OFDM Synthetic Aperture Radar Imaging with Sufficient Cyclic Prefix

The existing linear frequency modulated (LFM) (or step frequency) and random noise synthetic aperture radar (SAR) systems may correspond to the frequency hopping (FH) and direct sequence (DS) spread spectrum systems in the past second and third generation wireless communications. Similar to the current and future wireless communications generations, in this paper, we propose OFDM SAR imaging, where a sufficient cyclic prefix (CP) is added to each OFDM pulse. The sufficient CP insertion converts an inter-symbol interference (ISI) channel from multipaths into multiple ISI-free subchannels as the key in a wireless communications system, and analogously, it provides an inter-range-cell interference (IRCI) free (high range resolution) SAR image in a SAR system. The sufficient CP insertion along with our newly proposed SAR imaging algorithm particularly for the OFDM signals also differentiates this paper from all the existing studies in the literature on OFDM radar signal processing. Simulation results are presented to illustrate the high range resolution performance of our proposed CP based OFDM SAR imaging algorithm.Comment: This version has been accepted by IEEE Transactions on Geoscience and Remote Sensing. IEEE Transactions on Geoscience and Remote Sensing 201

Investigations on OFDM Signal for Range Ambiguity Suppression in SAR Configuration

International audienceThis paper presents an opportunity to cancel range ambiguities in synthetic aperture radar (SAR) configuration. One of the limitations of SAR systems is the range ambiguity phenomenon that appears with long delayed echoes. The reflected signal corresponding to one pulse is detected when the radar has already transmitted the next pulse. Thus, this signal is considered as an echo from the next pulse. This paper investigates the opportunity of coding the transmitted pulses using an orthogonal frequency-division multiplexing pulse. The results show that coded-OFDM signals outperform conventional chirp signal and make it possible to relax constraints placed upon the pulse repetition frequency

IRCI Free Range Reconstruction for SAR Imaging with Arbitrary Length OFDM Pulse

Our previously proposed OFDM with sufficient cyclic prefix (CP) synthetic aperture radar (SAR) imaging algorithm is inter-range-cell interference (IRCI) free and achieves ideally zero range sidelobes for range reconstruction. In this OFDM SAR imaging algorithm, the minimum required CP length is almost equal to the number of range cells in a swath, while the number of subcarriers of an OFDM signal needs to be more than the CP length. This makes the length of a transmitted OFDM sequence at least almost twice of the number of range cells in a swath and for a wide swath imaging, the transmitted OFDM pulse length becomes long, which may cause problems in some radar applications. In this paper, we propose a CP based OFDM SAR imaging with arbitrary pulse length, which has IRCI free range reconstruction and its pulse length is independent of a swath width. We then present a novel design method for our proposed arbitrary length OFDM pulses. Simulation results are presented to illustrate the performances of the OFDM pulse design and the arbitrary pulse length CP based OFDM SAR imaging.Comment: 29 pages, 10 figures, regular pape

Waveform Design for MIMO Radar and SAR Application

Remote sensing applications using radar systems require specific signal processing to obtain high resolution for radar imagery. This high resolution is essential in detection and imaging processing and is provided by using synthetic aperture radar (SAR) processing. This chapter describes the application of the multiple-input multiple-output (MIMO) configuration and the orthogonal frequency-division multiplexing (OFDM) concept to overcome some existing limitations with conventional imaging systems as well as to assess the improvements achieved

Frequency Diverse Array Radar: Signal Characterization and Measurement Accuracy

Radar systems provide an important remote sensing capability, and are crucial to the layered sensing vision; a concept of operation that aims to apply the right number of the right types of sensors, in the right places, at the right times for superior battle space situational awareness. The layered sensing vision poses a range of technical challenges, including radar, that are yet to be addressed. To address the radar-specific design challenges, the research community responded with waveform diversity; a relatively new field of study which aims reduce the cost of remote sensing while improving performance. Early work suggests that the frequency diverse array radar may be able to perform several remote sensing missions simultaneously without sacrificing performance. With few techniques available for modeling and characterizing the frequency diverse array, this research aims to specify, validate and characterize a waveform diverse signal model that can be used to model a variety of traditional and contemporary radar configurations, including frequency diverse array radars. To meet the aim of the research, a generalized radar array signal model is specified. A representative hardware system is built to generate the arbitrary radar signals, then the measured and simulated signals are compared to validate the model. Using the generalized model, expressions for the average transmit signal power, angular resolution, and the ambiguity function are also derived. The range, velocity and direction-of-arrival measurement accuracies for a set of signal configurations are evaluated to determine whether the configuration improves fundamental measurement accuracy