Robotic weld groove scanning for large tubular T-joints using a line laser sensor

This paper presents a novel procedure for robotic scanning of weld grooves in large tubular T-joints. The procedure is designed to record the discrete weld groove scans using a commercially available line laser scanner which is attached to the robot end-effector. The advantage of the proposed algorithm is that it does not require any prior knowledge of the joint interface geometry, while only two initial scanning positions have to be specified. The position and orientation of the following scan are calculated using the data from two previous weld groove scans, so once initiated, the scanning process is fully autonomous. The procedure is a two-step algorithm consisting of the prediction and correction substeps, where the position and orientation of the sensor for the following scan are predicted and corrected. Such a procedure does not require frequent weld groove scanning for navigation along the groove. The performance of the proposed procedure is studied experimentally using an industrial-size T-joint specimen. Several cases of scanning motion parameters have been tested, and a discussion on the results is given.publishedVersio

Automated geometry measurement and deep rolling of butt welds

During the joining of two metal sheets by welding, a process-specific geometry of the weld is created. The local geometry of the created weld has a decisive influence on its fatigue strength. This is due to stress concentration at the geometric notches. In this paper, a process known from mechanical engineering called deep rolling is applied on butt welds. The influence on the local weld geometry and the local stress concentration after deep rolling is investigated. Additionally, a novel automated measurement system using optical laser line scanning is presented. The system is qualified for the evaluation of the local weld geometry regarding its flank angles and toe radii. The presented investigations show that the deep rolling process influences the stress concentrations determined by 2D-FE-simulations using real scan data. A correlation between the difference in toe radii or local notch stresses before and after deep rolling and the initial flank angle was found. This indicates that there are process and geometry specific conditions for the successful application of the deep rolling process

Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021

This Open Access proceedings presents a good overview of the current research landscape of assembly, handling and industrial robotics. The objective of MHI Colloquium is the successful networking at both academic and management level. Thereby, the colloquium focuses an academic exchange at a high level in order to distribute the obtained research results, to determine synergy effects and trends, to connect the actors in person and in conclusion, to strengthen the research field as well as the MHI community. In addition, there is the possibility to become acquatined with the organizing institute. Primary audience is formed by members of the scientific society for assembly, handling and industrial robotics (WGMHI)

Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021

This Open Access proceedings presents a good overview of the current research landscape of assembly, handling and industrial robotics. The objective of MHI Colloquium is the successful networking at both academic and management level. Thereby, the colloquium focuses an academic exchange at a high level in order to distribute the obtained research results, to determine synergy effects and trends, to connect the actors in person and in conclusion, to strengthen the research field as well as the MHI community. In addition, there is the possibility to become acquatined with the organizing institute. Primary audience is formed by members of the scientific society for assembly, handling and industrial robotics (WGMHI)

Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021

This Open Access proceedings presents a good overview of the current research landscape of assembly, handling and industrial robotics. The objective of MHI Colloquium is the successful networking at both academic and management level. Thereby, the colloquium focuses an academic exchange at a high level in order to distribute the obtained research results, to determine synergy effects and trends, to connect the actors in person and in conclusion, to strengthen the research field as well as the MHI community. In addition, there is the possibility to become acquatined with the organizing institute. Primary audience is formed by members of the scientific society for assembly, handling and industrial robotics (WGMHI)

Annals of Scientific Society for Assembly, Handling and Industrial Robotics

This Open Access proceedings present a good overview of the current research landscape of industrial robots. The objective of MHI Colloquium is a successful networking at academic and management level. Thereby the colloquium is focussing on a high level academic exchange to distribute the obtained research results, determine synergetic effects and trends, connect the actors personally and in conclusion strengthen the research field as well as the MHI community. Additionally there is the possibility to become acquainted with the organizing institute. Primary audience are members of the scientific association for assembly, handling and industrial robots (WG MHI)

Model Simplification for Efficient Collision Detection in Robotics

Motion planning for industrial robots is a computationally intensive task due to the massive number of potential motions between any two configurations. Calculating all possibilities is generally not feasible. Instead, many motion planners sample a sub-set of the available space until a viable solution is found. Simplifying models to improve collision detection performance, a significant component of motion planning, results in faster and more capable motion planners. Several approaches for simplifying models to improve collision detection performance have been presented in the literature. However, many of them are sub-optimal for an industrial robotics application due to input model limitations, accuracy sacrifices, or the probability of increasing false negatives during collision queries. This thesis focuses on the development of model simplification approaches optimised for industrial robotics applications. Firstly, a new simplification approach, the Bounding Sphere Simplification (BSS), is presented that converts triangle-mesh inputs to a collection of spheres for efficient collision and distance queries. Additionally, BSS removes small features and generates an output model less prone to false negatives