2,248 research outputs found
Nonlinearity and Noise Effects in Multi-level Signal Millimeter-Wave over Fiber Transmission using Single- and Dual-Wavelength Modulation
We transmit multilevel quadrature amplitude modulation (QAM) data-IEEE 802.16 schemes-at 20 MSps and an orthogonal frequency-division multiplexing (OFDM) 802.11 g signal (54 Mbps) with a 25 GHz millimeter-wave over fiber system, which employs a dual wavelength source, over 20 km of single mode fiber. Downlink data transmission is successfully demonstrated over both optical and wireless (up to 12 m) paths with good error vector magnitude. An analysis of two different schemes, in which data is applied to one (single) and both (dual) of the wavelengths of a dual wavelength source, is carried out. The system performance is analyzed through simulation and a good match with experimental results is obtained. The analysis investigates the impact of Mach-Zehnder modulator (MZM) and RF amplifier nonlinearity and various noise sources, such as laser relative intensity noise, amplified spontaneous emission, thermal, and shot noise. A comparison of single carrier QAM IEEE 802.16 and OFDM in terms of their sensitivity to the distortions from MZM and RF amplifier nonlinearity is also presented
Space-Time Signal Design for Multilevel Polar Coding in Slow Fading Broadcast Channels
Slow fading broadcast channels can model a wide range of applications in
wireless networks. Due to delay requirements and the unavailability of the
channel state information at the transmitter (CSIT), these channels for many
applications are non-ergodic. The appropriate measure for designing signals in
non-ergodic channels is the outage probability. In this paper, we provide a
method to optimize STBCs based on the outage probability at moderate SNRs.
Multilevel polar coded-modulation is a new class of coded-modulation techniques
that benefits from low complexity decoders and simple rate matching. In this
paper, we derive the outage optimality condition for multistage decoding and
propose a rule for determining component code rates. We also derive an upper
bound on the outage probability of STBCs for designing the
set-partitioning-based labelling. Finally, due to the optimality of the
outage-minimized STBCs for long codes, we introduce a novel method for the
joint optimization of short-to-moderate length polar codes and STBCs
Designing Power-Efficient Modulation Formats for Noncoherent Optical Systems
We optimize modulation formats for the additive white Gaussian noise channel
with a nonnegative input constraint, also known as the intensity-modulated
direct detection channel, with and without confining them to a lattice
structure. Our optimization criteria are the average electrical and optical
power. The nonnegativity input signal constraint is translated into a conical
constraint in signal space, and modulation formats are designed by sphere
packing inside this cone. Some remarkably dense packings are found, which yield
more power-efficient modulation formats than previously known. For example, at
a spectral efficiency of 1 bit/s/Hz, the obtained modulation format offers a
0.86 dB average electrical power gain and 0.43 dB average optical power gain
over the previously best known modulation formats to achieve a symbol error
rate of 10^-6. This modulation turns out to have a lattice-based structure. At
a spectral efficiency of 3/2 bits/s/Hz and to achieve a symbol error rate of
10^-6, the modulation format obtained for optimizing the average electrical
power offers a 0.58 dB average electrical power gain over the best
lattice-based modulation and 2.55 dB gain over the best previously known
format. However, the modulation format optimized for average optical power
offers a 0.46 dB average optical power gain over the best lattice-based
modulation and 1.35 dB gain over the best previously known format.Comment: Submitted to Globecom 201
Self-concatenated code design and its application in power-efficient cooperative communications
In this tutorial, we have focused on the design of binary self-concatenated coding schemes with the help of EXtrinsic Information Transfer (EXIT) charts and Union bound analysis. The design methodology of future iteratively decoded self-concatenated aided cooperative communication schemes is presented. In doing so, we will identify the most important milestones in the area of channel coding, concatenated coding schemes and cooperative communication systems till date and suggest future research directions
MIMO-aided near-capacity turbo transceivers: taxonomy and performance versus complexity
In this treatise, we firstly review the associated Multiple-Input Multiple-Output (MIMO) system theory and review the family of hard-decision and soft-decision based detection algorithms in the context of Spatial Division Multiplexing (SDM) systems. Our discussions culminate in the introduction of a range of powerful novel MIMO detectors, such as for example Markov Chain assisted Minimum Bit-Error Rate (MC-MBER) detectors, which are capable of reliably operating in the challenging high-importance rank-deficient scenarios, where there are more transmitters than receivers and hence the resultant channel-matrix becomes non-invertible. As a result, conventional detectors would exhibit a high residual error floor. We then invoke the Soft-Input Soft-Output (SISO) MIMO detectors for creating turbo-detected two- or three-stage concatenated SDM schemes and investigate their attainable performance in the light of their computational complexity. Finally, we introduce the powerful design tools of EXtrinsic Information Transfer (EXIT)-charts and characterize the achievable performance of the diverse near- capacity SISO detectors with the aid of EXIT charts
Reliable Physical Layer Network Coding
When two or more users in a wireless network transmit simultaneously, their
electromagnetic signals are linearly superimposed on the channel. As a result,
a receiver that is interested in one of these signals sees the others as
unwanted interference. This property of the wireless medium is typically viewed
as a hindrance to reliable communication over a network. However, using a
recently developed coding strategy, interference can in fact be harnessed for
network coding. In a wired network, (linear) network coding refers to each
intermediate node taking its received packets, computing a linear combination
over a finite field, and forwarding the outcome towards the destinations. Then,
given an appropriate set of linear combinations, a destination can solve for
its desired packets. For certain topologies, this strategy can attain
significantly higher throughputs over routing-based strategies. Reliable
physical layer network coding takes this idea one step further: using
judiciously chosen linear error-correcting codes, intermediate nodes in a
wireless network can directly recover linear combinations of the packets from
the observed noisy superpositions of transmitted signals. Starting with some
simple examples, this survey explores the core ideas behind this new technique
and the possibilities it offers for communication over interference-limited
wireless networks.Comment: 19 pages, 14 figures, survey paper to appear in Proceedings of the
IEE
- …