Wireless Accelerometer for Neonatal MRI Motion Artifact Correction

A wireless accelerometer has been used in conjunction with a dedicated 3T neonatal MRI system installed on a Neonatal Intensive Care Unit to measure in-plane rotation which is a common problem with neonatal MRI. Rotational data has been acquired in real-time from phantoms simultaneously with MR images which shows that the wireless accelerometer can be used in close proximity to the MR system. No artifacts were observed on the MR images from the accelerometer or from the MR system on the accelerometer output. Initial attempts to correct the raw data using the measured rotational angles have been performed, but further work will be required to make a robust correction algorithm

FireFly Mosaic: A Vision-Enabled Wireless Sensor Networking System

Abstract — With the advent of CMOS cameras, it is now possible to make compact, cheap and low-power image sensors capable of on-board image processing. These embedded vision sensors provide a rich new sensing modality enabling new classes of wireless sensor networking applications. In order to build these applications, system designers need to overcome challanges associated with limited bandwith, limited power, group coordination and fusing of multiple camera views with various other sensory inputs. Real-time properties must be upheld if multiple vision sensors are to process data, com-municate with each other and make a group decision before the measured environmental feature changes. In this paper, we present FireFly Mosaic, a wireless sensor network image processing framework with operating system, networking and image processing primitives that assist in the development of distributed vision-sensing tasks. Each FireFly Mosaic wireless camera consists of a FireFly [1] node coupled with a CMUcam3 [2] embedded vision processor. The FireFly nodes run the Nano-RK [3] real-time operating system and communicate using the RT-Link [4] collision-free TDMA link protocol. Using FireFly Mosaic, we demonstrate an assisted living application capable of fusing multiple cameras with overlapping views to discover and monitor daily activities in a home. Using this application, we show how an integrated platform with support for time synchronization, a collision-free TDMA link layer, an underlying RTOS and an interface to an embedded vision sensor provides a stable framework for distributed real-time vision processing. To the best of our knowledge, this is the first wireless sensor networking system to integrate multiple coordinating cameras performing local processing. I

Human mobility monitoring in very low resolution visual sensor network

This paper proposes an automated system for monitoring mobility patterns using a network of very low resolution visual sensors (30 30 pixels). The use of very low resolution sensors reduces privacy concern, cost, computation requirement and power consumption. The core of our proposed system is a robust people tracker that uses low resolution videos provided by the visual sensor network. The distributed processing architecture of our tracking system allows all image processing tasks to be done on the digital signal controller in each visual sensor. In this paper, we experimentally show that reliable tracking of people is possible using very low resolution imagery. We also compare the performance of our tracker against a state-of-the-art tracking method and show that our method outperforms. Moreover, the mobility statistics of tracks such as total distance traveled and average speed derived from trajectories are compared with those derived from ground truth given by Ultra-Wide Band sensors. The results of this comparison show that the trajectories from our system are accurate enough to obtain useful mobility statistics

Non-Linear Model Predictive Control with Adaptive Time-Mesh Refinement

In this paper, we present a novel solution for real-time, Non-Linear Model Predictive Control (NMPC) exploiting a time-mesh refinement strategy. The proposed controller formulates the Optimal Control Problem (OCP) in terms of flat outputs over an adaptive lattice. In common approximated OCP solutions, the number of discretization points composing the lattice represents a critical upper bound for real-time applications. The proposed NMPC-based technique refines the initially uniform time horizon by adding time steps with a sampling criterion that aims to reduce the discretization error. This enables a higher accuracy in the initial part of the receding horizon, which is more relevant to NMPC, while keeping bounded the number of discretization points. By combining this feature with an efficient Least Square formulation, our solver is also extremely time-efficient, generating trajectories of multiple seconds within only a few milliseconds. The performance of the proposed approach has been validated in a high fidelity simulation environment, by using an UAV platform. We also released our implementation as open source C++ code.Comment: In: 2018 IEEE International Conference on Simulation, Modeling, and Programming for Autonomous Robots (SIMPAR 2018

Sensor Signal and Information Processing II [Editorial]

This Special Issue compiles a set of innovative developments on the use of sensor signals and information processing. In particular, these contributions report original studies on a wide variety of sensor signals including wireless communication, machinery, ultrasound, imaging, and internet data, and information processing methodologies such as deep learning, machine learning, compressive sensing, and variational Bayesian. All these devices have one point in common: These algorithms have incorporated some form of computational intelligence as part of their core framework in problem solving. They have the capacity to generalize and discover knowledge for themselves, learning to learn new information whenever unseen data are captured