Issues in designing transport layer multicast facilities

Multicasting denotes a facility in a communications system for providing efficient delivery from a message's source to some well-defined set of locations using a single logical address. While modem network hardware supports multidestination delivery, first generation Transport Layer protocols (e.g., the DoD Transmission Control Protocol (TCP) (15) and ISO TP-4 (41)) did not anticipate the changes over the past decade in underlying network hardware, transmission speeds, and communication patterns that have enabled and driven the interest in reliable multicast. Much recent research has focused on integrating the underlying hardware multicast capability with the reliable services of Transport Layer protocols. Here, we explore the communication issues surrounding the design of such a reliable multicast mechanism. Approaches and solutions from the literature are discussed, and four experimental Transport Layer protocols that incorporate reliable multicast are examined

Ethernet - a survey on its fields of application

During the last decades, Ethernet progressively became the most widely used local area networking (LAN) technology. Apart from LAN installations, Ethernet became also attractive for many other fields of application, ranging from industry to avionics, telecommunication, and multimedia. The expanded application of this technology is mainly due to its significant assets like reduced cost, backward-compatibility, flexibility, and expandability. However, this new trend raises some problems concerning the services of the protocol and the requirements for each application. Therefore, specific adaptations prove essential to integrate this communication technology in each field of application. Our primary objective is to show how Ethernet has been enhanced to comply with the specific requirements of several application fields, particularly in transport, embedded and multimedia contexts. The paper first describes the common Ethernet LAN technology and highlights its main features. It reviews the most important specific Ethernet versions with respect to each application field’s requirements. Finally, we compare these different fields of application and we particularly focus on the fundamental concepts and the quality of service capabilities of each proposal

Communication Architecture For Distributed Interactive Simulation (CADIS): Rationale Document Draft

Report on necessary communication system protocol data unit standards which must be accepted and adopted for supporting distributed interactive simulation

Some aspects of a code division multiple access local area network

Not Availabl

Tunneling Horizontal IEC 61850 Traffic through Audio Video Bridging Streams for Flexible Microgrid Control and Protection

In this paper, it is argued that some low-level aspects of the usual IEC 61850 mapping to Ethernet are not well suited to microgrids due to their dynamic nature and geographical distribution as compared to substations. It is proposed that the integration of IEEE time-sensitive networking (TSN) concepts (which are currently implemented as audio video bridging (AVB) technologies) within an IEC 61850 / Manufacturing Message Specification framework provides a flexible and reconfigurable platform capable of overcoming such issues. A prototype test platform and bump-in-the-wire device for tunneling horizontal traffic through AVB are described. Experimental results are presented for sending IEC 61850 GOOSE (generic object oriented substation events) and SV (sampled values) messages through AVB tunnels. The obtained results verify that IEC 61850 event and sampled data may be reliably transported within the proposed framework with very low latency, even over a congested network. It is argued that since AVB streams can be flexibly configured from one or more central locations, and bandwidth reserved for their data ensuring predictability of delivery, this gives a solution which seems significantly more reliable than a pure MMS-based solution

Guidance Document Draft: Communication Architecture For Distributed Interactive Simulation (CADIS)

Report on necessary communication system protocol data unit standards which must be accepted and adopted for supporting distributed interactive simulation

Telecommunication of stabilizing signals in power systems

Deregulation of the power industry has occurred at a rapid pace, opening some promising competition between suppliers. The result of this competition should be to the benefit of customers.;Telecommunication plays a crucial role in integrating systems and ensuring smooth operation by way of exchanging data and information between various systems that are responsible for monitoring and control of the grid. For example, a Power System Stabilizer (PSS) controller could be placed at one of the generators and requires remote measurements. All the communication schemes within the network generate delays that are characterized in this project using OPNET Modeler. OPNET Modeler is also used to characterize the number of dropped packets.;As a case study, we consider a two-area four-generator (2A4G) and explore the role of communication delay on system stability. Those delays play an important role in the design of a controller that can help the damping of electro-mechanical oscillations between interconnected synchronous generators and therefore maintain the system stability. The network statistics are then imported into Simulink in order to visualize the speed of the shaft w2 as a function of time. Additional communication options to the inter-area oscillation problem are offered at the end of the thesis (use of Virtual Private Network (VPN), use of fiber optic dedicated network, or the use of IPv6 protocol)

Application of Asynchronous Transfer Mode (Atm) technology to Picture Archiving and Communication Systems (Pacs): A survey

Broadband Integrated Services Digital Network (R-ISDN) provides a range of narrowband and broad-band services for voice, video, and multimedia. Asynchronous Transfer Mode (ATM) has been selected by the standards bodies as the transfer mode for implementing B-ISDN; The ability to digitize images has lead to the prospect of reducing the physical space requirements, material costs, and manual labor of traditional film handling tasks in hospitals. The system which handles the acquisition, storage, and transmission of medical images is called a Picture Archiving and Communication System (PACS). The transmission system will directly impact the speed of image transfer. Today the most common transmission means used by acquisition and display station products is Ethernet. However, when considering network media, it is important to consider what the long term needs will be. Although ATM is a new standard, it is showing signs of becoming the next logical step to meet the needs of high speed networks; This thesis is a survey on ATM, and PACS. All the concepts involved in developing a PACS are presented in an orderly manner. It presents the recent developments in ATM, its applicability to PACS and the issues to be resolved for realising an ATM-based complete PACS. This work will be useful in providing the latest information, for any future research on ATM-based networks, and PACS

From diversity to convergence : British computer networks and the Internet, 1970-1995

The Internet's success in the 21st century has encouraged analysts to investigate the origin of this network. Much of this literature adopts a teleological approach. Works often begin by discussing the invention of packet switching, describe the design and development of the ARPANET, and then examine how this network evolved into the Internet. Although the ARPANET was a seminal computer network, these accounts usually only briefly consider the many other diverse networks that existed. In addition, apart from momentary asides to alternative internetworking solutions, such as the Open Systems Interconnection (OSI) seven-layer reference model, this literature concentrates exclusively on the ARPANET, the Internet, and the World Wide Web. While focusing on these subjects is important and therefore justified, it can leave the reader with the impression that the world of networking started with the ARPANET and ended with the Internet. This thesis is an attempt to help correct this misconception. This thesis analyses the evolution of British computer networks and the Internet between the years 1970 and 1995. After an introduction in Chapter 1, the thesis analyses several networks. In Chapters 2 and 3, the focus is on academic networks, especially JANET and SuperJANET. Attention moves to videotex networks in Chapter 4, specifically Prestel, and in Chapter 5, the dissertation examines electronic mail networks such as Telecom Gold and Cable & Wireless Easylink. Chapter 6 considers online services, including CompuServe, American Online, and the Microsoft Network, and the thesis ends with a conclusion in Chapter 7. All of the networks discussed used protocols that were incompatible with each other which limited the utility of the networks for their users. Although it was possible that OSI or another solution could have solved this problem, the Internet's protocols achieved this objective. This thesis shows how the networks converged around TCP/IP