Nonlinear Dynamic Inversion Baseline Control Law: Flight-Test Results for the Full-scale Advanced Systems Testbed F/A-18 Airplane

A model reference nonlinear dynamic inversion control law has been developed to provide a baseline controller for research into simple adaptive elements for advanced flight control laws. This controller has been implemented and tested in a hardware-in-the-loop simulation and in flight. The flight results agree well with the simulation predictions and show good handling qualities throughout the tested flight envelope with some noteworthy deficiencies highlighted both by handling qualities metrics and pilot comments. Many design choices and implementation details reflect the requirements placed on the system by the nonlinear flight environment and the desire to keep the system as simple as possible to easily allow the addition of the adaptive elements. The flight-test results and how they compare to the simulation predictions are discussed, along with a discussion about how each element affected pilot opinions. Additionally, aspects of the design that performed better than expected are presented, as well as some simple improvements that will be suggested for follow-on work

Modeling and nonlinear adaptive control of an aerial manipulation system

Autonomous aerial robots have become an essential part of many civilian and military applications. The workspace and agility of these vehicles motivated great research interest resulting in various studies addressing their control architectures and mechanical configurations. Increasing autonomy enabled them to perform tasks such as surveillance, inspection and remote sensing in hazardous and challenging environments. The ongoing research promises further contributions to the society, in both theory and practice. To furthermore extend their vast applications, aerial robots are equipped with the tools to enable physical interaction with the environment. These tasks represent a great challenge due to the technological limitations as well as the lack of sophisticated methods necessary for the control of the system to perform desired operations in an efficient and stable manner. Modeling and control problem of an aerial manipulation is still an open research topic with many studies addressing these issues from different perspectives. This thesis deals with the nonlinear adaptive control of an aerial manipulation system (AMS). The system consists of a quadrotor equipped with a 2 degrees of freedom (DOF) manipulator. The complete modeling of the system is done using the Euler-Lagrange method. A hierarchical nonlinear control structure which consists of outer and inner control loops has been utilized. Model Reference Adaptive Controller (MRAC) is designed for the outer loop where the required command signals are generated to force the quadrotor to move on a reference trajectory in the presence of mass uncertainties and reaction forces coming from the manipulator. For the inner loop, the attitude dynamics of the quadrotor and the joint dynamics of the 2-DOF robotic arm are considered as a fully actuated 5-DOF unified part of the AMS. Nonlinear adaptive control has been utilized for the low-level controller where the changes in inertias have been considered. The proposed controller is tested on a high fidelity AMS model in the presence of uncertainties, wind disturbances and measurement noise, and satisfactory trajectory tracking performance with improved robustness is achieved

Complexity and Pilot Workload Metrics for the Evaluation of Adaptive Flight Controls on a Full Scale Piloted Aircraft

Flight research has shown the effectiveness of adaptive flight controls for improving aircraft safety and performance in the presence of uncertainties. The National Aeronautics and Space Administration's (NASA)'s Integrated Resilient Aircraft Control (IRAC) project designed and conducted a series of flight experiments to study the impact of variations in adaptive controller design complexity on performance and handling qualities. A novel complexity metric was devised to compare the degrees of simplicity achieved in three variations of a model reference adaptive controller (MRAC) for NASA's F-18 (McDonnell Douglas, now The Boeing Company, Chicago, Illinois) Full-Scale Advanced Systems Testbed (Gen-2A) aircraft. The complexity measures of these controllers are also compared to that of an earlier MRAC design for NASA's Intelligent Flight Control System (IFCS) project and flown on a highly modified F-15 aircraft (McDonnell Douglas, now The Boeing Company, Chicago, Illinois). Pilot comments during the IRAC research flights pointed to the importance of workload on handling qualities ratings for failure and damage scenarios. Modifications to existing pilot aggressiveness and duty cycle metrics are presented and applied to the IRAC controllers. Finally, while adaptive controllers may alleviate the effects of failures or damage on an aircraft's handling qualities, they also have the potential to introduce annoying changes to the flight dynamics or to the operation of aircraft systems. A nuisance rating scale is presented for the categorization of nuisance side-effects of adaptive controllers

Reverse Engineering Biological Control Systems for Applications in Process Control.

The main emphasis of this dissertation is the development of nonlinear control strategies based on biological control systems. Commonly utilized biological control schemes have been studied in order to reverse engineer the important concepts for applications in process control. This approach has led to the development of a nonlinear habituating control strategy and nonlinear model reference adaptive control schemes. Habituating control is a controller design strategy for nonlinear systems with more manipulated inputs than controlled outputs. Nonlinear control laws that provide input-output linearization while simultaneously minimizing the cost of affecting control are derived. Local stability analysis shows the controller can provide a simple solution to singularity and non-minimum phase problems. A direct adaptive control strategy for a class of single-input, single-output non-linear systems is presented. The major advantage is that a detailed dynamic non-linear model is not required for controller design. Unknown controller functions in the associated input-output linearizing control law are approximated using locally supported radial basis functions. Lyapunov stability analysis is used to derive parameter update laws which ensure the state vector remains bounded and the plant output asymptotically tracks the output of a linear reference model. A nonlinear model reference adaptive control strategy in which a linear model (or multiple linear models) is embedded within the nonlinear controller is presented. The nonlinear control law is constructed by embedding linear controller gains derived from models obtained using standard linear system identification techniques within the associated input-output linearizing control law. Higher-order controller functions are approximated with radial basis functions. Lyapunov stability analysis is used to derive stable parameter update laws. The major disadvantage of the previous techniques is computational expense. Two modifications have been developed. First, the effective dimension is reduced by applying nonlinear principal component analysis to the state variable data obtained from open-loop tests. This allows basis functions to be placed in a lower dimensional space than the original state space. Second, the total number of basis functions is fixed a priori and an algorithm which adds/prunes basis function centers to surround the current operating point on-line is utilized

Adaptive Commanding of Control Moment Gyroscopes with Backlash

The existence of backlash in mechanical systems provides significant challenges when attempting to control these systems to a high degree of precision. The imperfect meshing of gear or belt teeth deteriorates the performance of position controllers and tracking of small commands, producing unacceptable steady-state offsets, increased rise and settling times. Agile spacecraft often use control moment gyroscopes (CMGs) equipped with gear trains to efficiently provide torque for the fine attitude adjustments used in docking and precision stabilization maneuvers. A theoretical examination and a practical model is developed to study the effectiveness of both proportional-integral (PI) and model referencing adaptive controllers (MRAC) in overcoming the non-linearity introduced by gear lash. A Lyapunov analysis of the system’s equations of motion provides knowledge of its convergence, the tracking of ideal trajectories, and the rejections of disturbances. The objective is to create an adaptive control law that rejects the non-linearity and maintains acceptable performance with small torque commands. This control law is then validated in Simulink using a discontinuous backlash model

Nonlinear Adaptive Dynamic Inversion Control for Variable Stability Small Unmanned Aircraft Systems

In-flight simulation and variable stability aircraft provide useful capabilities for flight controls development such as testing control laws for new aircraft earlier, identification of adverse conditions such as pilot-induced oscillations, and handling qualities research. While these capabilities are useful they are not without cost. The expense and support activities needed to safely operate in-flight simulators has limited their availability to military test pilot schools and a few private companies. Modern computing power allows the implementation of advanced flight control systems on size, weight, and power constrained platforms such as small uninhabited aerial systems used by universities and research organizations. This thesis aims to develop a flight control system that brings in-flight simulation capability to these platforms. Two control systems based on model reference and L₁ adaptive augmentation of baseline nonlinear dynamic inversion controllers are proposed and evaluated against a command augmentation system design and in-flight simulation cases for a variety of linear and nonlinear models. Simulation results demonstrate that both proposed control architectures are able to meet the control objectives for tracking and in-flight simulation and performance and stability robustness in the presence of severe turbulence

Active Sampling-based Binary Verification of Dynamical Systems

Nonlinear, adaptive, or otherwise complex control techniques are increasingly relied upon to ensure the safety of systems operating in uncertain environments. However, the nonlinearity of the resulting closed-loop system complicates verification that the system does in fact satisfy those requirements at all possible operating conditions. While analytical proof-based techniques and finite abstractions can be used to provably verify the closed-loop system's response at different operating conditions, they often produce conservative approximations due to restrictive assumptions and are difficult to construct in many applications. In contrast, popular statistical verification techniques relax the restrictions and instead rely upon simulations to construct statistical or probabilistic guarantees. This work presents a data-driven statistical verification procedure that instead constructs statistical learning models from simulated training data to separate the set of possible perturbations into "safe" and "unsafe" subsets. Binary evaluations of closed-loop system requirement satisfaction at various realizations of the uncertainties are obtained through temporal logic robustness metrics, which are then used to construct predictive models of requirement satisfaction over the full set of possible uncertainties. As the accuracy of these predictive statistical models is inherently coupled to the quality of the training data, an active learning algorithm selects additional sample points in order to maximize the expected change in the data-driven model and thus, indirectly, minimize the prediction error. Various case studies demonstrate the closed-loop verification procedure and highlight improvements in prediction error over both existing analytical and statistical verification techniques.Comment: 23 page

Biohybrid control of general linear systems using the adaptive filter model of cerebellum

© 2015 Wilson, Assaf, Pearson, Rossiter, Dean, Anderson and Porrill. The adaptive filter model of the cerebellar microcircuit has been successfully applied to biological motor control problems, such as the vestibulo-ocular reflex (VOR), and to sensory processing problems, such as the adaptive cancelation of reafferent noise. It has also been successfully applied to problems in robotics, such as adaptive camera stabilization and sensor noise cancelation. In previous applications to inverse control problems, the algorithm was applied to the velocity control of a plant dominated by viscous and elastic elements. Naive application of the adaptive filter model to the displacement (as opposed to velocity) control of this plant results in unstable learning and control. To be more generally useful in engineering problems, it is essential to remove this restriction to enable the stable control of plants of any order. We address this problem here by developing a biohybrid model reference adaptive control (MRAC) scheme, which stabilizes the control algorithm for strictly proper plants. We evaluate the performance of this novel cerebellar-inspired algorithm with MRAC scheme in the experimental control of a dielectric electroactive polymer, a class of artificial muscle. The results show that the augmented cerebellar algorithm is able to accurately control the displacement response of the artificial muscle. The proposed solution not only greatly extends the practical applicability of the cerebellar-inspired algorithm, but may also shed light on cerebellar involvement in a wider range of biological control tasks

Automatic Flight Control Systems

The history of flight control is inseparably linked to the history of aviation itself. Since the early days, the concept of automatic flight control systems has evolved from mechanical control systems to highly advanced automatic fly-by-wire flight control systems which can be found nowadays in military jets and civil airliners. Even today, many research efforts are made for the further development of these flight control systems in various aspects. Recent new developments in this field focus on a wealth of different aspects. This book focuses on a selection of key research areas, such as inertial navigation, control of unmanned aircraft and helicopters, trajectory control of an unmanned space re-entry vehicle, aeroservoelastic control, adaptive flight control, and fault tolerant flight control. This book consists of two major sections. The first section focuses on a literature review and some recent theoretical developments in flight control systems. The second section discusses some concepts of adaptive and fault-tolerant flight control systems. Each technique discussed in this book is illustrated by a relevant example

Underactuated Attitude Control of a CubeSat Using Cold Gas Thrusters and Nonlinear Control Methods

Impulsive thrusters on small satellites, such as CubeSats, are typically used for attitude control. However, to become more agile, small CubeSats must also look to propulsion systems utilizing impulsive thrusters, such as cold-gas, for translational maneuvers. The combined thrust vector is often misaligned with the system\u27s center of mass resulting in a disturbance torque. This must be counteracted by either an attitude determination and control system (ADCS), additional thrusters, or a control method to keep the satellite\u27s attitude at or near equilibrium. Nonlinearities generated by the impulsive maneuvers are overcome via control techniques explored in this research to include on-off control, sliding mode control, and model reference adaptive control (MRAC). These methods were then compared to a baseline test without thruster modulation, where the reaction wheels must de-saturate prior to continuing the maneuver. For a 1.5 m/s delta-v maneuver, the nonlinear control techniques completed the maneuver nearly 100 times faster than the baseline, while improving pointing accuracy throughout the burn by up to 5%