Designing energy-efficient computing systems using equalization and machine learning

As technology scaling slows down in the nanometer CMOS regime and mobile computing becomes more ubiquitous, designing energy-efficient hardware for mobile systems is becoming increasingly critical and challenging. Although various approaches like near-threshold computing (NTC), aggressive voltage scaling with shadow latches, etc. have been proposed to get the most out of limited battery life, there is still no “silver bullet” to increasing power-performance demands of the mobile systems. Moreover, given that a mobile system could operate in a variety of environmental conditions, like different temperatures, have varying performance requirements, etc., there is a growing need for designing tunable/reconfigurable systems in order to achieve energy-efficient operation. In this work we propose to address the energy- efficiency problem of mobile systems using two different approaches: circuit tunability and distributed adaptive algorithms. Inspired by the communication systems, we developed feedback equalization based digital logic that changes the threshold of its gates based on the input pattern. We showed that feedback equalization in static complementary CMOS logic enabled up to 20% reduction in energy dissipation while maintaining the performance metrics. We also achieved 30% reduction in energy dissipation for pass-transistor digital logic (PTL) with equalization while maintaining performance. In addition, we proposed a mechanism that leverages feedback equalization techniques to achieve near optimal operation of static complementary CMOS logic blocks over the entire voltage range from near threshold supply voltage to nominal supply voltage. Using energy-delay product (EDP) as a metric we analyzed the use of the feedback equalizer as part of various sequential computational blocks. Our analysis shows that for near-threshold voltage operation, when equalization was used, we can improve the operating frequency by up to 30%, while the energy increase was less than 15%, with an overall EDP reduction of ≈10%. We also observe an EDP reduction of close to 5% across entire above-threshold voltage range. On the distributed adaptive algorithm front, we explored energy-efficient hardware implementation of machine learning algorithms. We proposed an adaptive classifier that leverages the wide variability in data complexity to enable energy-efficient data classification operations for mobile systems. Our approach takes advantage of varying classification hardness across data to dynamically allocate resources and improve energy efficiency. On average, our adaptive classifier is ≈100× more energy efficient but has ≈1% higher error rate than a complex radial basis function classifier and is ≈10× less energy efficient but has ≈40% lower error rate than a simple linear classifier across a wide range of classification data sets. We also developed a field of groves (FoG) implementation of random forests (RF) that achieves an accuracy comparable to Convolutional Neural Networks (CNN) and Support Vector Machines (SVM) under tight energy budgets. The FoG architecture takes advantage of the fact that in random forests a small portion of the weak classifiers (decision trees) might be sufficient to achieve high statistical performance. By dividing the random forest into smaller forests (Groves), and conditionally executing the rest of the forest, FoG is able to achieve much higher energy efficiency levels for comparable error rates. We also take advantage of the distributed nature of the FoG to achieve high level of parallelism. Our evaluation shows that at maximum achievable accuracies FoG consumes ≈1.48×, ≈24×, ≈2.5×, and ≈34.7× lower energy per classification compared to conventional RF, SVM-RBF , Multi-Layer Perceptron Network (MLP), and CNN, respectively. FoG is 6.5× less energy efficient than SVM-LR, but achieves 18% higher accuracy on average across all considered datasets

Circuits and Systems Advances in Near Threshold Computing

Modern society is witnessing a sea change in ubiquitous computing, in which people have embraced computing systems as an indispensable part of day-to-day existence. Computation, storage, and communication abilities of smartphones, for example, have undergone monumental changes over the past decade. However, global emphasis on creating and sustaining green environments is leading to a rapid and ongoing proliferation of edge computing systems and applications. As a broad spectrum of healthcare, home, and transport applications shift to the edge of the network, near-threshold computing (NTC) is emerging as one of the promising low-power computing platforms. An NTC device sets its supply voltage close to its threshold voltage, dramatically reducing the energy consumption. Despite showing substantial promise in terms of energy efficiency, NTC is yet to see widescale commercial adoption. This is because circuits and systems operating with NTC suffer from several problems, including increased sensitivity to process variation, reliability problems, performance degradation, and security vulnerabilities, to name a few. To realize its potential, we need designs, techniques, and solutions to overcome these challenges associated with NTC circuits and systems. The readers of this book will be able to familiarize themselves with recent advances in electronics systems, focusing on near-threshold computing

Cross-Layer Resiliency Modeling and Optimization: A Device to Circuit Approach

The never ending demand for higher performance and lower power consumption pushes the VLSI industry to further scale the technology down. However, further downscaling of technology at nano-scale leads to major challenges. Reduced reliability is one of them, arising from multiple sources e.g. runtime variations, process variation, and transient errors. The objective of this thesis is to tackle unreliability with a cross layer approach from device up to circuit level

Unreliable Silicon: Circuit through System-Level Techniques for Mitigating the Adverse Effects of Process Variation, Device Degradation and Environmental Conditions.

Designing and manufacturing integrated circuits in advanced, highly-scaled processing technologies that meet stringent specification sets is an increasingly unreliable proposition. Dimensional processing variations, time and stress dependent device degradation and potentially varying environmental conditions exacerbate deviations in performance, power and even functionality of integrated circuits. This work explores a system-level adaptive design philosophy intended to mitigate the power and performance impact of unreliable silicon devices and presents enabling circuits for SRAM variation mitigation and in-situ measurement of device degradation in 130nm and 45nm processing technologies. An adaptation of RAZOR-based DVS designed for on-chip memory power reduction and reliability lifetime improvement enables the elimination of 250 mV of voltage margin in a 1.8V design, with up to 500 mV of reduction when allowing 5% of memory operations to use multiple cycles. A novel PID-controlled dynamic reliability management (DRM) system is presented, allowing user-specified circuit lifetime to be dynamically managed via dynamic voltage and frequency scaling. Peak performance improvement of 20-35% is achievable in typical processing systems by allowing brief periods of elevated voltage operation through the real-time DRM system, while minimizing voltage during non-critical periods of operation to maximize circuit lifetime. A probabilistic analysis of oxide breakdown using the percolation model indicates the need for 1000-2000 integrated in-situ sensors to achieve oxide lifetime prediction error at or under 10%. The conclusions from the oxide analysis are used to guide the design of a series of novel on-chip reliability monitoring circuits for use in a real-time DRM system. A 130nm in-situ oxide breakdown measurement sensor presented is the first published design of an oxide-breakdown oriented circuit and is compatible with standard-cell style automatic “place and route” design styles used in the majority of application specific integrated circuit designs. Measured results show increases in gate oxide leakage of 14-35% after accelerated stress testing. A second generation design of the on-chip oxide degradation sensor is presented that reduces stress mode power consumption by 111,785X over the initial design while providing an ideal 1:1 mapping of gate leakage to output frequency in extracted simulations.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/60701/1/ekarl_1.pd

Device and Circuit Level EMI Induced Vulnerability: Modeling and Experiments

Electro-magnetic interference (EMI) commonly exists in electronic equipment containing semiconductor-based integrated circuits (ICs). Metal-oxide-semiconductor field-effect-transistors (MOSFETs) in the ICs may be disrupted under EMI conditions due to transient voltage-current surges, and their internal states may change undesirably. In this work, the vulnerabilities of silicon MOSFETs under EMI are studied at the device and the circuit levels, categorized as non-permanent upsets (``Soft Errors'') and permanent damages (``Hard Failures''). The Soft Errors, such as temporary bit errors and waveform distortions, may happen or be intensified under EMI, as the transient disruptions activate unwanted and highly non-linear changes inside MOSFETs, such as Impact Ionization and Snapback. The system may be corrected from the erroneous state when the EMI condition is removed. We simulate planar silicon n-type MOSFETs at the device level to study the physical mechanisms leading to or complicate the short-term, signal-level Soft Errors. We experimentally tested commercially available MOSFET devices. Not included in regular MOSFET models, exponential-like current increases as the terminal voltage increases are observed and explained using the device-level knowledge. We develop a compact Soft Error model, compatible with circuit simulators using lumped (or compact-model) components and closed-form expressions, such as SPICE, and calibrate it with our in-house experimental data using an in-house extraction technique based on the Genetic Algorithm. Example circuits are simulated using the extracted device model and under EMI-induced transient disruptions. The EMI voltage-current disruptions may also lead to permanent Hard Failures that cannot be repaired without replacement. One type of Hard Failures, the MOSFET gate dielectric (or ``oxide'') breakdown, can result in input-output relation changes and additional thermal runaway. We have fabricated individual MOSFET devices at the FabLab at the University of Maryland NanoCenter. We experimentally stress-test the fabricated devices and observe the rapid, permanent oxide breakdown. Then, we simulate a nano-scale FinFET device with ultra-thin gate oxide at the device level. Then, we apply the knowledge from our experiments to the simulated FinFET, producing a gate oxide breakdown Hard Failure circuit model. The proposed workflow enables the evaluation of EMI-induced vulnerabilities in circuit simulations before actual fabrication and experiments, which can help the early-stage prototyping process and reduce the development time

Thermal Management for Dependable On-Chip Systems

This thesis addresses the dependability issues in on-chip systems from a thermal perspective. This includes an explanation and analysis of models to show the relationship between dependability and tempature. Additionally, multiple novel methods for on-chip thermal management are introduced aiming to optimize thermal properties. Analysis of the methods is done through simulation and through infrared thermal camera measurements

High-Density Solid-State Memory Devices and Technologies

This Special Issue aims to examine high-density solid-state memory devices and technologies from various standpoints in an attempt to foster their continuous success in the future. Considering that broadening of the range of applications will likely offer different types of solid-state memories their chance in the spotlight, the Special Issue is not focused on a specific storage solution but rather embraces all the most relevant solid-state memory devices and technologies currently on stage. Even the subjects dealt with in this Special Issue are widespread, ranging from process and design issues/innovations to the experimental and theoretical analysis of the operation and from the performance and reliability of memory devices and arrays to the exploitation of solid-state memories to pursue new computing paradigms

The 1991 3rd NASA Symposium on VLSI Design

Papers from the symposium are presented from the following sessions: (1) featured presentations 1; (2) very large scale integration (VLSI) circuit design; (3) VLSI architecture 1; (4) featured presentations 2; (5) neural networks; (6) VLSI architectures 2; (7) featured presentations 3; (8) verification 1; (9) analog design; (10) verification 2; (11) design innovations 1; (12) asynchronous design; and (13) design innovations 2

Belle II Technical Design Report

The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector.Comment: Edited by: Z. Dole\v{z}al and S. Un

Journal of Telecommunications and Information Technology, 2009, nr 4

kwartalni