Study of L0-norm constraint normalized subband adaptive filtering algorithm

Limited by fixed step-size and sparsity penalty factor, the conventional sparsity-aware normalized subband adaptive filtering (NSAF) type algorithms suffer from trade-off requirements of high filtering accurateness and quicker convergence behavior. To deal with this problem, this paper proposes variable step-size L0-norm constraint NSAF algorithms (VSS-L0-NSAFs) for sparse system identification. We first analyze mean-square-deviation (MSD) statistics behavior of the L0-NSAF algorithm innovatively in according to a novel recursion form and arrive at corresponding expressions for the cases that background noise variance is available and unavailable, where correlation degree of system input is indicated by scaling parameter r. Based on derivations, we develop an effective variable step-size scheme through minimizing the upper bounds of the MSD under some reasonable assumptions and lemma. To realize performance improvement, an effective reset strategy is incorporated into presented algorithms to tackle with non-stationary situations. Finally, numerical simulations corroborate that the proposed algorithms achieve better performance in terms of estimation accurateness and tracking capability in comparison with existing related algorithms in sparse system identification and adaptive echo cancellation circumstances.Comment: 15 pages,15 figure

Efficient time delay estimation and compensation applied to the cancellation of acoustic echo

The system identification problem is notably dealt with using adaptive filtering approaches. In many applications the unknown system response consists of an initial sequence of zero-valued coefficients that precedes the active part of the response. The presence of these coefficients introduces a flat delay in the incoming signals which can take significantly large values. When most adaptive approaches attempt to model such a system, the presence of flat delay impairs their operation and performance. The approach introduced in this thesis aims to model the flat delay and active part of the unknown system separately. An efficient system for time delay estimation (TDE) is introduced to estimate the flat delay of an unknown system. The estimated delay is then compensated within the adaptive system thus allowing the latter to cover the active part ofthe unknown system. The proposed system is applied to the Acoustic Echo Cancellation (ABC) problem

System Identification with Applications in Speech Enhancement

As the increasing popularity of integrating hands-free telephony on mobile portable devices and the rapid development of voice over internet protocol, identification of acoustic systems has become desirable for compensating distortions introduced to speech signals during transmission, and hence enhancing the speech quality. The objective of this research is to develop system identification algorithms for speech enhancement applications including network echo cancellation and speech dereverberation. A supervised adaptive algorithm for sparse system identification is developed for network echo cancellation. Based on the framework of selective-tap updating scheme on the normalized least mean squares algorithm, the MMax and sparse partial update tap-selection strategies are exploited in the frequency domain to achieve fast convergence performance with low computational complexity. Through demonstrating how the sparseness of the network impulse response varies in the transformed domain, the multidelay filtering structure is incorporated to reduce the algorithmic delay. Blind identification of SIMO acoustic systems for speech dereverberation in the presence of common zeros is then investigated. First, the problem of common zeros is defined and extended to include the presence of near-common zeros. Two clustering algorithms are developed to quantify the number of these zeros so as to facilitate the study of their effect on blind system identification and speech dereverberation. To mitigate such effect, two algorithms are developed where the two-stage algorithm based on channel decomposition identifies common and non-common zeros sequentially; and the forced spectral diversity approach combines spectral shaping filters and channel undermodelling for deriving a modified system that leads to an improved dereverberation performance. Additionally, a solution to the scale factor ambiguity problem in subband-based blind system identification is developed, which motivates further research on subbandbased dereverberation techniques. Comprehensive simulations and discussions demonstrate the effectiveness of the aforementioned algorithms. A discussion on possible directions of prospective research on system identification techniques concludes this thesis

Doctor of Philosophy

dissertationHearing aids suffer from the problem of acoustic feedback that limits the gain provided by hearing aids. Moreover, the output sound quality of hearing aids may be compromised in the presence of background acoustic noise. Digital hearing aids use advanced signal processing to reduce acoustic feedback and background noise to improve the output sound quality. However, it is known that the output sound quality of digital hearing aids deteriorates as the hearing aid gain is increased. Furthermore, popular subband or transform domain digital signal processing in modern hearing aids introduces analysis-synthesis delays in the forward path. Long forward-path delays are not desirable because the processed sound combines with the unprocessed sound that arrives at the cochlea through the vent and changes the sound quality. In this dissertation, we employ a variable, frequency-dependent gain function that is lower at frequencies of the incoming signal where the information is perceptually insignificant. In addition, the method of this dissertation automatically identifies and suppresses residual acoustical feedback components at frequencies that have the potential to drive the system to instability. The suppressed frequency components are monitored and the suppression is removed when such frequencies no longer pose a threat to drive the hearing aid system into instability. Together, the method of this dissertation provides more stable gain over traditional methods by reducing acoustical coupling between the microphone and the loudspeaker of a hearing aid. In addition, the method of this dissertation performs necessary hearing aid signal processing with low-delay characteristics. The central idea for the low-delay hearing aid signal processing is a spectral gain shaping method (SGSM) that employs parallel parametric equalization (EQ) filters. Parameters of the parametric EQ filters and associated gain values are selected using a least-squares approach to obtain the desired spectral response. Finally, the method of this dissertation switches to a least-squares adaptation scheme with linear complexity at the onset of howling. The method adapts to the altered feedback path quickly and allows the patient to not lose perceivable information. The complexity of the least-squares estimate is reduced by reformulating the least-squares estimate into a Toeplitz system and solving it with a direct Toeplitz solver. The increase in stable gain over traditional methods and the output sound quality were evaluated with psychoacoustic experiments on normal-hearing listeners with speech and music signals. The results indicate that the method of this dissertation provides 8 to 12 dB more hearing aid gain than feedback cancelers with traditional fixed gain functions. Furthermore, experimental results obtained with real world hearing aid gain profiles indicate that the method of this dissertation provides less distortion in the output sound quality than classical feedback cancelers, enabling the use of more comfortable style hearing aids for patients with moderate to profound hearing loss. Extensive MATLAB simulations and subjective evaluations of the results indicate that the method of this dissertation exhibits much smaller forward-path delays with superior howling suppression capability

Residual feedback suppression with extended model-based postfilters

When designing closed-loop electro-acoustic systems, which can commonly be found in hearing aids or public address systems, the most challenging task is canceling and/or suppressing the feedback caused by the acoustic coupling of the transducers of such systems. In many applications, feedback cancelation based on adaptive filters is used for this purpose. However, due to computational complexity such a feedback canceler is often limited in the length of the filter’s impulse response. Consequently, a residual feedback, which is still audible and may lead to system instability, remains in most cases. In this work, we present enhancements for model-based postfilters based on a priori knowledge of the feedback path which can be used cooperatively with the adaptive filter-based feedback cancelation system to suppress residual feedback and improve the overall feedback reduction capability. For this, we adapted an existing reverberation model such that our model additionally considers the presence and the performance of the adaptive filter. We tested the effectiveness of our approach by means of both objective and subjective evaluations

Acoustic Feedback Noise Cancellation in Hearing Aids Using Adaptive Filter

To enhance speech intelligibility for people with hearing loss, hearing aids will amplify speech using gains derived from evidence-based prescriptive methods, in addition to other advanced signal processing mechanisms. While the evidence supports the use of hearing aid signal processing for speech intelligibility, these signal processing adjustments can also be detrimental to hearing aid sound quality, with poor hearing aid sound quality cited as a barrier to device adoption. In general, an uncontrolled environment may contain degradation components like background noise, speech from other speakers etc. along with required speech components. In this paper, we implement adaptive filtering design for acoustic feedback noise cancellation in hearing aids. The adaptive filter architecture has been designed using normalized least mean square algorithm. By using adaptive filters both filter input coefficients are changeable during run-time and reduce noise in hearing aids. The proposed design is implemented in matlab and the simulations shows that the proposed architecture produces good quality of speech, accuracy, maintain stable steady state. The proposed design is validated with parameters like Noise Distortion, Perceptual Evaluation of Speech Quality, Signal to Noise Ratio, and Speech Distortion. The feedback canceller is implemented in MATLAB 9.4 simulink version release name of R2018a is used for validation with Echo Return Loss Enhancement (ERLE). The ERLE of the NMLS is reduced when the filter order is increases. Around 10% of the power spectrum density (PSD) is less when compared with existing designs

An investigation of the utility of monaural sound source separation via nonnegative matrix factorization applied to acoustic echo and reverberation mitigation for hands-free telephony

In this thesis we investigate the applicability and utility of Monaural Sound Source Separation (MSSS) via Nonnegative Matrix Factorization (NMF) for various problems related to audio for hands-free telephony. We first investigate MSSS via NMF as an alternative acoustic echo reduction approach to existing approaches such as Acoustic Echo Cancellation (AEC). To this end, we present the single-channel acoustic echo problem as an MSSS problem, in which the objective is to extract the users signal from a mixture also containing acoustic echo and noise. To perform separation, NMF is used to decompose the near-end microphone signal onto the union of two nonnegative bases in the magnitude Short Time Fourier Transform domain. One of these bases is for the spectral energy of the acoustic echo signal, and is formed from the in- coming far-end user’s speech, while the other basis is for the spectral energy of the near-end speaker, and is trained with speech data a priori. In comparison to AEC, the speaker extraction approach obviates Double-Talk Detection (DTD), and is demonstrated to attain its maximal echo mitigation performance immediately upon initiation and to maintain that performance during and after room changes for similar computational requirements. Speaker extraction is also shown to introduce distortion of the near-end speech signal during double-talk, which is quantified by means of a speech distortion measure and compared to that of AEC. Subsequently, we address Double-Talk Detection (DTD) for block-based AEC algorithms. We propose a novel block-based DTD algorithm that uses the available signals and the estimate of the echo signal that is produced by NMF-based speaker extraction to compute a suitably normalized correlation-based decision variable, which is compared to a fixed threshold to decide on doubletalk. Using a standard evaluation technique, the proposed algorithm is shown to have comparable detection performance to an existing conventional block-based DTD algorithm. It is also demonstrated to inherit the room change insensitivity of speaker extraction, with the proposed DTD algorithm generating minimal false doubletalk indications upon initiation and in response to room changes in comparison to the existing conventional DTD. We also show that this property allows its paired AEC to converge at a rate close to the optimum. Another focus of this thesis is the problem of inverting a single measurement of a non- minimum phase Room Impulse Response (RIR). We describe the process by which percep- tually detrimental all-pass phase distortion arises in reverberant speech filtered by the inverse of the minimum phase component of the RIR; in short, such distortion arises from inverting the magnitude response of the high-Q maximum phase zeros of the RIR. We then propose two novel partial inversion schemes that precisely mitigate this distortion. One of these schemes employs NMF-based MSSS to separate the all-pass phase distortion from the target speech in the magnitude STFT domain, while the other approach modifies the inverse minimum phase filter such that the magnitude response of the maximum phase zeros of the RIR is not fully compensated. Subjective listening tests reveal that the proposed schemes generally produce better quality output speech than a comparable inversion technique

Acoustic Feedback Noise Cancellation in Hearing Aids Using Adaptive Filter

To enhance speech intelligibility for people with hearing loss, hearing aids will amplify speech using gains derived from evidence-based prescriptive methods, in addition to other advanced signal processing mechanisms. While the evidence supports the use of hearing aid signal processing for speech intelligibility, these signal processing adjustments can also be detrimental to hearing aid sound quality, with poor hearing aid sound quality cited as a barrier to device adoption. In general, an uncontrolled environment may contain degradation components like background noise, speech from other speakers etc. along with required speech components. In this paper, we implement adaptive filtering design for acoustic feedback noise cancellation in hearing aids. The adaptive filter architecture has been designed using normalized least mean square algorithm. By using adaptive filters both filter input coefficients are changeable during run-time and reduce noise in hearing aids. The proposed design is implemented in matlab and the simulations shows that the proposed architecture produces good quality of speech, accuracy, maintain stable steady state. The proposed design is validated with parameters like Noise Distortion, Perceptual Evaluation of Speech Quality, Signal to Noise Ratio, and Speech Distortion. The feedback canceller is implemented in MATLAB 9.4 simulink version release name of R2018a is used for validation with Echo Return Loss Enhancement (ERLE). The ERLE of the NMLS is reduced when the filter order is increases. Around 10% of the power spectrum density (PSD) is less when compared with existing designs