Modeling attack resistant strong physical unclonable functions : design and applications

Physical unclonable functions (PUFs) have great promise as hardware authentication primitives due to their physical unclonability, high resistance to reverse engineering, and difficulty of mathematical cloning. Strong PUFs are distinguished by an exponentially large number of challenge-response pairs (CRPs), in contrast with weak PUFs that have a smaller CRP set. Because the adversary cannot create an enumeration clone by recording all CRPs even when in physical possession of a PUF, strong PUFs enable secure direct authentication, that does not require cryptography and are thus attractive to low-energy and IoT applications. The first contribution of this dissertation is the design of a strong silicon PUF resistant to machine learning (ML) attacks. For a strong PUF to be an effective security primitive, the CRPs need to be unpredictable: given a set of known CRPs, it should be difficult to predict the unobserved CRPs. Otherwise, an adversary can succeed in an attack based on building a model of the PUF. Early strong PUFs have shown vulnerability to ML based attacks. We take advantage of the strongly nonlinear I -- V property of MOSFETs operating in subthreshold region to introduce a highly unpredictable PUF. The PUF, termed the subthreshold current array PUF (SCA-PUF), consists of a pair of two-dimensional transistor arrays, a circuit stabilizing the PUF output, and a low-offset comparator. The proposed 65-bit SCA-PUF is fabricated in a 130nm process and allows 2⁶⁵ CRPs. It consumes 68nW and 11pJ/bit while exhibiting high uniqueness, uniformity, and randomness. It achieves bit error rate (BER) of 5.8% for the temperature range of -20 to +80°C and supply voltage variation of ±10%. A calibration-based CRP selection method is developed to improve BER to 0.4% with a 42% loss of CRPs. When subjected to ML attacks, the prediction error stays over 40% on 10⁴ training points, which shows negligible loss in PUF unpredictability and about 100X higher resilience than the 65-bit arbiter PUF, 3-XOR PUF, and 3-XOR lightweight PUF. The second contribution is the application of a strong PUF in a secure key update scheme. Side-channel attacks on cryptographic implementations threaten system security via the loss of the secret key. The adversary can recover the key by analyzing side-channel analog behavior of a cryptographic device, such as power consumption. Fresh re-keying techniques aim to mitigate these attacks by regularly updating the key, so that the side-channel exposure of each key is minimized. Existing key update schemes generate fresh keys by processing a root key using arithmetic operations. Unfortunately, such techniques have been demonstrated to also be vulnerable to side-channel attacks. We propose a novel approach to fresh re-keying that replaces the arithmetic key update function with a strong PUF. We show that the security of our scheme hinges on the resilience of the PUF to a power side-channel attack and propose a realization based on the SCA-PUF. We show that the SCA-PUF is resistant to simple power analysis and a modeling attack that uses ML on the power side-channel. We target an insecure device and secure server encryption scenario for which we provide an efficient and scalable method of PUF enrollment. Finally, we develop an end-to-end encryption system with PUF-based fresh re-keying, using a reverse fuzzy extractor construction. The third contribution is the implementation of a strong PUF provably secure against ML attacks. The security is derived from cryptographic hardness of learning decryption functions of semantically secure public-key cryptosystems within the probably approximately correct framework. The proposed PUF, termed the lattice PUF, compactly realizes the decryption function of the learning-with-errors (LWE) public-key cryptosystem as the core block. The lattice PUF is lightweight and fully digital. It is constructed using a weak PUF, as a physically obfuscated key (POK), an LWE decryption function block, a pseudo-random number generator in the form of a linear-feedback shift register (LFSR), a self-incrementing counter, and a control block. The POK provides the secret key of the LWE decryption function. A fuzzy extractor is utilized to ensure stability of the POK. The proposed lattice PUF significantly improves upon a direct implementation of LWE decryption function in terms of challenge transfer cost by exploiting distributional relaxations allowed by recent work in space-efficient LWEs. Specifically, only a small challenge-seed is transmitted while the full-length challenge is re-generated by the LFSR resulting in a 100X reduction of communication cost. To prevent an active attack in which arbitrary challenges can be submitted, the value of a self-incrementing counter is embedded into the challenge seed. We construct a lattice PUF that realizes a challenge-response pair space of size 2¹³⁶, requires 1160 POK bits, and guarantees 128-bit ML resistance. Assuming a bit error rate of 5% for SRAM-based POK, 6.5K SRAM cells are needed. The PUF shows excellent uniformity, uniqueness, and reliability. We implement the PUF on a Spartan 6 FPGA. It requires only 45 slices for the lattice PUF proper and 233 slices for the fuzzy extractorElectrical and Computer Engineerin

Systematically Quantifying Cryptanalytic Non-Linearities in Strong PUFs

Physically Unclonable Functions~(PUFs) with large challenge space~(also called Strong PUFs) are promoted for usage in authentications and various other cryptographic and security applications. In order to qualify for these cryptographic applications, the Boolean functions realized by PUFs need to possess a high non-linearity~(NL). However, with a large challenge space~(usually $\geq 64$ bits), measuring NL by classical techniques like Walsh transformation is computationally infeasible. In this paper, we propose the usage of a heuristic-based measure called non-homomorphicity test which estimates the NL of Boolean functions with high accuracy in spite of not needing access to the entire challenge-response set. We also combine our analysis with a technique used in linear cryptanalysis, called Piling-up lemma, to measure the NL of popular PUF compositions. As a demonstration to justify the soundness of the metric, we perform extensive experimentation by first estimating the NL of constituent Arbiter/Bistable Ring PUFs using the non-homomorphicity test, and then applying them to quantify the same for their XOR compositions namely XOR Arbiter PUFs and XOR Bistable Ring PUF. Our findings show that the metric explains the impact of various parameter choices of these PUF compositions on the NL obtained and thus promises to be used as an important objective criterion for future efforts to evaluate PUF designs. While the framework is not representative of the machine learning robustness of PUFs, it can be a useful complementary tool to analyze the cryptanalytic strengths of PUF primitives

Improving Security and Reliability of Physical Unclonable Functions Using Machine Learning

Physical Unclonable Functions (PUFs) are promising security primitives for device authenti-cation and key generation. Due to the noise influence, reliability is an important performance metric of PUF-based authentication. In the literature, lots of efforts have been devoted to enhancing PUF reliability by using error correction methods such as error-correcting codes and fuzzy extractor. Ho-wever, one property that most of these prior works overlooked is the non-uniform distribution of PUF response across different bits. This wok proposes a two-step methodology to improve the reliability of PUF under noisy conditions. The first step involves acquiring the parameters of PUF models by using machine lear-ning algorithms. The second step then utilizes these obtained parameters to improve the reliability of PUFs by selectively choosing challenge-response pairs (CRPs) for authentication. Two distinct algorithms for improving the reliability of multiplexer (MUX) PUF, i.e., total delay difference thresholding and sensitive bits grouping, are presented. It is important to note that the methodology can be easily applied to other types of PUFs as well. Our experimental results show that the relia-bility of PUF-based authentication can be significantly improved by the proposed approaches. For example, in one experimental setting, the reliability of an MUX PUF is improved from 89.75% to 94.07% using total delay difference thresholding, while 89.30% of generated challenges are stored. As opposed to total delay difference thresholding, sensitive bits grouping possesses higher efficiency, as it can produce reliable CRPs directly. Our experimental results show that the reliability can be improved to 96.91% under the same setting, when we group 12 bits in the challenge vector of a 128-stage MUX PUF. Besides, because the actual noise varies greatly in different conditions, it is hard to predict the error of of each individual PUF response bit. This wok proposes a novel methodology to improve the efficiency of PUF response error correction based on error-rates. The proposed method first obtains the PUF model by using machine learning techniques, which is then used to predict the error-rates. Intuitively, we are inclined to tolerate errors in PUF response bits with relatively higher error-rates. Thus, we propose to treat different PUF response bits with different degrees of error tolerance, according to their estimated error-rates. Specifically, by assigning optimized weights, i.e., 0, 1, 2, 3, and infinity to PUF response bits, while a small portion of high error rates responses are truncated; the other responses are duplicated to a limited number of bits according to error-rates before error correction and a portion of low error-rates responses bypass the error correction as direct keys. The hardware cost for error correction can also be reduced by employing these methods. Response weighting is capable of reducing the false negative and false positive simultaneously. The entropy can also be controlled. Our experimental results show that the response weighting algorithm can reduce not only the false negative from 20.60% to 1.71%, but also the false positive rate from 1.26 × 10−21 to 5.38 × 10−22 for a PUF-based authentication with 127-bit response and 13-bit error correction. Besides, three case studies about the applications of the proposed algorithm are also discussed. Along with the rapid development of hardware security techniques, the revolutionary gro-wth of countermeasures or attacking methods developed by intelligent and adaptive adversaries have significantly complicated the ability to create secure hardware systems. Thus, there is a critical need to (re)evaluate existing or new hardware security techniques against these state-of-the-art attacking methods. With this in mind, this wok presents a novel framework for incorporating active learning techniques into hardware security field. We demonstrate that active learning can significantly im-prove the learning efficiency of PUF modeling attack, which samples the least confident and the most informative challenge-response pair (CRP) for training in each iteration. For example, our ex-perimental results show that in order to obtain a prediction error below 4%, 2790 CRPs are required in passive learning, while only 811 CRPs are required in active learning. The sampling strategies and detailed applications of PUF modeling attack under various environmental conditions are also discussed. When the environment is very noisy, active learning may sample a large number of mis-labeled CRPs and hence result in high prediction error. We present two methods to mitigate the contradiction between informative and noisy CRPs. At last, it is critical to design secure PUF, which can mitigate the countermeasures or modeling attacking from intelligent and adaptive adversaries. Previously, researchers devoted to hiding PUF information by pre- or post processing of PUF challenge/response. However, these methods are still subject to side-channel analysis based hybrid attacks. Methods for increasing the non-linearity of PUF structure, such as feedforward PUF, cascade PUF and subthreshold current PUF, have also been proposed. However, these methods significantly degrade the reliability. Based on the previous work, this work proposes a novel concept, noisy PUF, which achieves modeling attack resistance while maintaining a high degree of reliability for selected CRPs. A possible design of noisy PUF along with the corresponding experimental results is also presented

Stochastic Memory Devices for Security and Computing

With the widespread use of mobile computing and internet of things, secured communication and chip authentication have become extremely important. Hardware-based security concepts generally provide the best performance in terms of a good standard of security, low power consumption, and large-area density. In these concepts, the stochastic properties of nanoscale devices, such as the physical and geometrical variations of the process, are harnessed for true random number generators (TRNGs) and physical unclonable functions (PUFs). Emerging memory devices, such as resistive-switching memory (RRAM), phase-change memory (PCM), and spin-transfer torque magnetic memory (STT-MRAM), rely on a unique combination of physical mechanisms for transport and switching, thus appear to be an ideal source of entropy for TRNGs and PUFs. An overview of stochastic phenomena in memory devices and their use for developing security and computing primitives is provided. First, a broad classification of methods to generate true random numbers via the stochastic properties of nanoscale devices is presented. Then, practical implementations of stochastic TRNGs, such as hardware security and stochastic computing, are shown. Finally, future challenges to stochastic memory development are discussed

“Physical unclonable function”

The objective of the paper is to provide a complete introduction to the design of physical unclonable functions (PUF), devices used for applications such as low-cost authentication and generation of cryptographic keys. The distinctive feature of PUFs is that, being devices that take advantage of process variations, it is not possible to create a copy of the circuit that exactly replicates the behavior of the starting PUF, so it is intrinsically robust to any invasive physical attacks. Integrated circuit authentication and hardware encryption protocols play an important role in cyber security...Este documento proporciona una introducción completa sobre el diseño de seguridad, aplicaciones de autentificación y generación de claves de una PUF (Physical Unclonable Function). La característica distintiva de los PUF es que no se puede crear una copia del circuito, ya que es imposible controlar las variaciones del proceso de fabricación. La autenticación de circuitos integrados y protocolos criptográficos seguros basados en hardware proporcionan un papel importante en la seguridad del hardware..

In-situ and In-field temperature and transistor BTI sensing techniques with microprocessor level implementation

In modern deep-scaled CMOS technologies, various silicon-related pitfalls present challenges to the long-term performance of microprocessors. Such challenges include (1) local hot spots, which breach the thermal limitations of a microprocessor, and (2) transistor aging, especially NBTI, which degrades transistor threshold voltage, ultimately threatening the reliability of the entire memory block. In previous systems, the dummy circuit was placed next to the subject, where the dummy was frequently analyzed, and the readout was used to infer the condition of the target. Due to rapidly changing ambient conditions (e.g., temperature and voltage) and the potential scale of the target dimensions, such metrics may not accurately represent the condition of the target. Moreover, such temperature sensors and canary circuits occupy a significant area. Therefore, it would be highly preferable to monitor the target circuit in-situ, i.e., to sense the precise transistor at operation. It is also important to achieve an accurate sensing metric. When the temperature is analyzed, the readout should account for voltage and process variations. While sensing the aging degradation, the readout should account for voltage and temperature fluctuations. This would allow testing during in-field operation, while the circuits achieve area-efficiency. This research had two stages. One result of the first stage was a silicon test chip that was a compact temperature sensor. It involved a family of PTAT+CTAT sensor front-ends that unitized only 6 to 8 conventional CMOS logic devices, yielding a smaller sized chip. The sensor demonstrates accuracy within the target and achieves a 14.3x smaller foot print than preceding published designs. The second product of the first stage was a PMOS aging sensor used in 6T SRAM circuits. The test chip has a real SRAM array, integrated with the proposed PMOS NBTI sensor. It can sense real PMOS NBTI effects in any bit cell (in-situ) and provide robust readings of temperature and voltage (in-field). Intensive aging tests validated the proposed sensing technique. The second stage was focused on implementing the in-situ and in-field sensing techniques in a real processor. The MIPS microprocessor had a modified instruction cache (I$) and instruction set architecture. With the addition of new instruction aging sensing and minor modification of the circuits, the processor can execute aging sensing opportunistically to evaluate the aging level of its instruction cache. A software framework was developed and verified to estimate the retention voltage of the instruction cache over the lifetime of the chip. An area-efficient SoC was developed that could transform the instruction cache into an ambient temperature sensor. It had a physically unclonable function (PUF), and it was built with an area-saving technique similar to the earlier work. This thesis has four chapters. They are presented in chronological and they are aligned with the research described above

Comprehensive Designs of Innovate Secure Hardware Devices against Machine Learning Attacks and Power Analysis Attacks

Hardware security is an innovate subject oriented from growing demands of cybersecurity and new information vulnerabilities from physical leakages on hardware devices. However, the mainstream of hardware manufacturing industry is still taking benefits of products and the performance of chips as priority, restricting the design of hardware secure countermeasures under a compromise to a finite expense of overheads. Consider the development trend of hardware industries and state-of-the-art researches of architecture designs, this dissertation proposes some new physical unclonable function (PUF) designs as countermeasures to side-channel attacks (SCA) and machine learning (ML) attacks simultaneously. Except for the joint consideration of hardware and software vulnerabilities, those designs also take efficiencies and overhead problems into consideration, making the new-style of PUF more possible to be merged into current chips as well as their design concepts. While the growth of artificial intelligence and machine-learning techniques dominate the researching trends of Internet of things (IoT) industry, some mainstream architectures of neural networks are implemented as hypothetical attacking model, whose results are used as references for further lifting the performance, the security level, and the efficiency in lateral studies. In addition, a study of implementation of neural networks on hardware designs is proposed, this realized the initial attempt to introduce AI techniques to the designs of voltage regulation (VR). All aforementioned works are demonstrated to be of robustness to threats with corresponding power attack tests or ML attack tests. Some conceptional models are proposed in the last of the dissertation as future plans so as to realize secure on-chip ML models and hardware countermeasures to hybrid threats