Integrated circuit outlier identification by multiple parameter correlation

Semiconductor manufacturers must ensure that chips conform to their specifications before they are shipped to customers. This is achieved by testing various parameters of a chip to determine whether it is defective or not. Separating defective chips from fault-free ones is relatively straightforward for functional or other Boolean tests that produce a go/no-go type of result. However, making this distinction is extremely challenging for parametric tests. Owing to continuous distributions of parameters, any pass/fail threshold results in yield loss and/or test escapes. The continuous advances in process technology, increased process variations and inaccurate fault models all make this even worse. The pass/fail thresholds for such tests are usually set using prior experience or by a combination of visual inspection and engineering judgment. Many chips have parameters that exceed certain thresholds but pass Boolean tests. Owing to the imperfect nature of tests, to determine whether these chips (called "outliers") are indeed defective is nontrivial. To avoid wasted investment in packaging or further testing it is important to screen defective chips early in a test flow. Moreover, if seemingly strange behavior of outlier chips can be explained with the help of certain process parameters or by correlating additional test data, such chips can be retained in the test flow before they are proved to be fatally flawed. In this research, we investigate several methods to identify true outliers (defective chips, or chips that lead to functional failure) from apparent outliers (seemingly defective, but fault-free chips). The outlier identification methods in this research primarily rely on wafer-level spatial correlation, but also use additional test parameters. These methods are evaluated and validated using industrial test data. The potential of these methods to reduce burn-in is discussed

Technology and layout-related testing of static random-access memories

Static random-access memories (SRAMs) exhibit faults that are electrical in nature. Functional and electrical testing are performed to diagnose faulty operation. These tests are usually designed from simple fault models that describe the chip interface behavior without a thorough analysis of the chip layout and technology. However, there are certain technology and layout-related defects that are internal to the chip and are mostly time-dependent in nature. The resulting failures may or may not seriously degrade the input/output interface behavior. They may show up as electrical faults (such as a slow access fault) and/or functional faults (such as a pattern sensitive fault). However, these faults cannot be described properly with the functional fault models because these models do not take timing into account. Also, electrical fault models that describe merely the input/output interface behavior are inadequate to characterize every possible defect in the basic SRAM cell. Examples of faults produced by these defects are: (a) static data loss, (b) abnormally high currents drawn from the power supply, etc. Generating tests for such faults often requires a thorough understanding and analysis of the circuit technology and layout. In this article, we shall examine ways to characterize and test such faults. We shall divide such faults into two categories depending on the types of SRAMs they effect—silicon SRAMs and GaAs SRAMs.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/43015/1/10836_2004_Article_BF00972519.pd

Ingress of threshold voltage-triggered hardware trojan in the modern FPGA fabric–detection methodology and mitigation

The ageing phenomenon of negative bias temperature instability (NBTI) continues to challenge the dynamic thermal management of modern FPGAs. Increased transistor density leads to thermal accumulation and propagates higher and non-uniform temperature variations across the FPGA. This aggravates the impact of NBTI on key PMOS transistor parameters such as threshold voltage and drain current. Where it ages the transistors, with a successive reduction in FPGA lifetime and reliability, it also challenges its security. The ingress of threshold voltage-triggered hardware Trojan, a stealthy and malicious electronic circuit, in the modern FPGA, is one such potential threat that could exploit NBTI and severely affect its performance. The development of an effective and efficient countermeasure against it is, therefore, highly critical. Accordingly, we present a comprehensive FPGA security scheme, comprising novel elements of hardware Trojan infection, detection, and mitigation, to protect FPGA applications against the hardware Trojan. Built around the threat model of a naval warship’s integrated self-protection system (ISPS), we propose a threshold voltage-triggered hardware Trojan that operates in a threshold voltage region of 0.45V to 0.998V, consuming ultra-low power (10.5nW), and remaining stealthy with an area overhead as low as 1.5% for a 28 nm technology node. The hardware Trojan detection sub-scheme provides a unique lightweight threshold voltage-aware sensor with a detection sensitivity of 0.251mV/nA. With fixed and dynamic ring oscillator-based sensor segments, the precise measurement of frequency and delay variations in response to shifts in the threshold voltage of a PMOS transistor is also proposed. Finally, the FPGA security scheme is reinforced with an online transistor dynamic scaling (OTDS) to mitigate the impact of hardware Trojan through run-time tolerant circuitry capable of identifying critical gates with worst-case drain current degradation

Techniques for Improving Security and Trustworthiness of Integrated Circuits

The integrated circuit (IC) development process is becoming increasingly vulnerable to malicious activities because untrusted parties could be involved in this IC development flow. There are four typical problems that impact the security and trustworthiness of ICs used in military, financial, transportation, or other critical systems: (i) Malicious inclusions and alterations, known as hardware Trojans, can be inserted into a design by modifying the design during GDSII development and fabrication. Hardware Trojans in ICs may cause malfunctions, lower the reliability of ICs, leak confidential information to adversaries or even destroy the system under specifically designed conditions. (ii) The number of circuit-related counterfeiting incidents reported by component manufacturers has increased significantly over the past few years with recycled ICs contributing the largest percentage of the total reported counterfeiting incidents. Since these recycled ICs have been used in the field before, the performance and reliability of such ICs has been degraded by aging effects and harsh recycling process. (iii) Reverse engineering (RE) is process of extracting a circuit’s gate-level netlist, and/or inferring its functionality. The RE causes threats to the design because attackers can steal and pirate a design (IP piracy), identify the device technology, or facilitate other hardware attacks. (iv) Traditional tools for uniquely identifying devices are vulnerable to non-invasive or invasive physical attacks. Securing the ID/key is of utmost importance since leakage of even a single device ID/key could be exploited by an adversary to hack other devices or produce pirated devices. In this work, we have developed a series of design and test methodologies to deal with these four challenging issues and thus enhance the security, trustworthiness and reliability of ICs. The techniques proposed in this thesis include: a path delay fingerprinting technique for detection of hardware Trojans, recycled ICs, and other types counterfeit ICs including remarked, overproduced, and cloned ICs with their unique identifiers; a Built-In Self-Authentication (BISA) technique to prevent hardware Trojan insertions by untrusted fabrication facilities; an efficient and secure split manufacturing via Obfuscated Built-In Self-Authentication (OBISA) technique to prevent reverse engineering by untrusted fabrication facilities; and a novel bit selection approach for obtaining the most reliable bits for SRAM-based physical unclonable function (PUF) across environmental conditions and silicon aging effects

Prognostics and Health Management of Electronics by Utilizing Environmental and Usage Loads

Prognostics and health management (PHM) is a method that permits the reliability of a system to be evaluated in its actual application conditions. Thus by determining the advent of failure, procedures can be developed to mitigate, manage and maintain the system. Since, electronic systems control most systems today and their reliability is usually critical for system reliability, PHM techniques are needed for electronics. To enable prognostics, a methodology was developed to extract load-parameters required for damage assessment from irregular time-load data. As a part of the methodology an algorithm that extracts cyclic range and means, ramp-rates, dwell-times, dwell-loads and correlation between load parameters was developed. The algorithm enables significant reduction of the time-load data without compromising features that are essential for damage estimation. The load-parameters are stored in bins with a-priori calculated (optimal) bin-width. The binned data is then used with Gaussian kernel function for density estimation of the load-parameter for use in damage assessment and prognostics. The method was shown to accurately extract the desired load-parameters and enable condensed storage of load histories, thus improving resource efficiency of the sensor nodes. An approach was developed to assess the impact of uncertainties in measurement, model-input, and damage-models on prognostics. The approach utilizes sensitivity analysis to identify the dominant input variables that influence the model-output, and uses the distribution of measured load-parameters and input variables in a Monte-Carlo simulation to provide a distribution of accumulated damage. Using regression analysis of the accumulated damage distributions, the remaining life is then predicted with confidence intervals. The proposed method was demonstrated using an experimental setup for predicting interconnect failures on electronic board subjected to field conditions. A failure precursor based approach was developed for remaining life prognostics by analyzing resistance data in conjunction with usage temperature loads. Using the data from the PHM experiment, a model was developed to estimate the resistance based on measured temperature values. The difference between actual and estimated resistance value in time-domain were analyzed to predict the onset and progress of interconnect degradation. Remaining life was predicted by trending several features including mean-peaks, kurtosis, and 95% cumulative-values of the resistance-drift distributions

Solid State Circuits Technologies

The evolution of solid-state circuit technology has a long history within a relatively short period of time. This technology has lead to the modern information society that connects us and tools, a large market, and many types of products and applications. The solid-state circuit technology continuously evolves via breakthroughs and improvements every year. This book is devoted to review and present novel approaches for some of the main issues involved in this exciting and vigorous technology. The book is composed of 22 chapters, written by authors coming from 30 different institutions located in 12 different countries throughout the Americas, Asia and Europe. Thus, reflecting the wide international contribution to the book. The broad range of subjects presented in the book offers a general overview of the main issues in modern solid-state circuit technology. Furthermore, the book offers an in depth analysis on specific subjects for specialists. We believe the book is of great scientific and educational value for many readers. I am profoundly indebted to the support provided by all of those involved in the work. First and foremost I would like to acknowledge and thank the authors who worked hard and generously agreed to share their results and knowledge. Second I would like to express my gratitude to the Intech team that invited me to edit the book and give me their full support and a fruitful experience while working together to combine this book

Dynamic Partial Reconfiguration for Dependable Systems

Moore’s law has served as goal and motivation for consumer electronics manufacturers in the last decades. The results in terms of processing power increase in the consumer electronics devices have been mainly achieved due to cost reduction and technology shrinking. However, reducing physical geometries mainly affects the electronic devices’ dependability, making them more sensitive to soft-errors like Single Event Transient (SET) of Single Event Upset (SEU) and hard (permanent) faults, e.g. due to aging effects. Accordingly, safety critical systems often rely on the adoption of old technology nodes, even if they introduce longer design time w.r.t. consumer electronics. In fact, functional safety requirements are increasingly pushing industry in developing innovative methodologies to design high-dependable systems with the required diagnostic coverage. On the other hand commercial off-the-shelf (COTS) devices adoption began to be considered for safety-related systems due to real-time requirements, the need for the implementation of computationally hungry algorithms and lower design costs. In this field FPGA market share is constantly increased, thanks to their flexibility and low non-recurrent engineering costs, making them suitable for a set of safety critical applications with low production volumes. The works presented in this thesis tries to face new dependability issues in modern reconfigurable systems, exploiting their special features to take proper counteractions with low impacton performances, namely Dynamic Partial Reconfiguration

The Fifth NASA Symposium on VLSI Design

The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design

Threat Analysis, Countermeaures and Design Strategies for Secure Computation in Nanometer CMOS Regime

Advancements in CMOS technologies have led to an era of Internet Of Things (IOT), where the devices have the ability to communicate with each other apart from their computational power. As more and more sensitive data is processed by embedded devices, the trend towards lightweight and efficient cryptographic primitives has gained significant momentum. Achieving a perfect security in silicon is extremely difficult, as the traditional cryptographic implementations are vulnerable to various active and passive attacks. There is also a threat in the form of hardware Trojans inserted into the supply chain by the untrusted third-party manufacturers for economic incentives. Apart from the threats in various forms, some of the embedded security applications such as random number generators (RNGs) suffer from the impacts of process variations and noise in nanometer CMOS. Despite their disadvantages, the random and unique nature of process variations can be exploited for generating unique identifiers and can be of tremendous use in embedded security. In this dissertation, we explore techniques for precise fault-injection in cryptographic hardware based on voltage/temperature manipulation and hardware Trojan insertion. We demonstrate the effectiveness of these techniques by mounting fault attacks on state-of-the-art ciphers. Physically Unclonable Functions (PUFs) are novel cryptographic primitives for extracting secret keys from complex manufacturing variations in integrated circuits (ICs). We explore the vulnerabilities of some of the popular strong PUF architectures to modeling attacks using Machine Learning (ML) algorithms. The attacks use silicon data from a test chip manufactured in IBM 32nm silicon-on-insulator (SOI) technology. Attack results demonstrate that the majority of strong PUF architectures can be predicted to very high accuracies using limited training data. We also explore the techniques to exploit unreliable data from strong PUF architectures and effectively use them to improve the prediction accuracies of modeling attacks. Motivated by the vulnerabilities of existing PUF architectures, we present a novel modeling attack resistant PUF architecture based on non-linear computing elements. Post-silicon validation results are used to demonstrate the effectiveness of the non-linear PUF architecture against modeling and fault-injection attacks. Apart from the techniques to improve the security of PUF circuits, we also present novel solutions to improve the performance of PUF circuits from the perspectives of IC fabrication and system/protocol design. Finally, we present a statistical benchmark suite to evaluate PUFs in conceptualization phase and also to enable fine-grained security assessments for varying PUF parameters. Data compressibility analyses for validating the statistical benchmark suite are also presented

Intelligent Circuits and Systems

ICICS-2020 is the third conference initiated by the School of Electronics and Electrical Engineering at Lovely Professional University that explored recent innovations of researchers working for the development of smart and green technologies in the fields of Energy, Electronics, Communications, Computers, and Control. ICICS provides innovators to identify new opportunities for the social and economic benefits of society.　 This conference bridges the gap between academics and R&D institutions, social visionaries, and experts from all strata of society to present their ongoing research activities and foster research relations between them. It provides opportunities for the exchange of new ideas, applications, and experiences in the field of smart technologies and finding global partners for future collaboration. The ICICS-2020 was conducted in two broad categories, Intelligent Circuits & Intelligent Systems and Emerging Technologies in Electrical Engineering