thermogram Breast Cancer Detection : a comparative study of two machine learning techniques

Breast cancer is considered one of the major threats for women’s health all over the world. The World Health Organization (WHO) has reported that 1 in every 12 women could be subject to a breast abnormality during her lifetime. To increase survival rates, it is found that it is very effective to early detect breast cancer. Mammography-based breast cancer screening is the leading technology to achieve this aim. However, it still can not deal with patients with dense breast nor with tumor size less than 2 mm. Thermography-based breast cancer approach can address these problems. In this paper, a thermogram-based breast cancer detection approach is proposed. This approach consists of four phases: (1) Image Pre-processing using homomorphic filtering, top-hat transform and adaptive histogram equalization, (2) ROI Segmentation using binary masking and K-mean clustering, (3) feature extraction using signature boundary, and (4) classification in which two classifiers, Extreme Learning Machine (ELM) and Multilayer Perceptron (MLP), were used and compared. The proposed approach is evaluated using the public dataset, DMR-IR. Various experiment scenarios (e.g., integration between geometrical feature extraction, and textural features extraction) were designed and evaluated using different measurements (i.e., accuracy, sensitivity, and specificity). The results showed that ELM-based results were better than MLP-based ones with more than 19%

Breast Cancer Diagnosis in Women Using Neural Networks and Deep Learning

Breast cancer is a deadly disease affecting women around the world. It can spread rapidly into other parts of the body, causing untimely death when undetected due to rapid growth and division of cells in the breast. Early diagnosis of this disease tends to increase the survival rate of women suffering from the disease. The use of technology to detect breast cancer in women has been explored over the years. A major drawback of most research in this area is low accuracy in the detection rate of breast cancer in women. This is partly due to the availability of few data sets to train classifiers and the lack of efficient algorithms that achieve optimal results. This research aimed to develop a model that uses a machine learning approach (convolution neural network) to detect breast cancer in women with significantly high accuracy. In this paper, a model was developed using 569 mammograms of various breasts diagnosed with benign and maligned cancers. The model achieved an accuracy of 98.25% and sensitivity of 99.5% after 80 iterations.

Breast Cancer Diagnosis in Women Using Neural Networks and Deep Learning

Breast cancer is a deadly disease affecting women around the world. It can spread rapidly into other parts of the body, causing untimely death when undetected due to rapid growth and division of cells in the breast. Early diagnosis of this disease tends to increase the survival rate of women suffering from the disease. The use of technology to detect breast cancer in women has been explored over the years. A major drawback of most research in this area is low accuracy in the detection rate of breast cancer in women. This is partly due to the availability of few data sets to train classifiers and the lack of efficient algorithms that achieve optimal results. This research aimed to develop a model that uses a machine learning approach (convolution neural network) to detect breast cancer in women with significantly high accuracy. In this paper, a model was developed using 569 mammograms of various breasts diagnosed with benign and maligned cancers. The model achieved an accuracy of 98.25% and sensitivity of 99.5% after 80 iterations.

Applications of advanced spectroscopic imaging to biological tissues

The objectives of this research were to develop experimental approaches that can be applied to classify different stages of malignancy in routine formalin-fixed and paraffin-embedded tissues and to optimise the imaging approaches using novel implementations. It is hoped that the approach developed in this research may be applied for early cancer diagnostics in clinical settings in the future in order to increase cancer survival rates. Infrared spectroscopic imaging has recently shown to have great potential as a powerful method for the spatial visualization of biological tissues. This spectroscopic technique does not require sample labelling because its chemical specificity allows the differentiation of biocomponents to be achieved based on their chemical structures. Experiments were performed on 3-µm thick prostate and colon tissues that were deposited on 2 mm-calcium fluoride (CaF2) which were subsequently deparaffinised. The samples were measured under IR microscopes, in both transmission and attenuated total reflection (ATR) mode. In transmission, thermo-spectroscopic imaging of the prostate samples was first carried out to investigate the potential of thermography to complement the information obtained from IR spectral. Spectroscopic imaging has made the acquisition of chemical map of a sample possible within a short time span since this approach facilitates the simultaneous acquisition of thousands of spatially resolved infrared spectra. Spectral differences in the lipid region (3000 -2800 cm-1) were identified between cancer and benign regions within prostate tissues. The governing spectral band for classification was anti-symmetric stretching of CH2 (2921 cm-1) from PCA analysis. Nonetheless, the difference in tissue emissivity at room temperature was minimal, thus the contrast in the thermal image is low for intra-tissue classification. Besides, the thermal camera could only capture IR light between 3333-2000 cm-1. To record spectral data between 3900 - 900 cm-1 (mid-IR), Fourier transform infrared (FTIR) spectroscopic imaging was used to classify the different stages of colon disease. An automated processing framework was developed, that could achieve an overall classification accuracy of 92.7%. The processing steps included unsupervised k-means clustering of lipid bands, followed by Random Forest (RF) classification using the ‘fingerprint’ region of the data. The implementation of a correcting lens and the effect of the RMieS-EMSC correction on the tissue spectra were also investigated, which showed that computational RMieS-EMSC correction was more effective at removing spectral artefacts than the correcting lens. Furthermore, the effect of the fluctuations of surrounding humidity where the experiments were carried out was studied by using various supersaturated salt solutions. Significant peak changes of the phosphate band were observed, most notably the peak shift of the anti-symmetric stretching of phosphate bands from 1230 cm-1 to 1238 cm-1 was observed. By regulating and controlling humidity at its lowest, the classification accuracy of the colon specimens was improved without having to resort to alteration on the RF machine learning algorithm. In the ATR mode, additional apertures were introduced to the FTIR microscope, as a novel means of depth profiling the prostate tissue samples by changing the angle of incidence of IR light beam. Despite the successful attempts in capturing the qualitative information on the change of tissue morphology with the depth of penetration (dp), the spectral data were not suitable for further processing with machine learning as dp changes with wavelengths. Apart from the apertures, a ‘large-area’ germanium (Ge) crystal was introduced to enable simultaneous mapping and imaging of the colon tissue samples. Many advantages of this new implementation were observed, which included improvement in signal-to-noise ratio, uniform distribution, and no impression left on the sample. The research done in this thesis set a groundwork for clinical diagnosis and the novel implementations were transferable to studies of other samples.Open Acces

Infrared Thermography for the Assessment of Lumbar Sympathetic Blocks in Patients with Complex Regional Pain Syndrome

[ES] El síndrome de dolor regional complejo (SDRC) es un trastorno de dolor crónico debilitante que suele afectar a una extremidad, y se caracteriza por su compleja e incomprendida fisiopatología subyacente, lo que supone un reto para su diagnóstico y tratamiento. Para evitar el deterioro de la calidad de vida de los pacientes, la consecución de un diagnóstico y tratamiento tempranos marca un punto de inflexión. Entre los diferentes tratamientos, los bloqueos simpáticos lumbares (BSLs) tienen como objetivo aliviar el dolor y reducir algunos signos simpáticos de la afección. Este procedimiento intervencionista se lleva a cabo inyectando anestesia local alrededor de los ganglios simpáticos y, hasta ahora, se realiza frecuentemente bajo el control de diferentes técnicas de imagen, como los ultrasonidos o la fluoroscopia. Dado que la termografía infrarroja (TIR) ha demostrado ser una herramienta eficaz para evaluar la temperatura de la piel, y teniendo en cuenta el efecto vasodilatador que presentan los anestésicos locales inyectados, se ha considerado el uso de la IRT para la evaluación de los BSLs. El objetivo de esta tesis es, estudiar la capacidad de la TIR como una técnica complementaria para la evaluación de la eficacia en la ejecución de los BSLs. Para cumplir este objetivo, se han realizado tres estudios implementando la TIR en pacientes diagnosticados de SDRC de miembros inferiores sometidos a BSLs. El primer estudio se centra en la viabilidad de la TIR como herramienta complementaria para la evaluación de la eficacia ejecución de los BSLs. Cuando se realizan los BSLs, la colocación correcta de la aguja es crítica para llevar realizar el procedimiento técnicamente correcto y, en consecuencia, para lograr los resultados clínicos deseados. Para verificar la posición de la aguja, tradicionalmente se han utilizado técnicas de imagen, sin embargo, los BSLs bajo control fluoroscópico no siempre aseguran su exacta ejecución. Por este motivo, se han aprovechado las alteraciones térmicas inducidas por los anestésicos locales y se han evaluado mediante la TIR. Así, cuando en las imágenes infrarrojas se observaron cambios térmicos en la planta del pie afectado tras la inyección de lidocaína, se consideró que el BSL era exitoso. El segundo estudio trata del análisis cuantitativo de los datos térmicos recogidos en el entorno clínico a partir de diferentes parámetros basados en las temperaturas extraídas de ambos pies. Según los resultados, para predecir adecuadamente los BSLs exitosos, se deberían analizar las temperaturas de las plantas de los pies durante los primeros cuatro minutos tras la inyección del anestésico local. Así, la aplicación de la TIR en el entorno clínico podría ser de gran ayuda para evaluar la eficacia de ejecución de los BSLs mediante la evaluación de las temperaturas de los pies en tiempo real. Por último, el tercer estudio aborda el análisis cuantitativo mediante la implementación de herramientas de machine learning (ML) para evaluar su capacidad de clasificar automáticamente los BSLs. En este estudio se han utilizado una serie de características térmicas extraídas de las imágenes infrarrojas para evaluar cuatro algoritmos de ML para tres momentos diferentes después del instante de referencia (inyección de lidocaína). Los resultados indican que los cuatro modelos evaluados presentan buenos rendimientos para clasificar automáticamente los BSLs entre exitosos y fallidos. Por lo tanto, la combinación de parámetros térmicos junto con de clasificación ML muestra ser eficaz para la clasificación automática de los procedimientos de BSLs. En conclusión, el uso de la TIR como técnica complementaria en la práctica clínica diaria para la evaluación de los BSLs ha demostrado ser totalmente eficaz. Dado que es un método objetivo y relativamente sencillo de implementar, puede permitir que los médicos especialistas en dolor identifiquen los bloqueos realizados fallidos y, en consecuencia, puedan revertir esta situación.[CA] La síndrome de dolor regional complex (SDRC) és un trastorn de dolor crònic debilitant que sol afectar una extremitat, i es caracteritza per la seua complexa i incompresa fisiopatologia subjacent, la qual cosa suposa un repte per al seu diagnòstic i tractament. Per a evitar la deterioració de la qualitat de vida dels pacients, la consecució d'un diagnòstic i tractament primerencs marca un punt d'inflexió. Entre els diferents tractaments , els bloquejos simpàtics lumbars (BSLs) tenen com a objectiu alleujar el dolor i reduir alguns signes simpàtics de l'afecció. Aquest procediment intervencionista es duu a terme injectant anestèsia local al voltant dels ganglis simpàtics i, fins ara, es realitza freqüentment sota el control de diferents tècniques d'imatge, com els ultrasons o la fluoroscopia. Atés que la termografia infraroja (TIR) ha demostrat ser una eina eficaç per a avaluar la temperatura de la pell, i tenint en compte l'efecte vasodilatador que presenten els anestèsics locals injectats, s'ha considerat l'ús de la TIR per a l'avaluació dels BSLs. L'objectiu d'aquesta tesi és, estudiar la capacitat de la TIR com una tècnica complementària per a l'avaluació de l'eficàcia en l'execució dels BSLs. Per a complir aquest objectiu, s'han realitzat tres estudis implementant la TIR en pacients diagnosticats de SDRC de membres inferiors sotmesos a BSLs. El primer estudi avalua la viabilitat de la TIR com a eina complementària per a l'analisi de l'eficàcia en l'execució dels BSLs. Quan es realitzen els BSLs, la col·locació correcta de l'agulla és crítica per a dur a terme el procediment tècnicament correcte i, en conseqüència, per a aconseguir els resultats clínics desitjats. Per a verificar la posició de l'agulla, tradicionalment s'han utilitzat tècniques d'imatge, no obstant això, els BSLs baix control fluoroscòpic no sempre asseguren la seua exacta execució. Per aquest motiu, s'han aprofitat les alteracions tèrmiques induïdes pels anestèsics locals i s'han avaluat mitjançant la TIR. Així, quan en les imatges infraroges es van observar canvis tèrmics en la planta del peu afectat després de la injecció de lidocaIna, es va considerar que el BSL era exitós. El segon estudi tracta de l'anàlisi quantitativa de les dades tèrmiques recollides en l'entorn clínic a partir de diferents paràmetres basats en les temperatures extretes d'ambdós peus. Segons els resultats, per a predir adequadament l'execució exitosa d'un BSL, s'haurien d'analitzar les temperatures de les plantes dels peus durant els primers quatre minuts després de la injecció de l'anestèsic local. Així, l'implementació de la TIR en l'entorn clínic podria ser de gran ajuda per a avaluar l'eficàcia d'execució dels BSLs mitjançant l'avaluació de les temperatures dels peus en temps real. El tercer estudi aborda l'anàlisi quantitativa mitjançant la implementació d'eines machine learning (ML) per a avaluar la seua capacitat de classificar automàticament els BSLs. En aquest estudi s'han utilitzat una sèrie de característiques tèrmiques extretes de les imatges infraroges per a avaluar quatre algorismes de ML per a tres moments diferents després de l'instant de referència (injecció de lidocaïna). Els resultats indiquen que els quatre models avaluats presenten bons rendiments per a classificar automàticament els BSLs en exitosos i fallits. Per tant, la combinació de paràmetres tèrmics juntament amb models de classificació ML mostra ser eficaç per a la classificació automàtica dels procediments de BSLs. En conclusió, l'ús de la TIR com a tècnica complementària en la pràctica clínica diària per a l'avaluació dels BSLs ha demostrat ser totalment eficaç. Atés que és un mètode objectiu i relativament senzill d'implementar, pot ajudar els metges especialistes en dolor a identificar els bloquejos realitzats fallits i, en conseqüència, puguen revertir aquesta situació.[EN] Complex regional pain syndrome (CRPS) is a debilitating chronic pain condition that usually affects one limb, and it is characterized by its misunderstood underlying pathophysiology, resulting in both challenging diagnosis and treatment. To avoid the patients' impairment quality of life, the achievement of both an early diagnosis and treatment marks a turning point. Among the different treatment approaches, lumbar sympathetic blocks (LSBs) are addressed to alleviate the pain and reduce some sympathetic signs of the condition. This interventional procedure is performed by injecting local anaesthetic around the sympathetic ganglia and, until now, it has been performed under different imaging techniques, including the ultrasound or the fluoroscopy approaches. Since infrared thermography (IRT) has proven to be a powerful tool to evaluate skin temperatures and taking into account the vasodilatory effects of the local anaesthetics injected in the LSB, the use of IRT has been considered for the LSBs assessment. Therefore, the purpose of this thesis is to evaluate the capability of IRT as a complementary assessment technique for the LSBs procedures performance. To fulfil this aim, three studies have been conducted implementing the IRT in patients diagnosed with lower limbs CRPS undergoing LSBs. The first study focuses on the feasibility of IRT as a complementary assessment tool for LSBs performance, that is, for the confirmation of the proper needle position. When LSBs are performed, the correct needle placement is critical to carry out the procedure technically correct and, consequently, to achieve the desired clinical outcomes. To verify the needle placement position, imaging techniques have traditionally been used, however, LSBs under radioscopic guidance do not always ensure an exact performance. For this reason, the thermal alterations induced by the local anaesthetics, have been exploited and assessed by means of IRT. Thus, the LSB procedure was considered successfully performed when thermal changes within the affected plantar foot were observed in the infrared images after the lidocaine injection. The second study deals with the quantitative analysis of the thermal data collected in the clinical setting through the evaluation of different temperature-based parameters extracted from both feet. According to the results, the proper LSB success prediction could be achieved in the first four minutes after the block through the evaluation of the feet skin temperatures. Therefore, the implementation of IRT in the clinical setting might be of great help in assessing the LSBs performance by evaluating the plantar feet temperatures in real time. Finally, the third study addresses the quantitative analysis by implementing machine learning (ML) tools to assess their capability to automatically classify LSBs. In this study, a set of thermal features retrieved from the infrared images have been used to evaluate four ML algorithms for three different moments after the baseline time (lidocaine injection). The results indicate that all four models evaluated present good performance metrics to automatically classify LSBs into successful and failed. Therefore, combining infrared features with ML classification models shows to be effective for the LSBs procedures automatic classification. In conclusion, the use of IRT as a complementary technique in daily clinical practice for LSBs assessment has been evidenced entirely effective. Since IRT is an objective method and it is not very demanding to perform, it is of great help for pain physicians to identify failed procedures, and consequently, it allow them to reverse this situation.Cañada Soriano, M. (2022). Infrared Thermography for the Assessment of Lumbar Sympathetic Blocks in Patients with Complex Regional Pain Syndrome [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/181699TESI

A Patient-Specific Infrared Imaging Technique for Adjunctive Breast Cancer Screening: A Clinical and Simulation - Based Approach

Breast cancer is currently the most prevalent form of cancer in women with over 266,000 new diagnoses every year. The various methods used for breast cancer screening range in accuracy and cost, however there is no easily reproducible, reliable, low-cost screening method currently available for detecting cancer in breasts, especially with dense tissue. Steady-state Infrared Imaging (IRI) is unaffected by tissue density and has the potential to detect tumors in the breast by measuring and capturing the thermal profile on the breast surface induced by increased blood perfusion and metabolic activity in a rapidly growing malignant tumor. The current work presents a better understanding of IRI as an accurate breast cancer detection modality. A detailed study utilizing IRI-MRI approach with clinical design and validation of an elaborate IRI-Mammo study are presented by considering patient population, clinical study design, image interpretation, and recommended future path. Clinical IRI images are obtained in this study and an ANSYS-based modeling process developed earlier at RIT is used to localize and detect tumor in seven patients without subjective human interpretation. Further, the unique thermal characteristics of tumors that make their signatures distinct from benign conditions are identified. This work is part of an ongoing multidisciplinary collaboration between a team of thermal engineers and numerical modelers at the Rochester Institute of Technology and a team of clinicians at the Rochester General Hospital. The following components were developed to ensure valid experimentation while considering ethical considerations: IRB documentation, patient protocols, an image acquisition system (camera setup and screening table), and the necessary tools needed for image analysis without human interpretation. IRI images in the prone position were obtained and were used in accurately detecting the presence of a cancerous tumor in seven subjects. The size and location of tumor was also confirmed within 7 mm as compared to biopsy-proven pathology information. The study indicates that the IRI-Mammo approach has potential to be a highly effective adjunctive screening tool that can improve the breast cancer detection rates especially for subjects with dense breast tissue. This method is low cost, no-touch, radiation-free and highly portable, making it an attractive candidate as a breast cancer detection modality. Further, the developed method provided insight into infrared features corresponding to other biological images, pathology reports and patient history

A Novel CNN pooling layer for breast cancer segmentation and classification from thermograms

Breast cancer is the second most frequent cancer worldwide, following lung cancer and the fifth leading cause of cancer death and a major cause of cancer death among women. In recent years, convolutional neural networks (CNNs) have been successfully applied for the diagnosis of breast cancer using different imaging modalities. Pooling is a main data processing step in CNN that decreases the feature maps’ dimensionality without losing major patterns. However, the effect of pooling layer was not studied efficiently in literature. In this paper, we propose a novel design for the pooling layer called vector pooling block (VPB) for the CCN algorithm. The proposed VPB consists of two data pathways, which focus on extracting features along horizontal and vertical orientations. The VPB makes the CNNs able to collect both global and local features by including long and narrow pooling kernels, which is different from the traditional pooling layer, that gathers features from a fixed square kernel. Based on the novel VPB, we proposed a new pooling module called AVG-MAX VPB. It can collect informative features by using two types of pooling techniques, maximum and average pooling. The VPB and the AVG-MAX VPB are plugged into the backbone CNNs networks, such as U-Net, AlexNet, ResNet18 and GoogleNet, to show the advantages in segmentation and classification tasks associated with breast cancer diagnosis from thermograms. The proposed pooling layer was evaluated using a benchmark thermogram database (DMR-IR) and its results compared with U-Net results which was used as base results. The U-Net results were as follows: global accuracy = 96.6%, mean accuracy = 96.5%, mean IoU = 92.07%, and mean BF score = 78.34%. The VBP-based results were as follows: global accuracy = 98.3%, mean accuracy = 97.9%, mean IoU = 95.87%, and mean BF score = 88.68% while the AVG-MAX VPB-based results were as follows: global accuracy = 99.2%, mean accuracy = 98.97%, mean IoU = 98.03%, and mean BF score = 94.29%. Other network architectures also demonstrate superior improvement considering the use of VPB and AVG-MAX VPB

Optical Diagnostics in Human Diseases

Optical technologies provide unique opportunities for the diagnosis of various pathological disorders. The range of biophotonics applications in clinical practice is considerably wide given that the optical properties of biological tissues are subject to significant changes during disease progression. Due to the small size of studied objects (from μm to mm) and despite some minimum restrictions (low-intensity light is used), these technologies have great diagnostic potential both as an additional tool and in cases of separate use, for example, to assess conditions affecting microcirculatory bed and tissue viability. This Special Issue presents topical articles by researchers engaged in the development of new methods and devices for optical non-invasive diagnostics in various fields of medicine. Several studies in this Special Issue demonstrate new information relevant to surgical procedures, especially in oncology and gynecology. Two articles are dedicated to the topical problem of breast cancer early detection, including during surgery. One of the articles is devoted to urology, namely to the problem of chronic or recurrent episodic urethral pain. Several works describe the studies in otolaryngology and dentistry. One of the studies is devoted to diagnosing liver diseases. A number of articles contribute to the studying of the alterations caused by diabetes mellitus and cardiovascular diseases. The results of all the presented articles reflect novel innovative research and emerging ideas in optical non-invasive diagnostics aimed at their wider translation into clinical practice

Biomedical Sensing and Imaging

This book mainly deals with recent advances in biomedical sensing and imaging. More recently, wearable/smart biosensors and devices, which facilitate diagnostics in a non-clinical setting, have become a hot topic. Combined with machine learning and artificial intelligence, they could revolutionize the biomedical diagnostic field. The aim of this book is to provide a research forum in biomedical sensing and imaging and extend the scientific frontier of this very important and significant biomedical endeavor