of T-S descriptor systems with unmeasurable premise variables. In practice, the computation of solutions of differential-algebraic equations requires the combination of an ordinary differential equations (ODE) routine together with an optimization algorithm. Therefore, a natural way permitting to estimate the state of such a system is to design a procedure based on a similar numerical algorithm. Beside some numerical difficulties, the drawback of such a method lies in the fact that it is not easy to establish a rigorous proof of the convergence of the observer. The main result of this paper consists in showing that the state estimation problem for a class of T-S descriptor systems can be achieved by using a fuzzy observer having only an ODE structure. The convergence of the state estimation error is studied using the Lyapunov theory and the stability conditions are given in terms of linear matrix inequalities (LMIs). Finally, an application to a model of a heat exchanger pilot process is given to illustrate the performance of the proposed observer

H ∞ sliding mode observer design for a class of nonlinear discrete time-delay systems: A delay-fractioning approach

Copyright @ 2012 John Wiley & SonsIn this paper, the H ∞  sliding mode observer (SMO) design problem is investigated for a class of nonlinear discrete time-delay systems. The nonlinear descriptions quantify the maximum possible derivations from a linear model, and the system states are allowed to be immeasurable. Attention is focused on the design of a discrete-time SMO such that the asymptotic stability as well as the H ∞  performance requirement of the error dynamics can be guaranteed in the presence of nonlinearities, time delay and external disturbances. Firstly, a discrete-time discontinuous switched term is proposed to make sure that the reaching condition holds. Then, by constructing a new Lyapunov–Krasovskii functional based on the idea of ‘delay fractioning’ and by introducing some appropriate free-weighting matrices, a sufficient condition is established to guarantee the desired performance of the error dynamics in the specified sliding mode surface by solving a minimization problem. Finally, an illustrative example is given to show the effectiveness of the designed SMO design scheme