Hybrid Microstrip/Slotline Ultra-Wideband Bandpass Filter with a Controllable Notch Band

An ultra-wideband (UWB) bandpass filter (BPF) with a controllable notch band is presented by using hybrid microstrip/slotline structure. Firstly, a slotline resonator with symmetrically loaded stubs is fed by two microstrip lines to produce a UWB bandpass filtering response. Secondly, a microstrip triangular loop resonator is externally loaded over the slotline, and a notch band is introduced in the UWB passband. The notch band is determined by the perimeter of the loop resonator. Thirdly, two patches are added as the perturbation element to the corners of the microstrip resonator to excite a pair of degenerate modes. Bandwidth of the notch band can be tuned by properly selecting the patch size. Circuit model for the microstrip resonator loaded slotline is given and studied. Finally, the filter is designed, simulated, and measured. Measured results have agreed well with the simulated ones, demonstrating that a UWB filter with a controllable notch band has been realized

Passive Components for Ultra-Wide Band (UWB) Applications

UWB technology brings the convenience and mobility of wireless communications to very high-speed interconnects in the home and office due to the precision capabilities combined with the low power. This makes it ideal for certain radio frequency sensitive environments such as hospitals and healthcare as well as radars. UWB intrusion-detection radar is used for detecting through the wall and also used for security with fuse avoidance radar, precision locating and tracking (using distance measurements between radios), and precision time-of-arrival-based localization approaches. The FCC issued a ruling in 2002 that allowed intentional UWB emissions in the frequency range between 3.1 and 10.6 GHz, subject to certain restrictions for the emission power spectrum. Other definitions for ultra-wideband range of frequency are also used such as any device that has 500 MHz bandwidth or fractional bandwidth greater than 25% is considered an UWB enable high data rate to be transferred with a very low power that does not exceed −41.3 dBm

Passive Planar Microwave Devices

The aim of this book is to highlight some recent advances in microwave planar devices. The development of planar technologies still generates great interest because of their many applications in fields as diverse as wireless communications, medical instrumentation, remote sensing, etc. In this book, particular interest has been focused on an electronically controllable phase shifter, wireless sensing, a multiband textile antenna, a MIMO antenna in microstrip technology, a miniaturized spoof plasmonic antipodal Vivaldi antenna, a dual-band balanced bandpass filter, glide-symmetric structures, a transparent multiband antenna for vehicle communications, a multilayer bandpass filter with high selectivity, microwave planar cutoff probes, and a wideband transition from microstrip to ridge empty substrate integrated waveguide

Defected Ground Structure: Fundamentals, Analysis, and Applications in Modern Wireless Trends

Slots or defects integrated on the ground plane of microwave planar circuits are referred to as Defected Ground Structure. DGS is adopted as an emerging technique for improving the various parameters of microwave circuits, that is, narrow bandwidth, cross-polarization, low gain, and so forth. This paper presents an introduction and evolution of DGS and how DGS is different from former technologies: PBG and EBG. A basic concept behind the DGS technology and several theoretical techniques for analysing the Defected Ground Structure are discussed. Several applications of DGS in the field of filters, planar waveguides, amplifiers, and antennas are presented

UWB Technology

Ultra Wide Band (UWB) technology has attracted increasing interest and there is a growing demand for UWB for several applications and scenarios. The unlicensed use of the UWB spectrum has been regulated by the Federal Communications Commission (FCC) since the early 2000s. The main concern in designing UWB circuits is to consider the assigned bandwidth and the low power permitted for transmission. This makes UWB circuit design a challenging mission in today's community. Various circuit designs and system implementations are published in this book to give the reader a glimpse of the state-of-the-art examples in this field. The book starts at the circuit level design of major UWB elements such as filters, antennas, and amplifiers; and ends with the complete system implementation using such modules

Design, Modelling and Implementation of Several Multi-Standard High Performance Single-Wideband and Multi-Wideband Microwave Planar Filters

The objectives of this work are to review, investigate and model the microwave planar filters of the modern wireless communication system. The recent main stream of microwave filters are classified and discussed separately. Various microwave filters with detailed applications are investigated in terms of their geometrical structures and operational performances. A comprehensive theoretical study of microwave filters is presented. The main types of microwave filters including the basic low-pass filters such as Butterworth and Chebyshev filters are fully analysed and described in detail. The transformation from low-pass prototype filters to high-pass filters, band-pass filters and band-stop filters are illustrated and introduced. Research work on stepped impedance resonator (SIR) and asymmetric stepped impedance resonator (ASIR) structure is presented. The characteristics of λg/4, λg/2 and λg (λg is the guided wavelength of the fundamental frequency in the free space) type SIR resonators, and the characteristic of asymmetric SIR resonator are categorized and investigated. Based on the content mentioned above, novel multi-standard high performance asymmetric stepped impedance resonator single-wideband and dual-wideband filters with wide stopbands are proposed. The methodologies to realize wide passband and wide stop-band filters are detailed. In addition, multi-standard high performance triplewideband, quadruple-wideband and quint-wideband filters are suggested and studied. The measurement results for all prototype filters agree well with the theoretical predictions and simulated results from Ansoft HFSS software. The featured broad bandwidths over single/multiple applicable frequency bands and the high performances of the proposed filters make them very promising for applications in future multistandard wireless communication

Design and analysis of wideband passive microwave devices using planar structures

A selected volume of work consisting of 84 published journal papers is presented to demonstrate the contributions made by the author in the last seven years of his work at the University of Queensland in the area of Microwave Engineering. The over-arching theme in the author’s works included in this volume is the engineering of novel passive microwave devices that are key components in the building of any microwave system. The author’s contribution covers innovative designs, design methods and analyses for the following key devices and associated systems: Wideband antennas and associated systems Band-notched and multiband antennas Directional couplers and associated systems Power dividers and associated systems Microwave filters Phase shifters Much of the motivation for the work arose from the desire to contribute to the engineering o

Novel miniature microwave quasi-elliptical function bandpass filters with wideband harmonic suppression

Filters are integral components in all wireless communication systems, and their function is to permit predefined band of frequencies into the system and reject all other signals. The ever-growing demand in the use of the radio frequency (RF) spectrum for new applications has resulted in the need for high performance microwave filters with strict requirements on both inband and out-of-band characteristics. High selectivity, high rejection, low loss and extremely wide spurious-free performance are required for both transmitter and receiver channels. In addition, these devices need to be highly compact, easy to integrate within transceivers and should be amenable to low cost manufacturing. High selectivity is essential to enable the guard band between adjacent channels to be reduced thus improving the efficiency of the RF spectrum and hence increasing the capacity of the system. A low insertion-loss, high return-loss and small group-delay in the passband are necessary to minimize signal degradation. A wide stopband is necessary to suppress spurious passbands outside the filter’s bandwidth that may allow spurious emissions from modulation process (harmonic, parasitic, intermodulation and frequency conversion products) and interfere with other systems. The EMC Directive 89/336/EEC mandates that all electronic equipment must comply with the applicable EN specification for EMI. This thesis presents the research work that has resulted in the development of innovative and compact microstrip bandpass filters that fulfil the above stringent requirements for wireless communication systems. In fact, the proposed highly compact planar microstrip filters provide an alternative solution for existing and next generation of wireless communications systems. In particular, the proposed filters exhibit a low-loss and quasi-elliptic function response that is normally only possible with filter designs using waveguides and high temperature superconductors. The selectivity of the filters has been improved by inserting a pair of transmission zeros between the passband edges, and implementing notched rejection bands in the filter’s frequency response to widen its stopband performance. The filter structures have been analysed theoretically and modelled by using Keysight Technologies’ Advanced Design System (ADS™) and Momentum® software. The dissertation is essentially composed of four main sections. In the first section, several compact and quasi-elliptic function bandpass filter structures are proposed and theoretically analysed. Selectivity and stopband performance of these filters is enhanced by loading the input and output feed-lines with inductive stubs that introduce transmission zeros at specified frequencies in the filter’s frequency response. This technique is shown to provide a sharp 3-dB roll-off and steep selectivity skirt with high out-of-band rejection over a wide frequency span. In addition, the 3-dB fractional bandwidth of the filters is shown to be controllable by manipulating the filter’s geometric parameters. Traditional microwave bandpass filters are designed using quarter-wavelength distributed transmission-line resonators that are either end-coupled or side-coupled. The sharpness of the filter response is determined by the number of resonators employed which degrades the filter’s passband loss performance. This results in a filter with a significantly larger footprint which precludes miniaturization. To circumvent these drawbacks the second section describes the development of a novel and compact wideband bandpass filter with the desired characteristics. The quasi-elliptic function filter comprises open-loop resonators that are coupled to each other using a stub loaded resonator. The proposed filter is shown to achieve a wideband 3-dB fractional bandwidth of 23% with much better loss performance, sharp skirt selectivity and very wide rejection bandwidth. The third section describes the investigation of novel ultra-wideband (UWB) microstrip bandpass filter designs. Parametric study enabled the optimization of the filter’s performance which was verified through practical measurements. The proposed filters meet the stringent characteristics required by modern communications systems, i.e. the filters are highly compact and miniature even when fabricated on a low dielectric constant substrate, possess a sharp quasi-elliptic function bandpass response with low passband insertion-loss, and ultra-wide stopband performance. With the rapid development of multi-band operation in modern and next generation wireless communication systems, there is a great demand for single frequency discriminating devices that can operate over multiple frequency bands to facilitate miniaturization. These multi-band bandpass filters need to be physically small, have low insertion-loss, high return-loss, and excellent selectivity. In the fourth section two miniature microstrip dual-band and triple-band bandpass filter designs are explored. A detailed parametric study was conducted to fully understand how the geometric parameters of the filters affected their performance. The optimized filters were fabricated and measured to validate their performance

Advanced RF/microwave filtering circuits for wireless communications and radar applications.

The recent rapid development in modern communication systems has presented some constraints caused by the introduced noises, as well as further requirements of low costs and miniature designs. Such noises are overcome using efficient designs of filtering devices which are essential components in many satellite, radar and mobile communication systems. As a result, balanced or differential filtering components have recently received increasing attention. A wideband microstrip balanced bandpass filter based on modified stub line approach is presented in here. The proposed idea of extended transmission lines (TLs) at the input and output (I/O) ports enables for very good stopband rejection and common-mode suppression. On the other hand, the recently introduced multilayer liquid crystal polymer (LCP) material and fabrication technique are exclusively applied in this work for adapting the potential solutions offered within. Therefore, a comprehensive in-house fabrication process has been developed and extensively illustrated in this thesis starting from mask preparation covering the entire procedure up to producing the final piece of output. As a demonstrator of the potential capability of multilayer LCP technology, a novel miniaturized ultra-wideband (UWB) balun with self-packaging is introduced in this study. The broadside coupled stripline structure is adopted in this work to realize UWB performance and TEM mode which results in excellent amplitude and phase balances. In turn, a novel compact UWB multilayer balanced bandpass filter using LCP technology is also presented in this thesis. The design utilizes the transversal signal-interference concept for realizing an outstanding common-mode suppression while constructed in a stripline configuration. All of the designs covered in this thesis are initially simulated using CAD tools to be then validated by measurements of fabricated prototypes