98,940 research outputs found
Power-efficient current-mode analog circuits for highly integrated ultra low power wireless transceivers
In this thesis, current-mode low-voltage and low-power techniques have been applied to implement novel analog circuits for zero-IF receiver backend design, focusing on amplification, filtering and detection stages. The structure of the thesis follows a bottom-up scheme: basic techniques at device level for low voltage low power operation are proposed in the first place, followed by novel circuit topologies at cell level, and finally the achievement of new designs at system level.
At device level the main contribution of this work is the employment of Floating-Gate (FG) and Quasi-Floating-Gate (QFG) transistors in order to reduce the power consumption. New current-mode basic topologies are proposed at cell level: current mirrors and current conveyors. Different topologies for low-power or high performance operation are shown, being these circuits the base for the system level designs.
At system level, novel current-mode amplification, filtering and detection stages using the former mentioned basic cells are proposed. The presented current-mode filter makes use of companding techniques to achieve high dynamic range and very low power consumption with for a very wide tuning range. The amplification stage avoids gain bandwidth product achieving a constant bandwidth for different gain configurations using a non-linear active feedback network, which also makes possible to tune the bandwidth. Finally, the proposed current zero-crossing detector represents a very power efficient mixed signal detector for phase modulations. All these designs contribute to the design of very low power compact Zero-IF wireless receivers.
The proposed circuits have been fabricated using a 0.5ÎŒm double-poly n-well CMOS technology, and the corresponding measurement results are provided and analyzed to validate their operation. On top of that, theoretical analysis has been done to fully explore the potential of the resulting circuits and systems in the scenario of low-power low-voltage applications.Programa Oficial de Doctorado en TecnologĂas de las Comunicaciones (RD 1393/2007)Komunikazioen Teknologietako Doktoretza Programa Ofiziala (ED 1393/2007
Novel active function blocks and their applications in frequency filters and quadrature oscillators
KmitoÄtovĂ© filtry a sinusoidnĂ oscilĂĄtory jsou lineĂĄrnĂ elektronickĂ© obvody, kterĂ© jsou pouĆŸĂvĂĄny v ĆĄirokĂ© oblasti elektroniky a jsou zĂĄkladnĂmi stavebnĂmi bloky v analogovĂ©m zpracovĂĄnĂ signĂĄlu. V poslednĂ dekĂĄdÄ pro tento ĂșÄel bylo prezentovĂĄno velkĂ© mnoĆŸstvĂ stavebnĂch funkÄnĂch blokĆŻ. V letech 2000 a 2006 na Ăstavu telekomunikacĂ, VUT v BrnÄ byly definovĂĄny univerzĂĄlnĂ proudovĂœ konvejor (UCC) a univerzĂĄlnĂ napÄt'ovĂœ konvejor (UVC) a vyrobeny ve spoluprĂĄci s firmou AMI Semiconductor Czech, Ltd. OvĆĄem, stĂĄle existuje poĆŸadavek na vĂœvoj novĂœch aktivnĂch prvkĆŻ, kterĂ© nabĂzejĂ novĂ© vĂœhody. HlavnĂ pĆĂnos prĂĄce proto spoÄĂvĂĄ v definici dalĆĄĂch pĆŻvodnĂch aktivnĂch stavebnĂch blokĆŻ jako jsou differential-input buffered and transconductance amplifier (DBTA), current follower transconductance amplifier (CFTA), z-copy current-controlled current inverting transconductance amplifier (ZC-CCCITA), generalized current follower differential input transconductance amplifier (GCFDITA), voltage gain-controlled modified current-feedback operational amplifier (VGC-MCFOA), a minus-type current-controlled third-generation voltage conveyor (CC-VCIII-). PomocĂ navrĆŸenĂœch aktivnĂch stavebnĂch blokĆŻ byly prezentovĂĄny pĆŻvodnĂ zapojenĂ fĂĄzovacĂch ÄlĂĄnkĆŻ prvnĂho ĆĂĄdu, univerzĂĄlnĂ filtry druhĂ©ho ĆĂĄdu, ekvivalenty obvodu typu KHN, inverznĂ filtry, aktivnĂ simulĂĄtory uzemnÄnĂ©ho induktoru a kvadraturnĂ sinusoidnĂ oscilĂĄtory pracujĂcĂ v proudovĂ©m, napÄt'ovĂ©m a smĂĆĄenĂ©m mĂłdu. ChovĂĄnĂ navrĆŸenĂœch obvodĆŻ byla ovÄĆena simulacĂ v prostĆedĂ SPICE a ve vybranĂœch pĆĂpadech experimentĂĄlnĂm mÄĆenĂm.Frequency filters and sinusoidal oscillators are linear electric circuits that are used in wide area of electronics and also are the basic building blocks in analogue signal processing. In the last decade, huge number of active building blocks (ABBs) were presented for this purpose. In 2000 and 2006, the universal current conveyor (UCC) and the universal voltage conveyor (UVC), respectively, were designed at the Department of Telecommunication, BUT, Brno, and produced in cooperation with AMI Semiconductor Czech, Ltd. There is still the need to develop new active elements that offer new advantages. The main contribution of this thesis is, therefore, the definition of other novel ABBs such as the differential-input buffered and transconductance amplifier (DBTA), the current follower transconductance amplifier (CFTA), the z-copy current-controlled current inverting transconductance amplifier (ZC-CCCITA), the generalized current follower differential input transconductance amplifier (GCFDITA), the voltage gain-controlled modified current-feedback operational amplifier (VGC-MCFOA), and the minus-type current-controlled third-generation voltage conveyor (CC-VCIII-). Using the proposed ABBs, novel structures of first-order all-pass filters, second-order universal filters, KHN-equivalent circuits, inverse filters, active grounded inductance simulators, and quadrature sinusoidal oscillators working in the current-, voltage-, or mixed-mode are presented. The behavior of the proposed circuits has been verified by SPICE simulations and in selected cases also by experimental measurements.
A Novel (DDCC-SFG)-Based Systematic Design Technique of Active Filters
This paper proposes a novel idea for the synthesis of active filters that is based on the use of signal-flow graph (SFG) stamps of differential difference current conveyors (DDCCs). On the basis of an RLC passive network or a filter symbolic transfer function, an equivalent SFG is constructed. DDCCsâ SFGs are identified inside the constructed âactiveâ graph, and thus the equivalent circuit can be easily synthesized. We show that the DDCC and its âderivativesâ, i.e. differential voltage current conveyors and the conventional current conveyors, are the main basic building blocks in such design. The practicability of the proposed technique is showcased via three application examples. Spice simulations are given to show the viability of the proposed technique
Realization of Low-Voltage Modified CBTA and Design of Cascadable Current-Mode All-Pass Filter
In this paper, a low voltage modified current backward transconductance amplifier (MCBTA) and a novel first-order current-mode (CM) all-pass filter are presented. The MCBTA can operate with ±0.9 V supply voltage and the total power consumption of MCBTA is 1.27 mW. The presented all-pass filter employs single MCBTA, a grounded resistor and a grounded capacitor. The circuit possesses low input and high output impedances which make it ideal for current-mode systems. The presented all-pass filter circuit can be made electronically tunable due to the bias current of the MCBTA. Non-ideal study along with simulation results are given for validation purpose. Further, an nth-order cascadable all-pass filter is also presented. It uses n MCBTAs, n grounded resistors and n grounded capacitors. The performance of the proposed circuits is demonstrated by using PSPICE simulations based on the 0.18 ”m TSMC level-7 CMOS technology parameters
Novel Resistorless Mixed-Mode PID Controller with Improved Low-Frequency Performance
This paper introduces a new resistorless mixed-mode proportional-integral-derivative (PID) controller. It employs six simple transconductors and only two grounded capacitors. The proposed PID controller offers several advantageous features of resistorless configuration, use of grounded capacitors, independent electronic-tuning characteristic of its parameters, and mixed-mode operation such as current, transimpedance, transadmittance, and voltage modes. The parasitic element effects of the transconductors on the proposed controller are investigated and the improved low-frequency performance of the proposed controller is then discussed. As applications, the proposed controller is demonstrated on two closed-loop systems. The PSPICE simulations with TSMC 0.18”m CMOS process and ±0.9V supply voltage verify the theoretical analysis
Voltage-Mode Multifunction Biquadratic Filters Using New Ultra-Low-Power Differential Difference Current Conveyors
This paper presents two low-power voltage-mode multifunction biquadratic filters using differential difference current conveyors. Each proposed circuit employs three differential difference current conveyors, two grounded capacitors and two grounded resistors. The low-voltage ultra-low-power differential difference current conveyor is used to provide low-power consumption of the proposed filters. By appropriately connecting the input and output terminals, the proposed filters can provide low-pass, band-pass, high-pass, band-stop and all-pass voltage responses at high-input terminals, which is a desirable feature for voltage-mode operations. The natural frequency and the quality factor can be orthogonally set by adjusting the circuit components. For realizing all the filter responses, no inverting-type input signal requirements as well as no component-matching conditional requirements are imposed. The incremental parameter sensitivities are also low. The characteristics of the proposed circuits are simulated by using PSPICE simulators to confirm the presented theory
A Low-Voltage Electronically Tunable MOSFET-C Voltage-Mode First-Order All-Pass Filter Design
This paper presents a simple electronically tunable voltage-mode first-order all-pass filter realization with MOSFET-C technique. In comparison to the classical MOSFET-C filter circuits that employ active elements including large number of transistors the proposed circuit is only composed of a single two n-channel MOSFET-based inverting voltage buffer, three passive components, and one NMOS-based voltage-controlled resistor, which is with advantage used to electronically control the pole frequency of the filter in range 103 kHz to 18.3 MHz. The proposed filter is also very suitable for low-voltage operation, since between its supply rails it uses only two MOSFETs. In the paper the effect of load is investigated. In addition, in order to suppress the effect of non-zero output resistance of the inverting voltage buffer, two compensation techniques are also introduced. The theoretical results are verified by SPICE simulations using PTM 90 nm level-7 CMOS process BSIM3v3 parameters, where +/- 0.45 V supply voltages are used. Moreover, the behavior of the proposed filter was also experimentally measured using readily available array transistors CD4007UB by Texas Instruments
A wideband linear tunable CDTA and its application in field programmable analogue array
This document is the Accepted Manuscript version of the following article: Hu, Z., Wang, C., Sun, J. et al. âA wideband linear tunable CDTA and its application in field programmable analogue arrayâ, Analog Integrated Circuits and Signal Processing, Vol. 88 (3): 465-483, September 2016. Under embargo. Embargo end date: 6 June 2017. The final publication is available at Springer via https://link.springer.com/article/10.1007%2Fs10470-016-0772-7 © Springer Science+Business Media New York 2016In this paper, a NMOS-based wideband low power and linear tunable transconductance current differencing transconductance amplifier (CDTA) is presented. Based on the NMOS CDTA, a novel simple and easily reconfigurable configurable analogue block (CAB) is designed. Moreover, using the novel CAB, a simple and versatile butterfly-shaped FPAA structure is introduced. The FPAA consists of six identical CABs, and it could realize six order current-mode low pass filter, second order current-mode universal filter, current-mode quadrature oscillator, current-mode multi-phase oscillator and current-mode multiplier for analog signal processing. The Cadence IC Design Tools 5.1.41 post-layout simulation and measurement results are included to confirm the theory.Peer reviewedFinal Accepted Versio
Low-Voltage High-Linearity Wideband Current Differencing Transconductance Amplifier and Its Application on Current-Mode Active Filter
A low-voltage high-linearity wideband current differencing transconductance ampliïŹer (CDTA) is presented in this paper. The CDTA consists of a current differencing circuit and a cross-coupling transconductance circuit. The PSPICE simulations of the proposed CDTA show a good performance: -3dB frequency bandwith is about 900 MHz, low power consumption is 2.48 mW, input current linear range is ±100 ”A and low current-input resistance is less than 20 âŠ, high current-output resistance is more than 3 MâŠ. PSpice simulations for a current-mode universal filter and a proposed high-order filter are also conducted, and the results verify the validity of the proposed CDTA
Current-mode Biquadratic Universal Filter Design with Two Terminal Unity Gain Cells
A grounded parallel lossy active inductor and two current-mode (CM) universal filters are presented in this paper. All the circuits use two voltage followers (VFs) and a current follower (CF). The parallel lossy active inductor includes a grounded capacitor which is attractive in integrated circuit (IC) technology. The CM universal filters have one input and standard three outputs such as band-pass (BP), low-pass (LP) and high-pass (HP) responses. All-pass and notch outputs can be obtained by adding extra one CF. Suggested structures in this paper can be constructed with commercially available active devices such as AD844s. Non-ideal gain and intrinsic X-terminal parasitic resistor effects are examined. Several computer simulations with SPICE program and experimental results by employing AD844s are drawn to verify theoretical ones
- âŠ