Increasing Transparency and Presence of Teleoperation Systems Through Human-Centered Design

Teleoperation allows a human to control a robot to perform dexterous tasks in remote, dangerous, or unreachable environments. A perfect teleoperation system would enable the operator to complete such tasks at least as easily as if he or she was to complete them by hand. This ideal teleoperator must be perceptually transparent, meaning that the interface appears to be nearly nonexistent to the operator, allowing him or her to focus solely on the task environment, rather than on the teleoperation system itself. Furthermore, the ideal teleoperation system must give the operator a high sense of presence, meaning that the operator feels as though he or she is physically immersed in the remote task environment. This dissertation seeks to improve the transparency and presence of robot-arm-based teleoperation systems through a human-centered design approach, specifically by leveraging scientific knowledge about the human motor and sensory systems. First, this dissertation aims to improve the forward (efferent) teleoperation control channel, which carries information from the human operator to the robot. The traditional method of calculating the desired position of the robot\u27s hand simply scales the measured position of the human\u27s hand. This commonly used motion mapping erroneously assumes that the human\u27s produced motion identically matches his or her intended movement. Given that humans make systematic directional errors when moving the hand under conditions similar to those imposed by teleoperation, I propose a new paradigm of data-driven human-robot motion mappings for teleoperation. The mappings are determined by having the human operator mimic the target robot as it autonomously moves its arm through a variety of trajectories in the horizontal plane. Three data-driven motion mapping models are described and evaluated for their ability to correct for the systematic motion errors made in the mimicking task. Individually-fit and population-fit versions of the most promising motion mapping model are then tested in a teleoperation system that allows the operator to control a virtual robot. Results of a user study involving nine subjects indicate that the newly developed motion mapping model significantly increases the transparency of the teleoperation system. Second, this dissertation seeks to improve the feedback (afferent) teleoperation control channel, which carries information from the robot to the human operator. We aim to improve a teleoperation system a teleoperation system by providing the operator with multiple novel modalities of haptic (touch-based) feedback. We describe the design and control of a wearable haptic device that provides kinesthetic grip-force feedback through a geared DC motor and tactile fingertip-contact-and-pressure and high-frequency acceleration feedback through a pair of voice-coil actuators mounted at the tips of the thumb and index finger. Each included haptic feedback modality is known to be fundamental to direct task completion and can be implemented without great cost or complexity. A user study involving thirty subjects investigated how these three modalities of haptic feedback affect an operator\u27s ability to control a real remote robot in a teleoperated pick-and-place task. This study\u27s results strongly support the utility of grip-force and high-frequency acceleration feedback in teleoperation systems and show more mixed effects of fingertip-contact-and-pressure feedback

Information acquisition using eye-gaze tracking for person-following with mobile robots

In the effort of developing natural means for human-robot interaction (HRI), signifcant amount of research has been focusing on Person-Following (PF) for mobile robots. PF, which generally consists of detecting, recognizing and following people, is believed to be one of the required functionalities for most future robots that share their environments with their human companions. Research in this field is mostly directed towards fully automating this functionality, which makes the challenge even more tedious. Focusing on this challenge leads research to divert from other challenges that coexist in any PF system. A natural PF functionality consists of a number of tasks that are required to be implemented in the system. However, in more realistic life scenarios, not all the tasks required for PF need to be automated. Instead, some of these tasks can be operated by human operators and therefore require natural means of interaction and information acquisition. In order to highlight all the tasks that are believed to exist in any PF system, this paper introduces a novel taxonomy for PF. Also, in order to provide a natural means for HRI, TeleGaze is used for information acquisition in the implementation of the taxonomy. TeleGaze was previously developed by the authors as a means of natural HRI for teleoperation through eye-gaze tracking. Using TeleGaze in the aid of developing PF systems is believed to show the feasibility of achieving a realistic information acquisition in a natural way

Sensory Manipulation as a Countermeasure to Robot Teleoperation Delays: System and Evidence

In the field of robotics, robot teleoperation for remote or hazardous environments has become increasingly vital. A major challenge is the lag between command and action, negatively affecting operator awareness, performance, and mental strain. Even with advanced technology, mitigating these delays, especially in long-distance operations, remains challenging. Current solutions largely focus on machine-based adjustments. Yet, there's a gap in using human perceptions to improve the teleoperation experience. This paper presents a unique method of sensory manipulation to help humans adapt to such delays. Drawing from motor learning principles, it suggests that modifying sensory stimuli can lessen the perception of these delays. Instead of introducing new skills, the approach uses existing motor coordination knowledge. The aim is to minimize the need for extensive training or complex automation. A study with 41 participants explored the effects of altered haptic cues in delayed teleoperations. These cues were sourced from advanced physics engines and robot sensors. Results highlighted benefits like reduced task time and improved perceptions of visual delays. Real-time haptic feedback significantly contributed to reduced mental strain and increased confidence. This research emphasizes human adaptation as a key element in robot teleoperation, advocating for improved teleoperation efficiency via swift human adaptation, rather than solely optimizing robots for delay adjustment.Comment: Submitted to Scientific Report

A demonstration and comparative analysis of haptic performance using a Gough-Stewart platform as a wearable haptic feedback device

In many hazardous work environments, contact tasks ranging from manufacturing to disassembly to emergency response are performed by industrial manipulators. Due to the hazardous and complex nature of these environments, teleoperation is often employed. When such is the case, the operator is left to interpret a large amount of data during task completion due to the complexity of modern robotic systems and the possible complexity of the tasks. This information is usually processed visually but can lead to sensory overload. To mitigate this, the information processing can also be distributed through other modes of sensory such as auditory or haptic. The University of Texas at Austin's TeMoto hands-free interface reduces the burden on the operator of commanding remote systems by enabling the use of gestural and verbal commands to complete a range of tasks, but the removal of a mechanical interactive device from the operator interface complicates the inclusion of haptic feedback. In this work, a standalone Gough-Stewart platform previously configured as a wearable haptic feedback device for the Nuclear and Applied Robotics Group at the University of Texas at Austin provides real-time haptic feedback to the unconstrained hand(s) of the operator. In doing so, this haptic interface can be employed with the intent of enhancing situational awareness and minimizing operator stress by imparting forces and torques to the user based on those imparted on the end-effector of the industrial manipulator. While multiple technical issues and human factor issues must be addressed, this effort focuses on integrating the system and evaluating its performance for various industrial manipulator designs and sensor modalities. After testing various digital signal processing techniques, functionality was demonstrated among one series-elastic and two rigid industrial manipulators, each with different force/torque data acquisition characteristics and a comparative analysis in haptic performance was performed. Furthermore, it was demonstrated with the TeMoto hands-free teleoperation system. Overall, the demonstrations and experiments performed in this work prove the system to be a viable, hardware agnostic means of haptic feedback and a strong basis for future effortsMechanical Engineerin

Expert-in-the-Loop Multilateral Telerobotics for Haptics-Enabled Motor Function and Skills Development

Among medical robotics applications are Robotics-Assisted Mirror Rehabilitation Therapy (RAMRT) and Minimally-Invasive Surgical Training (RAMIST) that extensively rely on motor function development. Haptics-enabled expert-in-the-loop motor function development for such applications is made possible through multilateral telerobotic frameworks. While several studies have validated the benefits of haptic interaction with an expert in motor learning, contradictory results have also been reported. This emphasizes the need for further in-depth studies on the nature of human motor learning through haptic guidance and interaction. The objective of this study was to design and evaluate expert-in-the-loop multilateral telerobotic frameworks with stable and human-safe control loops that enable adaptive “hand-over-hand” haptic guidance for RAMRT and RAMIST. The first prerequisite for such frameworks is active involvement of the patient or trainee, which requires the closed-loop system to remain stable in the presence of an adaptable time-varying dominance factor. To this end, a wave-variable controller is proposed in this study for conventional trilateral teleoperation systems such that system stability is guaranteed in the presence of a time-varying dominance factor and communication delay. Similar to other wave-variable approaches, the controller is initially developed for the Velocity-force Domain (VD) based on the well-known passivity assumption on the human arm in VD. The controller can be applied straightforwardly to the Position-force Domain (PD), eliminating position-error accumulation and position drift, provided that passivity of the human arm in PD is addressed. However, the latter has been ignored in the literature. Therefore, in this study, passivity of the human arm in PD is investigated using mathematical analysis, experimentation as well as user studies involving 12 participants and 48 trials. The results, in conjunction with the proposed wave-variables, can be used to guarantee closed-loop PD stability of the supervised trilateral teleoperation system in its classical format. The classic dual-user teleoperation architecture does not, however, fully satisfy the requirements for properly imparting motor function (skills) in RAMRT (RAMIST). Consequently, the next part of this study focuses on designing novel supervised trilateral frameworks for providing motor learning in RAMRT and RAMIST, each customized according to the requirements of the application. The framework proposed for RAMRT includes the following features: a) therapist-in-the-loop mirror therapy; b) haptic feedback to the therapist from the patient side; c) assist-as-needed therapy realized through an adaptive Guidance Virtual Fixture (GVF); and d) real-time task-independent and patient-specific motor-function assessment. Closed-loop stability of the proposed framework is investigated using a combination of the Circle Criterion and the Small-Gain Theorem. The stability analysis addresses the instabilities caused by: a) communication delays between the therapist and the patient, facilitating haptics-enabled tele- or in-home rehabilitation; and b) the integration of the time-varying nonlinear GVF element into the delayed system. The platform is experimentally evaluated on a trilateral rehabilitation setup consisting of two Quanser rehabilitation robots and one Quanser HD2 robot. The framework proposed for RAMIST includes the following features: a) haptics-enabled expert-in-the-loop surgical training; b) adaptive expertise-oriented training, realized through a Fuzzy Interface System, which actively engages the trainees while providing them with appropriate skills-oriented levels of training; and c) task-independent skills assessment. Closed-loop stability of the architecture is analyzed using the Circle Criterion in the presence and absence of haptic feedback of tool-tissue interactions. In addition to the time-varying elements of the system, the stability analysis approach also addresses communication delays, facilitating tele-surgical training. The platform is implemented on a dual-console surgical setup consisting of the classic da Vinci surgical system (Intuitive Surgical, Inc., Sunnyvale, CA), integrated with the da Vinci Research Kit (dVRK) motor controllers, and the dV-Trainer master console (Mimic Technology Inc., Seattle, WA). In order to save on the expert\u27s (therapist\u27s) time, dual-console architectures can also be expanded to accommodate simultaneous training (rehabilitation) for multiple trainees (patients). As the first step in doing this, the last part of this thesis focuses on the development of a multi-master/single-slave telerobotic framework, along with controller design and closed-loop stability analysis in the presence of communication delays. Various parts of this study are supported with a number of experimental implementations and evaluations. The outcomes of this research include multilateral telerobotic testbeds for further studies on the nature of human motor learning and retention through haptic guidance and interaction. They also enable investigation of the impact of communication time delays on supervised haptics-enabled motor function improvement through tele-rehabilitation and mentoring