1,013 research outputs found

    Laser-induced forward transfer: fundamentals and applications

    Full text link
    Laser-induced forward transfer (LIFT) is a digital printing technique that uses a pulsed laser beam as the driving force to project material from a donor thin film toward the receiving substrate whereon that material will be finally deposited as a voxel. This working principle allows LIFT to operate with both solid and liquid donor films, which provides the technique with an unprecedented broad spectrum of printable materials, and thus makes it very competitive over other digital technologies, like inkjet printing. It is not only that LIFT can access a much wider range of ink viscosities and loading particle sizes; the possibility of printing from solid films allows the single-step printing of multilayers and entire devices, and even makes possible 3D printing. This versatility translates, in turn, into a broad field of applications, from graphics production to printed electronics, from the fabrication of chemical sensors to tissue engineering. This monograph provides an extensive review of the LIFT technique, from its origins to the most recent achievements, focusing on the fundamental aspects of both its working principle and transfer dynamics, as well as on its broad range of applications

    Stable large area drop-on-demand deposition of a conductive polymer ink for 3D-printed electronics, enabled by bio-renewable co-solvents

    Get PDF
    Development of conductive polymer ink formulations with reliable jetting stability and physical properties could offer sustainable routes for scaling-up the 3D-printing of electronics. We report a new poly(3,4-ethylenedioxythiophene) polystyrene sulphonate (PEDOT:PSS) ink formulation, InkCG, using bio-renewable solvents dihydrolevoglucosenone (cyrene) and glycerol carbonate (GC) as an alternative to commonly used dimethyl sulfoxide (DMSO). These green organic co-solvents enhance jetting reliability and long-term stability of the ink and improve electrical properties of the deposited PEDOT:PSS layers, compared to the commonly used DMSO-containing ink formulations. We achieve large-area and high-fidelity electronic devices (array of 140 devices) with reproducible electrical performance through inkjet-based 3D printing. Enhanced performance stability is observed under cyclic bending, thermal annealing, UV or IR exposure, offering exciting opportunities for sustainable deposition of PEDOT:PSS for large-area 3D printing and its exploitation in heterostructures and flexible electronics

    Selected problems of materials science. Vol. 2. Nano-dielectrics metals in electronics. Mеtamaterials. Multiferroics. Nano-magnetics

    Get PDF
    The textbook examines physical foundations and practical application of current electronics materials. Modern theories are presented, more important experimental data and specifications of basic materials necessary for practical application are given. Contemporary research in the field of microelectronics and nanophysics is taken into account, while special attention is paid to the influence of the internal structure on the physical properties of materials and the prospects for their use. English-language lectures and other classes on the subject of the book are held at Igor Sikorsky Kyiv Polytechnic Institute at the departments of “Applied Physics” and “Microelectronics” on the subject of materials science, which is necessary for students of higher educational institutions when performing scientific works. For master’s degree applicants in specialty 105 “Applied physics and nanomaterials”.Розглянуто фізичні основи та практичне застосування актуальних матеріалів електроніки. Подано сучасні теорії, наведено найважливіші експериментальні дані та специфікації основних матеріалів, які потрібні для практичного застосування. Враховано сучасні дослідження у галузі мікроелектроніки та нанофізики, при цьому особливу увагу приділено впливу внутрішньої структури на фізичні властивості матеріалів і на перспективи їх використання. Англомовні лекції та інші види занять за тематикою книги проводяться в КПІ ім. Ігоря Сікорського на кафедрах «Прикладна фізика» та «Мікро-електроніка» за напрямом матеріалознавство, що необхідно студентам вищих навчальних закладів при виконанні наукових робіт. Для здобувачів магістратури за спеціальністю 105 «Прикладна фізика та наноматеріали»

    Optimization of niobium oxide-based threshold switches for oscillator-based applications

    Get PDF
    In niobium oxide-based capacitors non-linear switching characteristics can be observed if the oxide properties are adjusted accordingly. Such non-linear threshold switching characteristics can be utilized in various non-linear circuit applications, which have the potential to pave the way for the application of new computing paradigms. Furthermore, the non-linearity also makes them an interesting candidate for the application as selector devices e.g. for non-volatile memory devices. To satisfy the requirements for those two areas of application, the threshold switching characteristics need to be adjusted to either obtain a maximized voltage extension of the negative differential resistance region in the quasi-static I-V characteristics, which enhances the non-linearity of the devices and results in improved robustness to device-to-device variability or to adapt the threshold voltage to a specific non-volatile memory cell. Those adaptations of the threshold switching characteristics were successfully achieved by deliberate modifications of the niobium oxide stack. Furthermore, the impact of the material stack on the dynamic behavior of the threshold switches in non-linear circuits as well as the impact of the electroforming routine on the threshold switching characteristics were analyzed. The optimized device stack was transferred from the micrometer-sized test structures to submicrometer-sized devices, which were packaged to enable easy integration in complex circuits. Based on those packaged threshold switching devices the behavior of single as well as of coupled relaxation oscillators was analyzed. Subsequently, the obtained results in combination with the measurement results for the statistic device-to-device variability were used as a basis to simulate the pattern formation in coupled relaxation oscillator networks as well as their performance in solving graph coloring problems. Furthermore, strategies to adapt the threshold voltage to the switching characteristics of a tantalum oxide-based non-volatile resistive switch and a non-volatile phase change cell, to enable their application as selector devices for the respective cells, were discussed.:Abstract I Zusammenfassung II List of Abbrevations VI List of Symbols VII 1 Motivation 1 2 Basics 5 2.1 Negative differential resistance and local activity in memristor devices 5 2.2 Threshold switches as selector devices 8 2.3 Switching effects observed in NbOx 13 2.3.1 Threshold switching caused by metal-insulator transition 13 2.3.2 Threshold switching caused by Frenkel-Poole conduction 18 2.3.3 Non-volatile resistive switching 32 3 Sample preparation 35 3.1 Deposition techniques 35 3.1.1 Evaporation 35 3.1.2 Sputtering 36 3.2 Micrometer-sized devices 36 3.3 Submicrometer-sized devices 37 3.3.1 Process flow 37 3.3.2 Reduction of the electrode resistance 39 3.3.3 Transfer from structuring via electron beam lithography to structuring via laser lithography 48 3.3.4 Packaging procedure 50 4 Investigation and optimization of the electrical device characteristic 51 4.1 Introduction 51 4.2 Measurement setup 52 4.3 Electroforming 53 4.3.1 Optimization of the electroforming process 53 4.3.2 Characterization of the formed filament 62 4.4 Dynamic device characteristics 67 4.4.1 Emergence and measurement of dynamic behavior 67 4.4.2 Impact of the dynamic device characteristics on quasi-static I-V characteristics 70 5 Optimization of the material stack 81 5.1 Introduction 81 5.2 Adjustment of the oxygen content in the bottom layer 82 5.3 Influence of the thickness of the oxygen-rich niobium oxide layer 92 5.4 Multilayer stacks 96 5.5 Device-to-device and Sample-to-sample variability 110 6 Applications of NbOx-based threshold switching devices 117 6.1 Introduction 117 6.2 Non-linear circuits 117 6.2.1 Coupled relaxation oscillators 117 6.2.2 Memristor Cellular Neural Network 121 6.2.3 Graph Coloring 127 6.3 Selector devices 132 7 Summary and Outlook 138 8 References 141 9 List of publications 154 10 Appendix 155 10.1 Parameter used for the LT Spice simulation of I-V curves for threshold switches with varying oxide thicknesses 155 10.2 Dependence of the oscillation frequency of the relaxation oscillator circuit on the capacitance and the applied source voltage 156 10.3 Calculation of the oscillation frequency of the relaxation oscillator circuit 157 10.4 Characteristics of the memristors and the cells utilized in the simulation of the memristor cellular neural network 164 10.5 Calculation of the impedance of the cell in the memristor cellular network 166 10.6 Example graphs from the 2nd DIMACS series 179 11 List of Figures 182 12 List of Tables 19

    Inkjet printing digital image generation and compensation for surface chemistry effects

    Get PDF
    Additive manufacturing (AM) of electronic materials using digital inkjet printing (DIJP) is of research interests nowadays because of its potential benefits in the semiconductor industry. Current trends in manufacturing electronics feature DIJP as a key technology to enable the production of customised and microscale functional devices. However, the fabrication of microelectronic components at large scale demands fast printing of tight features with high dimensional accuracy on substrates with varied surface topography which push inkjet printing process to its limits. To understand the DIJP droplet deposition on such substrates, generally requires computational fluid dynamics modelling which is limited in its physics approximation of surface interactions. Otherwise, a kind of “trial and error” approach to determining how the ink spreads, coalesce and solidifies over the substrate is used, often a very time-consuming process. Consequently, this thesis aims to develop new modelling techniques to predict fast and accurately the surface morphology of inkjet-printed features, enabling the optimisation of DIJP control parameters and the compensation of images for better dimensional accuracy of printed electronics devices. This investigation explored three categories of modelling techniques to predict the surface morphology of inkjet-printed features: physics-based, data-driven and hybrid physics-based and data-driven. Two physics-based numerical models were developed to reproduce the inkjet printing droplet deposition and solidification processes using a lattice Boltzmann (LB) multiphase flow model and a finite element (FE) chemo-mechanical model, respectively. The LB model was limited to the simulation of single tracks and small square films and the FE model was mainly employed for the distortion prediction of multilayer objects. Alternatively, two data-driven models were implemented to reconstruct the surface morphology of single tracks and free-form films using images from experiments: image analysis (IA) and shape from shading (SFS). IA assumed volume conservation and minimal energy drop shape to reconstruct the surface while SFS resolved the height of the image using a reflection model. Finally, a hybrid physics-based and data-driven approach was generated which incorporates the uncertainty of droplet landing position and footprint, hydrostatic analytical models, empirical correlations derived from experiments, and relationships derived from physics-based models to predict fast and accurately any free-form layer pattern as a function of physical properties, printing parameters and wetting characteristics. Depending on the selection of the modelling technique to predict the deformed geometry, further considerations were required. For the purely physics-based and data-driven models, a surrogate model using response surface equations was employed to create a transfer function between printing parameters, substrate wetting characteristics and the resulting surface morphology. The development of a transfer function significantly decreased the computational time required by purely physics-based models and enabled the parameter optimisation using a multi-objective genetic algorithm approach to attain the best film dimensional accuracy. Additionally, for multilayer printing applications, a layer compensation approach was achieved utilizing a convolutional neural network trained by the predicted (deformed) geometry to reduce the out of plane error to target shape. The optimal combination of printing parameters and input image compensation helped with the generation of fine features that are traditionally difficult for inkjet, improved resolution of edges and corners by reducing the amount of overflow from material, accounted for varied topography and capillary effects thereof on the substrate surface and considered the effect of multiple layers built up on each other. This study revealed for the first time to the best of our knowledge the role of the droplet location and footprint diameter uncertainty in the stability and uniformity of printed features. Using a droplet overlap map which was proposed as a universal technique to assess the effect of printing parameters on pattern geometry, it was shown that reliable limits for break-up and bulging of printed features were obtained. Considering droplet position and diameter size uncertainties, predicted optimal printing parameters improved the quality of printed films on substrates with different wettability. Finally, a stability diagram illustrating the onset of bulging and separation for lines and films as well as the optimal drop spacing, printing frequency and stand-off distance was generated to inform visually the results. This investigation has developed a predictive physics-based model of the surface morphology of DIJP features on heterogeneous substrates and a methodology to find the printing parameters and compensate the layer geometry required for optimum part dimensional accuracy. The simplicity of the proposed technique makes it a promising tool for model driven inkjet printing process optimization, including real time process control and paves the way for better quality devices in the printed electronics industry

    Sputter deposition on composites : interplay between film and substrate properties

    Get PDF

    Electronic Devices for the Combination of Electrically Controlled Drug Release, Electrostimulation, and Optogenetic Stimulation for Nerve Tissue Regeneration

    Full text link
    [ES] La capacidad de las células madre para proliferar formando distintas células especializadas les otorga la potencialidad de servir de base para terapias efectivas para patologías cuyo tratamiento era inimaginable hasta hace apenas dos décadas. Sin embargo, esta capacidad se encuentra mediada por estímulos fisiológicos, químicos, y eléctricos, específicos y complejos, que dificultan su traslación a la rutina clínica. Por ello, las células madre representan un campo de estudio en el que se invierten amplios esfuerzos por parte de la comunidad científica. En el ámbito de la regeneración nerviosa, para modular su desarrollo y diferenciación el tratamiento farmacológico, la electroestimulación, y la estimulación optogenética son técnicas que están consiguiendo prometedores resultados. Es por ello por lo que en la presente tesis se ha desarrollado un conjunto de sistemas electrónicos para permitir la aplicación combinada de estas técnicas in vitro, con perspectiva a su aplicación in vivo. Hemos diseñado una novedosa tecnología para la liberación eléctricamente controlada de fármacos. Esta tecnología está basada en nanopartículas de sílice mesoporosa y puertas moleculares de bipiridina-heparina. Las puertas moleculares son electroquímicamente reactivas, y encierran los fármacos en el interior de las nanopartículas, liberándolos ante un estímulo eléctrico. Hemos caracterizado esta tecnología, y la hemos validado mediante la liberación controlada de rodamina en cultivos celulares de HeLa. Para la combinación de liberación controlada de fármacos y electroestimulación hemos desarrollado dispositivos que permiten aplicar los estímulos eléctricos de forma configurable desde una interfaz gráfica de usuario. Además, hemos diseñado un módulo de expansión que permite multiplexar las señales eléctricas a diferentes cultivos celulares. Además, hemos diseñado un dispositivo de estimulación optogenética. Este tipo de estimulación consiste en la modificación genética de las células para que sean sensibles a la radiación lumínica de determinada longitud de onda. En el ámbito de la regeneración de tejido mediante células precursoras neurales, es de interés poder inducir ondas de calcio, favoreciendo su diferenciación en neuronas y la formación de circuitos sinápticos. El dispositivo diseñado permite obtener imágenes en tiempo real mediante microscopía confocal de las respuestas transitorias de las células al ser irradiadas. El dispositivo se ha validado irradiando neuronas modificadas con luz pulsada de 100 ms. También hemos diseñado un dispositivo electrónico complementario de medida de irradiancia con el doble fin de permitir la calibración del equipo de irradiancia y medir la irradiancia en tiempo real durante los experimentos in vitro. Los resultados del uso de los bioactuadores en procesos complejos y dinámicos, como la regeneración de tejido nervioso, son limitados en lazo abierto. Uno de los principales aspectos analizados es el desarrollo de biosensores que permitiesen la cuantización de ciertas biomoléculas para ajustar la estimulación suministrada en tiempo real. Por ejemplo, la segregación de serotonina es una respuesta identificada en la elongación de células precursoras neurales, pero hay otras biomoléculas de interés para la implementación de un control en lazo cerrado. Entre las tecnologías en el estado del arte, los biosensores basados en transistores de efecto de campo (FET) funcionalizados con aptámeros son realmente prometedores para esta aplicación. Sin embargo, esta tecnología no permitía la medición simultánea de más de una biomolécula objetivo en un volumen reducido debido a las interferencias entre los distintos FETs, cuyos terminales se encuentran inmersos en la solución. Por ello, hemos desarrollado instrumentación electrónica capaz de medir simultáneamente varios de estos biosensores, y la hemos validado mediante la medición simultánea de pH y la detección preliminar de serotonina y glutamato.[CA] La capacitat de les cèl·lules mare per a proliferar formant diferents cèl·lules especialitzades els atorga la potencialitat de servir de base per a teràpies efectives per a patologies el tractament de les quals era inimaginable fins fa a penes dues dècades. No obstant això, aquesta capacitat es troba mediada per estímuls fisiològics, químics, i elèctrics, específics i complexos, que dificulten la seua translació a la rutina clínica. Per això, les cèl·lules mare representen un camp d'estudi en el qual s'inverteixen amplis esforços per part de la comunitat científica. En l'àmbit de la regeneració nerviosa, per a modular el seu desenvolupament i diferenciació el tractament farmacològic, l'electroestimulació, i l'estimulació optogenética són tècniques que estan aconseguint prometedors resultats. És per això que en la present tesi s'ha desenvolupat un conjunt de sistemes electrònics per a permetre l'aplicació combinada d'aquestes tècniques in vitro, amb perspectiva a la seua aplicació in vivo. Hem dissenyat una nova tecnologia per a l'alliberament elèctricament controlat de fàrmacs. Aquesta tecnologia està basada en nanopartícules de sílice mesoporosa i portes moleculars de bipiridina-heparina. Les portes moleculars són electroquímicament reactives, i tanquen els fàrmacs a l'interior de les nanopartícules, alliberant-los davant un estímul elèctric. Hem caracteritzat aquesta tecnologia, i l'hem validada mitjançant l'alliberament controlat de rodamina en cultius cel·lulars de HeLa. Per a la combinació d'alliberament controlat de fàrmacs i electroestimulació hem desenvolupat dispositius que permeten aplicar els estímuls elèctrics de manera configurable des d'una interfície gràfica d'usuari. A més, hem dissenyat un mòdul d'expansió que permet multiplexar els senyals elèctrics a diferents cultius cel·lulars. A més, hem dissenyat un dispositiu d'estimulació optogenètica. Aquest tipus d'estimulació consisteix en la modificació genètica de les cèl·lules perquè siguen sensibles a la radiació lumínica de determinada longitud d'ona. En l'àmbit de la regeneració de teixit mitjançant cèl·lules precursores neurals, és d'interés poder induir ones de calci, afavorint la seua diferenciació en neurones i la formació de circuits sinàptics. El dispositiu dissenyat permet obtindré imatges en temps real mitjançant microscòpia confocal de les respostes transitòries de les cèl·lules en ser irradiades. El dispositiu s'ha validat irradiant neurones modificades amb llum polsada de 100 ms. També hem dissenyat un dispositiu electrònic complementari de mesura d'irradiància amb el doble fi de permetre el calibratge de l'equip d'irradiància i mesurar la irradiància en temps real durant els experiments in vitro. Els resultats de l'ús dels bioactuadors en processos complexos i dinàmics, com la regeneració de teixit nerviós, són limitats en llaç obert. Un dels principals aspectes analitzats és el desenvolupament de biosensors que permeteren la quantització de certes biomolècules per a ajustar l'estimulació subministrada en temps real. Per exemple, la segregació de serotonina és una resposta identificada amb l'elongació de les cèl·lules precursores neurals, però hi ha altres biomolècules d'interés per a la implementació d'un control en llaç tancat. Entre les tecnologies en l'estat de l'art, els biosensors basats en transistors d'efecte de camp (FET) funcionalitzats amb aptàmers són realment prometedors per a aquesta aplicació. No obstant això, aquesta tecnologia no permetia el mesurament simultani de més d'una biomolècula objectiu en un volum reduït a causa de les interferències entre els diferents FETs, els terminals dels quals es troben immersos en la solució. Per això, hem desenvolupat instrumentació electrònica capaç de mesurar simultàniament diversos d'aquests biosensors i els hem validat amb mesurament simultani del pH i la detecció preliminar de serotonina i glutamat.[EN] The stem cells' ability to proliferate to form different specialized cells gives them the potential to serve as the basis for effective therapies for pathologies whose treatment was unimaginable until just two decades ago. However, this capacity is mediated by specific and complex physiological, chemical, and electrical stimuli that complicate their translation to clinical routine. For this reason, stem cells represent a field of study in which the scientific community is investing a great deal of effort. In the field of nerve regeneration, to modulate their development and differentiation, pharmacological treatment, electrostimulation, and optogenetic stimulation are techniques that are achieving promising results. For this reason, we have developed a set of electronic systems to allow the combined application of these techniques in vitro, with a view to their application in vivo. We have designed a novel technology for the electrically controlled release of drugs. This technology is based on mesoporous silica nanoparticles and bipyridine-heparin molecular gates. The molecular gates are electrochemically reactive and entrap the drugs inside the nanoparticles, releasing them upon electrical stimulus. We have characterized this technology and validated it by controlled release of rhodamine in HeLa cell cultures. For combining electrostimulation and controlled drug release we have developed devices that allow applying the different electrical stimuli in a configurable way from a graphical user interface. In addition, we have designed an expansion module that allows multiplexing electrical signals to different cell cultures. In addition, we have designed an optogenetic stimulation device. This type of stimulation consists of genetically modifying cells to make them sensitive to light radiation of a specific wavelength. In tissue regeneration using neural precursor cells, it is interesting to be able to induce calcium waves, favoring the cell differentiation into neurons and the formation of synaptic circuits. The designed device enable the obtention of real-time images through confocal microscopy of the transient responses of cells upon irradiation. The device has been validated by irradiating modified neurons with 100 ms pulsed light stimulation. We have also designed a complementary electronic irradiance measurement device to allow calibration of the irradiator equipment and measuring irradiance in real time during in vitro experiments. The results of using bioactuators in complex and dynamic processes, such as nerve tissue regeneration, are limited in an open loop. One of the main aspects analyzed is the development of biosensors that would allow quantifying of specific biomolecules to adjust the stimulation provided in real time. For instance, serotonin secretion is an identified response of neural precursor cells elongation, among other biomolecules of interest for the implementation of a closed-loop control. Among the state-of-the-art technologies, biosensors based on field effect transistors (FETs) functionalized with aptamers are promising for this application. However, this technology did not allow the simultaneous measurement of more than one target biomolecule in a small volume due to interferences between the different FETs, whose terminals are immersed in the solution. This is why we have developed electronic instrumentation capable of simultaneously measuring several of these biosensors, and we have validated it with the simultaneous pH measurement and the preliminary detection of serotonin and glutamate.Monreal Trigo, J. (2023). Electronic Devices for the Combination of Electrically Controlled Drug Release, Electrostimulation, and Optogenetic Stimulation for Nerve Tissue Regeneration [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/19384

    General Course Catalog [2022/23 academic year]

    Get PDF
    General Course Catalog, 2022/23 academic yearhttps://repository.stcloudstate.edu/undergencat/1134/thumbnail.jp

    2022 Review of Data-Driven Plasma Science

    Get PDF
    Data-driven science and technology offer transformative tools and methods to science. This review article highlights the latest development and progress in the interdisciplinary field of data-driven plasma science (DDPS), i.e., plasma science whose progress is driven strongly by data and data analyses. Plasma is considered to be the most ubiquitous form of observable matter in the universe. Data associated with plasmas can, therefore, cover extremely large spatial and temporal scales, and often provide essential information for other scientific disciplines. Thanks to the latest technological developments, plasma experiments, observations, and computation now produce a large amount of data that can no longer be analyzed or interpreted manually. This trend now necessitates a highly sophisticated use of high-performance computers for data analyses, making artificial intelligence and machine learning vital components of DDPS. This article contains seven primary sections, in addition to the introduction and summary. Following an overview of fundamental data-driven science, five other sections cover widely studied topics of plasma science and technologies, i.e., basic plasma physics and laboratory experiments, magnetic confinement fusion, inertial confinement fusion and high-energy-density physics, space and astronomical plasmas, and plasma technologies for industrial and other applications. The final section before the summary discusses plasma-related databases that could significantly contribute to DDPS. Each primary section starts with a brief introduction to the topic, discusses the state-of-the-art developments in the use of data and/or data-scientific approaches, and presents the summary and outlook. Despite the recent impressive signs of progress, the DDPS is still in its infancy. This article attempts to offer a broad perspective on the development of this field and identify where further innovations are required
    corecore