On Complexity, Energy- and Implementation-Efficiency of Channel Decoders

Future wireless communication systems require efficient and flexible baseband receivers. Meaningful efficiency metrics are key for design space exploration to quantify the algorithmic and the implementation complexity of a receiver. Most of the current established efficiency metrics are based on counting operations, thus neglecting important issues like data and storage complexity. In this paper we introduce suitable energy and area efficiency metrics which resolve the afore-mentioned disadvantages. These are decoded information bit per energy and throughput per area unit. Efficiency metrics are assessed by various implementations of turbo decoders, LDPC decoders and convolutional decoders. New exploration methodologies are presented, which permit an appropriate benchmarking of implementation efficiency, communications performance, and flexibility trade-offs. These exploration methodologies are based on efficiency trajectories rather than a single snapshot metric as done in state-of-the-art approaches.Comment: Submitted to IEEE Transactions on Communication

Software Defined Applications in Cellular and Optical Networks

abstract: Small wireless cells have the potential to overcome bottlenecks in wireless access through the sharing of spectrum resources. A novel access backhaul network architecture based on a Smart Gateway (Sm-GW) between the small cell base stations, e.g., LTE eNBs, and the conventional backhaul gateways, e.g., LTE Servicing/Packet Gateways (S/P-GWs) has been introduced to address the bottleneck. The Sm-GW flexibly schedules uplink transmissions for the eNBs. Based on software defined networking (SDN) a management mechanism that allows multiple operator to flexibly inter-operate via multiple Sm-GWs with a multitude of small cells has been proposed. This dissertation also comprehensively survey the studies that examine the SDN paradigm in optical networks. Along with the PHY functional split improvements, the performance of Distributed Converged Cable Access Platform (DCCAP) in the cable architectures especially for the Remote-PHY and Remote-MACPHY nodes has been evaluated. In the PHY functional split, in addition to the re-use of infrastructure with a common FFT module for multiple technologies, a novel cross functional split interaction to cache the repetitive QAM symbols across time at the remote node to reduce the transmission rate requirement of the fronthaul link has been proposed.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

System Development and VLSI Implementation of High Throughput and Hardware Efficient Polar Code Decoder

Polar code is the first channel code which is provable to achieve the Shannon capacity. Additionally, it has a very good performance in terms of low error floor. All these merits make it a potential candidate for the future standard of wireless communication or storage system. Polar code is received increasing research interest these years. However, the hardware implementation of hardware decoder still has not meet the expectation of practical applications, no matter from neither throughput aspect nor hardware efficient aspect. This dissertation presents several system development approaches and hardware structures for three widely known decoding algorithms. These algorithms are successive cancellation (SC), list successive cancellation (LSC) and belief propagation (BP). All the efforts are in order to maximize the throughput meanwhile minimize the hardware cost. Throughput centric successive cancellation (TCSC) decoder is proposed for SC decoding. By introducing the concept of constituent code, the decoding latency is significantly reduced with a negligible decoding performance loss. However, the specifically designed computation unites dramatically increase the hardware cost, and how to handle the conventional polar code sets and constituent codes sets makes the hardware implementation more complicated. By exploiting the natural property of conventional SC decoder, datapaths for decoding constituent codes are compatibly built via computation units sharing technique. This approach does not incur additional hardware cost expect some multiplexer logic, but can significantly increase the decoding throughput. Other techniques such as pre-computing and gate-level optimization are used as well in order to further increase the decoding throughput. A specific designed partial sum generator (PSG) is also investigated in this dissertation. This PSG is hardware efficient and timing compatible with proposed TCSC decoder. Additionally, a polar code construction scheme with constituent codes optimization is also presents. This construction scheme aims to reduce the constituent codes based SC decoding latency. Results show that, compared with the state-of-art decoder, TCSC can achieve at least 60% latency reduction for the codes with length n = 1024. By using Nangate FreePDK 45nm process, TCSC decoder can reach throughput up to 5.81 Gbps and 2.01 Gbps for (1024, 870) and (1024, 512) polar code, respectively. Besides, with the proposed construction scheme, the TCSC decoder generally is able to further achieve at least around 20% latency deduction with an negligible gain loss. Overlapped List Successive Cancellation (OLSC) is proposed for LSC decoding as a design approach. LSC decoding has a better performance than LS decoding at the cost of hardware consumption. With such approach, the l (l > 1) instances of successive cancellation (SC) decoder for LSC with list size l can be cut down to only one. This results in a dramatic reduction of the hardware complexity without any decoding performance loss. Meanwhile, approaches to reduce the latency associated with the pipeline scheme are also investigated. Simulation results show that with proposed design approach the hardware efficiency is increased significantly over the recently proposed LSC decoders. Express Journey Belief Propagation (XJBP) is proposed for BP decoding. This idea origins from extending the constituent codes concept from SC to BP decoding. Express journey refers to the datapath of specific constituent codes in the factor graph, which accelerates the belief information propagation speed. The XJBP decoder is able to achieve 40.6% computational complexity reduction with the conventional BP decoding. This enables an energy efficient hardware implementation. In summary, all the efforts to optimize the polar code decoder are presented in this dissertation, supported by the careful analysis, precise description, extensively numerical simulations, thoughtful discussion and RTL implementation on VLSI design platforms

System Development and VLSI Implementation of High Throughput and Hardware Efficient Polar Code Decoder

Polar code is the first channel code which is provable to achieve the Shannon capacity. Additionally, it has a very good performance in terms of low error floor. All these merits make it a potential candidate for the future standard of wireless communication or storage system. Polar code is received increasing research interest these years. However, the hardware implementation of hardware decoder still has not meet the expectation of practical applications, no matter from neither throughput aspect nor hardware efficient aspect. This dissertation presents several system development approaches and hardware structures for three widely known decoding algorithms. These algorithms are successive cancellation (SC), list successive cancellation (LSC) and belief propagation (BP). All the efforts are in order to maximize the throughput meanwhile minimize the hardware cost. Throughput centric successive cancellation (TCSC) decoder is proposed for SC decoding. By introducing the concept of constituent code, the decoding latency is significantly reduced with a negligible decoding performance loss. However, the specifically designed computation unites dramatically increase the hardware cost, and how to handle the conventional polar code sets and constituent codes sets makes the hardware implementation more complicated. By exploiting the natural property of conventional SC decoder, datapaths for decoding constituent codes are compatibly built via computation units sharing technique. This approach does not incur additional hardware cost expect some multiplexer logic, but can significantly increase the decoding throughput. Other techniques such as pre-computing and gate-level optimization are used as well in order to further increase the decoding throughput. A specific designed partial sum generator (PSG) is also investigated in this dissertation. This PSG is hardware efficient and timing compatible with proposed TCSC decoder. Additionally, a polar code construction scheme with constituent codes optimization is also presents. This construction scheme aims to reduce the constituent codes based SC decoding latency. Results show that, compared with the state-of-art decoder, TCSC can achieve at least 60% latency reduction for the codes with length n = 1024. By using Nangate FreePDK 45nm process, TCSC decoder can reach throughput up to 5.81 Gbps and 2.01 Gbps for (1024, 870) and (1024, 512) polar code, respectively. Besides, with the proposed construction scheme, the TCSC decoder generally is able to further achieve at least around 20% latency deduction with an negligible gain loss. Overlapped List Successive Cancellation (OLSC) is proposed for LSC decoding as a design approach. LSC decoding has a better performance than LS decoding at the cost of hardware consumption. With such approach, the l (l > 1) instances of successive cancellation (SC) decoder for LSC with list size l can be cut down to only one. This results in a dramatic reduction of the hardware complexity without any decoding performance loss. Meanwhile, approaches to reduce the latency associated with the pipeline scheme are also investigated. Simulation results show that with proposed design approach the hardware efficiency is increased significantly over the recently proposed LSC decoders. Express Journey Belief Propagation (XJBP) is proposed for BP decoding. This idea origins from extending the constituent codes concept from SC to BP decoding. Express journey refers to the datapath of specific constituent codes in the factor graph, which accelerates the belief information propagation speed. The XJBP decoder is able to achieve 40.6% computational complexity reduction with the conventional BP decoding. This enables an energy efficient hardware implementation. In summary, all the efforts to optimize the polar code decoder are presented in this dissertation, supported by the careful analysis, precise description, extensively numerical simulations, thoughtful discussion and RTL implementation on VLSI design platforms

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

Final report on the evaluation of RRM/CRRM algorithms

Deliverable public del projecte EVERESTThis deliverable provides a definition and a complete evaluation of the RRM/CRRM algorithms selected in D11 and D15, and evolved and refined on an iterative process. The evaluation will be carried out by means of simulations using the simulators provided at D07, and D14.Preprin

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin