Blind user detection in doubly-dispersive DS/CDMA channels

In this work, we consider the problem of detecting the presence of a new user in a direct-sequence/code-division-multiple-access (DS/CDMA) system with a doubly-dispersive fading channel, and we propose a novel blind detection strategy which only requires knowledge of the spreading code of the user to be detected, but no prior information as to the time-varying channel impulse response and the structure of the multiaccess interference. The proposed detector has a bounded constant false alarm rate (CFAR) under the design assumptions, while providing satisfactory detection performance even in the presence of strong cochannel interference and high user mobility.Comment: Accepted for publication on IEEE Transactions on Signal Processin

Performance improvements in wireless CDMA communications utilizing adaptive antenna arrays

This dissertation studies applications of adaptive antenna arrays and space-time adaptive processing (STAP) in wireless code-division multiple-access (CDMA) communications. The work addresses three aspects of the CDMA communications problems: (I) near-far resistance, (2) reverse link, (3) forward link. In each case, adaptive arrays are applied and their performance is investigated. The near-far effect is a well known problem which affects the reverse link of CDMA communication systems. The near-far resistance of STAP is analyzed for two processing methods: maximal ratio combining and optimum combining. It. is shown that while maximal ratio combining is not near-far resistant, optimum combining is near-far resistant when the number of cochannel interferences is less than the system dimensionality. The near-far effect can be mitigated by accurate power control at the mobile station. With practical limitations, the received signal power at a base station from a power-controlled user is a random variable clue to power control error. The statistical model of signal-to-interference ratio at the antenna array output of a base station is presented, and the outage probability of the CDMA reverse link is analyzed while considering Rayleigh fading, voice activity and power control error. New analytical expressions are obtained and demonstrated by computer simulations. For the application of an adaptive antenna. array at the forward link, a receiver architecture is suggested for the mobile station that utilizes a small two-antenna array For interference suppression. Such a receiver works well only when the channel vector of the desired signal is known. The identifying spreading codes (as in IS-95A for example) are used to provide an adaptive channel vector estimate, and control the beam steering weight, hence improve the receiver performance. Numerical results are presented to illustrate the operation of the proposed receiver model and the improvement in performance and capacity

On the modeling of WCDMA system performance with propagation data

The aim of this study was to develop calculation methods for estimating the most important system level performance characteristics of the WCDMA radio network (i.e. network capacity and coverage) in the presence of interference from various sources. The calculation methods described in this work enable the fast design of radio systems with a reasonable degree of accuracy, where different system parameters, propagation conditions and networks as well as frequency scenarios can be easily tested. The work also includes the development and verification of a propagation model for a microcellular environment. Traditionally, system level performance figures have been retrieved using system simulations where the radio network has been modeled as accurately as possible. This has included base stations and mobile stations, propagation models, traffic models and mobility models. Various radio resource management (RRM) algorithms, such as power controls and handovers have also been modeled. However, these system simulations are very complex and time consuming and typically the models are difficult to modify. The idea behind this work is to use the main statistical parameters retrieved from accurate, case specific propagation models and to use these statistics as input for the developed analytical radio network models. When used as output from these analytical models we are able to obtain the performance measures of the network. The specific application area for the developed methods is the evaluation of the effect of the interference from the adjacent frequency channels. Adjacent channel interference decreases the efficiency of the usage of the electromagnetic spectrum i.e. the spectral efficiency. The aim of a radio system design is to ensure that the reduction in the spectral efficiency is as low as possible. This interference may originate from the same or a different radio system and from the same or another operator's network. The strength of this interference is dependent on the system parameters and the network layout. The standard questions regarding adjacent system interference between different operators' network are what guard band is needed between the radio carriers in order to maintain the quality of the network or what are the main mobile and network parameters, such as adjacent channel emission levels or adjacent channel selectivity, required in order to achieve satisfactory network performance. With the developed method proposed here it is possible to answer these questions with reasonable accuracy. One important aspect of network performance is the radio wave propagation environment for which the radio systems are designed. This thesis presents methods evaluating radio wave propagation, especially for cases where the base station antenna is below the rooftops, i.e. in the case of microcellular network environments. The developed microcellular propagation model has been developed for network planning purposes and it has been verified using numerous field propagation measurements. The model can be used in cases where the mobile station is located either indoors or outdoors.reviewe

Improved Predictive Power Control Algorithms to Increase CDMA System Capacity

In  this  paper  capacity  of  CDMA  system  is  evaluated  using  an improved  algorithm  of  channel  prediction-based  power  control  in  Rayleigh fading  channel environments. One  of the most serious problems which degrades the performance of power control algorithm is the effect of feedback delay. To overcome the effect of feedback delay, power control algorithm relies on channel prediction techniques, which utilize the correlation property of the past  channel measurements.  In  CDMA  power  control,  however,  the  correlation  property  of channel  measurements  is destroyed  because the  transmit power  is continuously updated  for  each  power  control  interval.  In  order  to  restore  the  correlation property of the channel,  the past  channel measurements  are compensated  for by the  same  factors  that  were  given  by  power  updating  for   each  power  control interval. The prediction algorithm in this paper is proposed using the least mean square  (LMS) technique. The result shows that the capacity of CDMA systems increase  significantly  when  the  improved  predictive  algorithm  is  used. Numerical evaluation shows that CDMA capacity increases by more than 40 % for fixed step algorithm and more than 50 % for variable step algorithm when the proposed algorithm is employed.

Spatio-Temporal processing for Optimum Uplink-Downlink WCDMA Systems

The capacity of a cellular system is limited by two different phenomena, namely multipath fading and multiple access interference (MAl). A Two Dimensional (2-D) receiver combats both of these by processing the signal both in the spatial and temporal domain. An ideal 2-D receiver would perform joint space-time processing, but at the price of high computational complexity. In this research we investigate computationally simpler technique termed as a Beamfom1er-Rake. In a Beamformer-Rake, the output of a beamfom1er is fed into a succeeding temporal processor to take advantage of both the beamformer and Rake receiver. Wireless service providers throughout the world are working to introduce the third generation (3G) and beyond (3G) cellular service that will provide higher data rates and better spectral efficiency. Wideband COMA (WCDMA) has been widely accepted as one of the air interfaces for 3G. A Beamformer-Rake receiver can be an effective solution to provide the receivers enhanced capabilities needed to achieve the required performance of a WCDMA system. We consider three different Pilot Symbol Assisted (PSA) beamforming techniques, Direct Matrix Inversion (DMI), Least-Mean Square (LMS) and Recursive Least Square (RLS) adaptive algorithms. Geometrically Based Single Bounce (GBSB) statistical Circular channel model is considered, which is more suitable for array processing, and conductive to RAKE combining. The performances of the Beam former-Rake receiver are evaluated in this channel model as a function of the number of antenna elements and RAKE fingers, in which are evaluated for the uplink WCDMA system. It is shown that, the Beamformer-Rake receiver outperforms the conventional RAKE receiver and the conventional beamformer by a significant margin. Also, we optimize and develop a mathematical formulation for the output Signal to Interference plus Noise Ratio (SINR) of a Beam former-Rake receiver. In this research, also, we develop, simulate and evaluate the SINR and Signal to Noise Ratio (Et!Nol performances of an adaptive beamforming technique in the WCDMA system for downlink. The performance is then compared with an omnidirectional antenna system. Simulation shows that the best perfom1ance can be achieved when all the mobiles with same Angle-of-Arrival (AOA) and different distance from base station are formed in one beam

A study of UMTS terrestrial radio access performance

This thesis considers the performance evaluation of third generation radio networks, in particular UMTS Terrestrial Radio Access (UTRA). First, the performance evaluation methods are presented. The typical capacity of UTRA is estimated using those methods and a few solutions are evaluated to improve the capacity and coverage. The thesis further studies the effect of base station synchronization on the performance of UTRA time division duplex mode. The performance evaluation is based on the combination of theoretical calculations, link and system level simulations, and laboratory and field measurements. It is shown that these different evaluation methods give similar results and – when combined together – they can be used for the radio network development purposes. The simulation results indicate that the typical WCDMA, i.e. UTRA frequency division duplex mode, macro cell capacity is between 600 and 1000 kbps per sector per 5 MHz. The capacity is sensitive to the environment and to the transceiver performance. The results further show that user bit rates up to 2 Mbps can be provided locally for packet data with the basic Rake receiver, but not for full coverage circuit switched connections in macro cells. The following performance enhancement techniques are evaluated in this thesis: soft combining of packet retransmissions, base station multiuser detection and 4-branch base station receiver diversity. The link level simulations show that soft combining can provide a gain up to 2.0 dB, which can be used to increase the capacity up to 60 %. The performance of base station multiuser detection is evaluated with link and system level simulations. It is shown that the studied sub-optimal multiuser detector is able to remove 60-70 % of the intra-cell interference. That gain can be utilized to improve the uplink capacity by 50-100 % or the coverage by 1-2 dB. The performance of 4-branch antenna diversity is evaluated in the simulations and in the field measurements. The results show that the average coverage gain of 4-branch diversity with two separate cross-polarized antennas is 3 dB compared to 2-branch diversity with one cross-polarized antenna. The synchronization requirements of UTRA time division duplex base stations are studied with system simulations. The results show that synchronization is a key requirement for time division duplex operation, especially for the uplink performance. The study indicates that co-location of different operators' base stations is feasible in time division duplex operation only if the two networks are synchronized and if an identical split between uplink and downlink is used.reviewe