Intuitive Hand Teleoperation by Novice Operators Using a Continuous Teleoperation Subspace

Human-in-the-loop manipulation is useful in when autonomous grasping is not able to deal sufficiently well with corner cases or cannot operate fast enough. Using the teleoperator's hand as an input device can provide an intuitive control method but requires mapping between pose spaces which may not be similar. We propose a low-dimensional and continuous teleoperation subspace which can be used as an intermediary for mapping between different hand pose spaces. We present an algorithm to project between pose space and teleoperation subspace. We use a non-anthropomorphic robot to experimentally prove that it is possible for teleoperation subspaces to effectively and intuitively enable teleoperation. In experiments, novice users completed pick and place tasks significantly faster using teleoperation subspace mapping than they did using state of the art teleoperation methods.Comment: ICRA 2018, 7 pages, 7 figures, 2 table

Learn and Transfer Knowledge of Preferred Assistance Strategies in Semi-autonomous Telemanipulation

Enabling robots to provide effective assistance yet still accommodating the operator's commands for telemanipulation of an object is very challenging because robot's assistive action is not always intuitive for human operators and human behaviors and preferences are sometimes ambiguous for the robot to interpret. Although various assistance approaches are being developed to improve the control quality from different optimization perspectives, the problem still remains in determining the appropriate approach that satisfies the fine motion constraints for the telemanipulation task and preference of the operator. To address these problems, we developed a novel preference-aware assistance knowledge learning approach. An assistance preference model learns what assistance is preferred by a human, and a stagewise model updating method ensures the learning stability while dealing with the ambiguity of human preference data. Such a preference-aware assistance knowledge enables a teleoperated robot hand to provide more active yet preferred assistance toward manipulation success. We also developed knowledge transfer methods to transfer the preference knowledge across different robot hand structures to avoid extensive robot-specific training. Experiments to telemanipulate a 3-finger hand and 2-finger hand, respectively, to use, move, and hand over a cup have been conducted. Results demonstrated that the methods enabled the robots to effectively learn the preference knowledge and allowed knowledge transfer between robots with less training effort

Human to robot hand motion mapping methods: review and classification

In this article, the variety of approaches proposed in literature to address the problem of mapping human to robot hand motions are summarized and discussed. We particularly attempt to organize under macro-categories the great quantity of presented methods, that are often difficult to be seen from a general point of view due to different fields of application, specific use of algorithms, terminology and declared goals of the mappings. Firstly, a brief historical overview is reported, in order to provide a look on the emergence of the human to robot hand mapping problem as a both conceptual and analytical challenge that is still open nowadays. Thereafter, the survey mainly focuses on a classification of modern mapping methods under six categories: direct joint, direct Cartesian, taskoriented, dimensionality reduction based, pose recognition based and hybrid mappings. For each of these categories, the general view that associates the related reported studies is provided, and representative references are highlighted. Finally, a concluding discussion along with the authors’ point of view regarding future desirable trends are reported.This work was supported in part by the European Commission’s Horizon 2020 Framework Programme with the project REMODEL under Grant 870133 and in part by the Spanish Government under Grant PID2020-114819GB-I00.Peer ReviewedPostprint (published version

Human-Robot Team Interaction Through Wearable Haptics for Cooperative Manipulation

The interaction of robot teams and single human in teleoperation scenarios is beneficial in cooperative tasks, for example the manipulation of heavy and large objects in remote or dangerous environments. The main control challenge of the interaction is its asymmetry, arising because robot teams have a relatively high number of controllable degrees of freedom compared to the human operator. Therefore, we propose a control scheme that establishes the interaction on spaces of reduced dimensionality taking into account the low number of human command and feedback signals imposed by haptic devices. We evaluate the suitability of wearable haptic fingertip devices for multi-contact teleoperation in a user study. The results show that the proposed control approach is appropriate for human-robot team interaction and that the wearable haptic fingertip devices provide suitable assistance in cooperative manipulation tasks

Passivity-Based adaptive bilateral teleoperation control for uncertain manipulators without jerk measurements

In this work, we consider the bilateral teleoperation problem of cooperative robotic systems in a Single-Master Multi-Slave (SM/MS) configuration, which is able to perform load transportation tasks in the presence of parametric uncertainty in the robot kinematic and dynamic models. The teleoperation architecture is based on the two-layer approach placed in a hierarchical structure, whose top and bottom layers are responsible for ensuring the transparency and stability properties respectively. The load transportation problem is tackled by using the formation control approach wherein the desired translational velocity and interaction force are provided to the master robot by the user, while the object is manipulated with a bounded constant force by the slave robots. Firstly, we develop an adaptive kinematic-based control scheme based on a composite adaptation law to solve the cooperative control problem for robots with uncertain kinematics. Secondly, the dynamic adaptive control for cooperative robots is implemented by means of a cascade control strategy, which does not require the measurement of the time derivative of force (which requires jerk measurements). The combination of the Lyapunov stability theory and the passivity formalism are used to establish the stability and convergence property of the closed-loop control system. Simulations and experimental results illustrate the performance and feasibility of the proposed control scheme.No presente trabalho, considera-se o problema de teleoperação bilateral de um sistema robótico cooperativo do tipo single-master e multiple-slaves (SM/MS) capaz de realizar tarefas de transporte de carga na presença de incertezas paramétricas no modelo cinemático e dinâmico dos robôs. A arquitetura de teleoperação está baseada na abordagem de duas camadas em estrutura hierárquica, onde as camadas superior e inferior são responsáveis por assegurar as propriedades de transparência e estabilidade respectivamente. O problema de transporte de carga é formulado usando a abordagem de controle de formação onde a velocidade de translação desejada e a força de interação são fornecidas ao robô mestre pelo operador, enquanto o objeto é manipulado pelos robôs escravos com uma força constante limitada. Primeiramente, desenvolve-se um esquema de controle adaptativo cinemático baseado em uma lei de adaptação composta para solucionar o problema de controle cooperativo de robôs com cinemática incerta. Em seguida, o controle adaptativo dinâmico de robôs cooperativos é implementado por meio de uma estratégia de controle em cascata, que não requer a medição da derivada da força (o qual requer a derivada da aceleração ou jerk). A teoria de estabilidade de Lyapunov e o formalismo de passividade são usados para estabelecer as propriedades de estabilidade e a convergência do sistema de controle em malha-fechada. Resultados de simulações numéricas ilustram o desempenho e viabilidade da estratégia de controle proposta

A Cartesian Space Approach to Teleoperate a Slave Robot with a Kinematically Dissimilar Redundant Manipulator

Due to the inability of humans to interact with certain unstructured environments,telemanipulation of robots have gained immense importance. One of the primary tasks in telemanipulating robots remotely, is the effective manipulation of the slave robot using the master manipulator. Ideally a kinematic replica of the slave manipulator is used as the master to provide a joint-to-joint control to the slave. This research uses the 7-DOF Whole Arm Manipulator© (WAM) as the master manipulator and a 6-DOF Titan as the slave manipulator. Due to the kinematic dissimilarity between the two, a Cartesian space position mapping technique is adapted in which the slave is made to follow the same trajectory as the end effector of the master with respect to its reference frame. The main criterion in undertaking this mapping approach is to provide a convenient region of operation to the human operator. Various methods like pseudo inverse, Jacobian transpose and Damped least squares have been used to perform the inverse kinematics for the Titan. Joint limit avoidance and obstacle avoidance constraints were used to perform the inverse kinematics for the WAM and thereby remove the redundancy. Finally a joint volume limitation constraint (JVLC) was adopted which aims at providing the operator, a comfortable operational space in union with the master manipulator. Each inverse methodfor the Titan was experimentally tested and the best method identified from thesimulation results and the error analysis. Various experiments were also performed for the constrained inverse kinematics for the WAM and results were simulated. RoboWorks© was used for simulation purposes

Realistic tool-tissue interaction models for surgical simulation and planning

Surgical simulators present a safe and potentially effective method for surgical training, and can also be used in pre- and intra-operative surgical planning. Realistic modeling of medical interventions involving tool-tissue interactions has been considered to be a key requirement in the development of high-fidelity simulators and planners. The soft-tissue constitutive laws, organ geometry and boundary conditions imposed by the connective tissues surrounding the organ, and the shape of the surgical tool interacting with the organ are some of the factors that govern the accuracy of medical intervention planning.\ud \ud This thesis is divided into three parts. First, we compare the accuracy of linear and nonlinear constitutive laws for tissue. An important consequence of nonlinear models is the Poynting effect, in which shearing of tissue results in normal force; this effect is not seen in a linear elastic model. The magnitude of the normal force for myocardial tissue is shown to be larger than the human contact force discrimination threshold. Further, in order to investigate and quantify the role of the Poynting effect on material discrimination, we perform a multidimensional scaling study. Second, we consider the effects of organ geometry and boundary constraints in needle path planning. Using medical images and tissue mechanical properties, we develop a model of the prostate and surrounding organs. We show that, for needle procedures such as biopsy or brachytherapy, organ geometry and boundary constraints have more impact on target motion than tissue material parameters. Finally, we investigate the effects surgical tool shape on the accuracy of medical intervention planning. We consider the specific case of robotic needle steering, in which asymmetry of a bevel-tip needle results in the needle naturally bending when it is inserted into soft tissue. We present an analytical and finite element (FE) model for the loads developed at the bevel tip during needle-tissue interaction. The analytical model explains trends observed in the experiments. We incorporated physical parameters (rupture toughness and nonlinear material elasticity) into the FE model that included both contact and cohesive zone models to simulate tissue cleavage. The model shows that the tip forces are sensitive to the rupture toughness. In order to model the mechanics of deflection of the needle, we use an energy-based formulation that incorporates tissue-specific parameters such as rupture toughness, nonlinear material elasticity, and interaction stiffness, and needle geometric and material properties. Simulation results follow similar trends (deflection and radius of curvature) to those observed in macroscopic experimental studies of a robot-driven needle interacting with gels

Haptic Device Design and Teleoperation Control Algorithms for Mobile Manipulators

The increasing need of teleoperated robotic systems implies more and more often to use, as slave devices, mobile platforms (terrestrial, aerial or underwater) with integrated manipulation capabilities, provided e.g. by robotic arms with proper grasping/manipulation tools. Despite this, the research activity in teleoperation of robotic systems has mainly focused on the control of either fixed-base manipulators or mobile robots, non considering the integration of these two types of systems in a single device. Such a combined robotic devices are usually referred to as mobile manipulators: systems composed by both a robotic manipulator and a mobile platform (on which the arm is mounted) whose purpose is to enlarge the manipulator’s workspace. The combination of a mobile platform and a serial manipulator creates redundancy: a particular point in the space can be reached by moving the manipulator, by moving the mobile platform, or by a combined motion of both. A synchronized motion of both devices need then to be addressed. Although specific haptic devices explicitly oriented to the control of mobile manipulators need to be designed, there are no commercial solution yet. For this reason it is often necessary to control such as combined systems with traditional haptic devices not specifically oriented to the control of mobile manipulators. The research activity presented in this Ph.D. thesis focuses in the first place on the design of a teleoperation control scheme which allows the simultaneous control of both the manipulator and the mobile platform by means of a single haptic device characterized by fixed base and an open kinematic chain. Secondly the design of a novel cable-drive haptic devices has been faced. Investigating the use of twisted strings actuation in force rendering is the most interesting challenge of the latter activity