Output Feedback Fractional-Order Nonsingular Terminal Sliding Mode Control of Underwater Remotely Operated Vehicles

For the 4-DOF (degrees of freedom) trajectory tracking control problem of underwater remotely operated vehicles (ROVs) in the presence of model uncertainties and external disturbances, a novel output feedback fractional-order nonsingular terminal sliding mode control (FO-NTSMC) technique is introduced in light of the equivalent output injection sliding mode observer (SMO) and TSMC principle and fractional calculus technology. The equivalent output injection SMO is applied to reconstruct the full states in finite time. Meanwhile, the FO-NTSMC algorithm, based on a new proposed fractional-order switching manifold, is designed to stabilize the tracking error to equilibrium points in finite time. The corresponding stability analysis of the closed-loop system is presented using the fractional-order version of the Lyapunov stability theory. Comparative numerical simulation results are presented and analyzed to demonstrate the effectiveness of the proposed method. Finally, it is noteworthy that the proposed output feedback FO-NTSMC technique can be used to control a broad range of nonlinear second-order dynamical systems in finite time

The predictive functional control and the management of constraints in GUANAY II autonomous underwater vehicle actuators

Autonomous underwater vehicle control has been a topic of research in the last decades. The challenges addressed vary depending on each research group's interests. In this paper, we focus on the predictive functional control (PFC), which is a control strategy that is easy to understand, install, tune, and optimize. PFC is being developed and applied in industrial applications, such as distillation, reactors, and furnaces. This paper presents the rst application of the PFC in autonomous underwater vehicles, as well as the simulation results of PFC, fuzzy, and gain scheduling controllers. Through simulations and navigation tests at sea, which successfully validate the performance of PFC strategy in motion control of autonomous underwater vehicles, PFC performance is compared with other control techniques such as fuzzy and gain scheduling control. The experimental tests presented here offer effective results concerning control objectives in high and intermediate levels of control. In high-level point, stabilization and path following scenarios are proven. In the intermediate levels, the results show that position and speed behaviors are improved using the PFC controller, which offers the smoothest behavior. The simulation depicting predictive functional control was the most effective regarding constraints management and control rate change in the Guanay II underwater vehicle actuator. The industry has not embraced the development of control theories for industrial systems because of the high investment in experts required to implement each technique successfully. However, this paper on the functional predictive control strategy evidences its easy implementation in several applications, making it a viable option for the industry given the short time needed to learn, implement, and operate, decreasing impact on the business and increasing immediacy.Peer ReviewedPostprint (author's final draft

Velocity control of ROV using modified integral SMC with optimization tuning based on Lyapunov analysis

Remotely Operated Vehicle also known as ROV is a vehicle with high nonlinearity and uncertainty parameters that requires a robust control system to maintain stability. The nonlinearity and uncertainty of ROV are caused by underwater environmental conditions and by the movement of the vehicle. SMC is one of the control systems that can overcome nonlinearity and uncertainty with the given robust system. This work aims to control velocity of the vehicle with proposes the use of modified integral SMC compensate error in ROV and the use of particle swarm optimization (PSO) to optimize the adjustment of SMC parameters. The ROV used in this paper has a configuration of six thrusters with five DoF movements that can be controlled. Modified integral sliding mode is used to control all force direction to increase the convergence of speed error. Adjustment optimization techniques with PSO are used to determine four values of sliding control parameters for five DoF. Using Lyapunov stability approach control law of sliding mode is derived and its global stability proved mathematically. Simulation results are conducted to evaluate the effectiveness of Modified Integral SMC and compared with nonlinear control

Extended grey wolf optimization–based adaptive fast nonsingular terminal sliding mode control of a robotic manipulator

This article proposes a novel hybrid metaheuristic technique based on nonsingular terminal sliding mode controller, time delay estimation method, an extended grey wolf optimization algorithm and adaptive super twisting control law. The fast convergence is assured by nonsingular terminal sliding mode controller owing to its inherent nonlinear property and no prior knowledge of the robot dynamics is required due to time delay estimation. The proposed extended grey wolf optimization algorithm determines an optimal approximation of the inertial matrix of the robot. Moreover, adaptive super twisting control based on the Lyapunov approach overcomes the disturbances and compensate the higher dynamics not achievable by the time delay estimation method. First, the fast nonsingular terminal sliding mode controller relying on time delay estimation is designed and is combined with super twisting control for chattering attenuation. The constant gain matrix of the time delay is determined by the proposed extended grey wolf optimization algorithm. Second, an adaptive law based on Lyapunov stability theorem is designed for improving tracking performance in the presence of uncertainties and disturbances. The novelty of the proposed method lies in the adaptive law where the prior knowledge of parametric uncertainties and disturbances is not needed. Moreover, the constant gain matrix of time delay estimation method is obtained using the proposed algorithm. The control method has been tested in simulation on a 3-degrees of freedom robotic manipulator in trajectory tracking mode in the presence of control disturbances and uncertainties. The results obtained confirmed the effectiveness, robustness and the superior precision of the proposed control method compared to the classical ones

Enhancement of the Tracking Performance for Robot Manipulator by Using the Feed-forward Scheme and Reasonable Switching Mechanism

Robot manipulator has become an exciting topic for many researchers during several decades. They have investigated the advanced algorithms such as sliding mode control, neural network, or genetic scheme to implement these developments. However, they lacked the integration of these algorithms to explore many potential expansions. Simultaneously, the complicated system requires a lot of computational costs, which is not always supported. Therefore, this paper presents a novel design of switching mechanisms to control the robot manipulator. This investigation is expected to achieve superior performance by flexibly adjusting various strategies for better selection. The Proportional-Integral-Derivative (PID) scheme is well-known, easy to implement, and ensures rapid computation while it might not have much control effect. The advanced interval type-2 fuzzy sliding mode control properly deals with nonlinear factors and disturbances. Consequently, the PID scheme is switched when the tracking error is less than the threshold or is far from the target. Otherwise, the interval type-2 fuzzy sliding mode control scheme is activated to cope with unknown factors. The main contributions of this paper are (i) the recommendation of a suitable switching mechanism to drive the robot manipulator, (ii) the successful integration of the interval type-2 fuzzy sliding mode control to track the desired trajectory, and (iii) the launching of several tests to validate the proposed controller with robot model. From these achievements, it would be stated that the proposed approach is effective in tracking performance, robust in disturbance-rejection, and feasible in practical implementation

Iterative Self-Tuning Minimum Variance Control of a Nonlinear Autonomous Underwater Vehicle Maneuvering Model

This paper addresses the problem of control design for a nonlinear maneuvering model of an autonomous underwater vehicle. The control algorithm is based on an iteration technique that approximates the original nonlinear model by a sequence of linear time-varying equations equivalent to the original nonlinear problem and a self-tuning control method so that the controller is designed at each time point on the interval for trajectory tracking and heading angle control. This work makes use of self-tuning minimum variance principles. The benefit of this approach is that the nonlinearities and couplings of the system are preserved, unlike in the cases of control design based on linearized systems, reducing in this manner the uncertainty in the model and increasing the robustness of the controller. The simulations here presented use a torpedo-shaped underwater vehicle model and show the good performance of the controller and accurate tracking for certain maneuvering cases

A Computationally Efficient Path Following Control Strategy of Autonomous Electric Vehicles with Yaw Motion Stabilization

his paper proposes a computationally efficient path following control strategy of autonomous electric vehicles (AEVs) with yaw motion stabilization. First, the nonlinear control-oriented model including path following model, single track vehicle model, and Magic Formula tire model, are constructed. To handle the stability constraints with ease, the nonlinear model predictive control (NMPC) technique is applied for path following issue. Here NMPC control problem is reasonably established with the constraints of vehicle sideslip angle, yaw rate, steering angle, lateral position error, and Lyapunov stability. To mitigate the online calculation burden, the continuation/ generalized minimal residual (C/GMRES) algorithm is adopted. The deadzone penalty functions are employed for handling the inequality constraints and holding the smoothness of solution. Moreover, the varying predictive duration is utilized in this paper so as to fast gain the good initial solution by numerical algorithm. Finally, the simulation validations are carried out, which yields that the proposed strategy can achieve desirable path following and vehicle stability efficacy, while greatly reducing the computational burden compared with the NMPC controllers by active set algorithm or interior point algorithm

Robust adaptive terminal sliding mode control for dynamic positioning of a semi-submersible offshore platform

In this paper, a robust adaptive terminal sliding mode controller is proposed for dynamic positioning of a semi-submersible offshore platform. First, a state feedback controller is designed to stabilize the nominal system. Then a robust adaptive terminal sliding mode compensator is developed to eliminate the effects of uncertain dynamics and disturbances. It is shown, using Lyapunov methods, that the tracking error is driven to zero in finite time using the proposed control. The efficacy of the control algorithm is validated using simulation studies; it is shown that recent developments in the domain of robust exact differentiation are very helpful for controller implementation

Adaptive backstepping nonsingular terminal sliding-mode attitude control of flexible airships with actuator faults

This paper studies the attitude tracking control of a flexible airship subjected to wind disturbances, actuator saturation and control surface faults. Efficient flexible airship models, including elastic deformation, rigid body motions, and their coupling, are established via Lagrange theory. A fast-nonsingular terminal sliding-mode (NTSM) combined with a backstepping control is proposed for the problem. The benefits of this approach are NTSM merits of high robustness, fast transient response, and finite time convergence, as well as the backstepping control in terms of globally asymptotic stability. However, the major limitation of the backstepping NTSM is that its design procedure is dependent on the prior knowledge of the bound values of the disturbance and faults. To overcome this limitation, a wind observer is designed to compensate for the effect of the wind disturbances, an anti-windup compensator is designed to compensate for actuator saturation, and an adaptive fault estimator is designed to estimate the faults of the control surfaces. Globally exponential stability of the closed-loop control system is guaranteed by using the Lyapunov stability theory. Finally, simulation results demonstrate effectiveness and advantages of the proposed control for the Skyship-500 flexible airship, even in the presence of unknown wind disturbances, control surface faults, and different stiffness variants