Adaptive Blind MPSK Constellation Recovery and Equalization for Cognitive Radio Applications

Cognitive radio is considered a relevant communication paradigm to deal with the increasing demands in modern communications systems. Adaptive schemes are required to recognize channel conditions and to properly adjust main transmission parameters to improve the quality of communications. In this direction, blind algorithms to recover constellation, from phase-modulated signals, represent a means to implement cognitive capabilities to allow automatic modulation recognition (AMR) on receivers. Commonly, the most popular approaches for blind constellation recovery are based on a two-step scheme. The first step uses to equalize channel effects and reduce inter-symbol interference (ISI). The second step carries out constellation recovery utilizing phase locked loop (PLL) systems like the Costas Loop, then to classify the incoming signal. This work proposes a novel single-step blind adaptive filter solution, inspired by an adaptive interference canceler, for joint equalization and constellation symbol recovery from received phase shift keying (PSK) waveforms. Furthermore, we propose new coefficients update mechanisms based on the constant amplitude of PSK signals. The proposed solution exhibits reduced computational complexity compared to the state of the art and a reduced time of convergence. Additionally, the proposed scheme does not require a training sequence to operate properly. The obtained results clearly show that the proposed scheme significantly improves accuracy regarding phase symbol estimation and ISI reduction.This work has been partially funded by the Spanish National project IRENE-EARTH (PID2020-115323RB-C33 / AEI / 10.13039/501100011033) as well as by the Federal Ministry of Education and Research (BMBF, Germany) within the 6G Research and Innovation Cluster 6G-RIC under Grant 16KISK020K.Publicad

Blind equalization

An equalizer is an adaptive filter that compensates for the non-ideal characteristics of a communication channel by processing the received signal. The adaptive algorithm searches for the inverse impulse response of the channel, and it requires knowledge of a training sequence, in order to generate an error signal necessary for the adaptive process. There are practical situations where it would be highly desirable to achieve complete adaptation without the use of a training sequence, hence the the term blind . Examples of these situations are multipoint data networks, high-capacity line-of-sight digital radio, and reflection seismology. A blind adaptive algorithm has been developed, based on simplified equalization criteria. These criteria are that the second- and fourth-order moments of the input and output sequences are equalized. The algorithm is entirely driven by statistics, only requiring knowledge of the variance of the input signal. Because of the insensitivity of higher-order statistics to Gaussian processes, the algorithm performs well when additive white Gaussian noise is present in the channel. Simulations are presented in which the new blind equalizer developed is compared to other equalization algorithms

Performance of MC-CDMA with pilot code and blind equalization algorithm

Various methods and techniques have been introduced and applied to advance the state of the art of mobile wireless communications technology. For example, some techniques are applied to overcome the problem of multipath caused by the mobile environment. Multipath produces replicas of the wanted signal which arrive at the receiver with different time delays. If not dealt with properly, this environment will greatly deteriorate the quality of the wanted signal. The so-called multiuser feature of many wireless communication systems will also add some interference to the signal of interest. This thesis makes an attempt to improve the performance of wireless communication systems that use either pilot-based or blind equalization techniques to obtain channel side information. Specifically, these techniques are concerned with the estimation of multipath parameters in order to improve system performance. By inserting some pre-defined code which is called a pilot code on each pre-defined segment of a data block, we can recover the signal by pilot-based methods. Using an adaptive method, some knowledge of the channel characteristics and input source, we can achieve acceptable error rate using blind equalization as an alternate solution to pilot-based. Finally, new enhancements are added to blind equalization to improve its performance further

Hybrid solutions to instantaneous MIMO blind separation and decoding: narrowband, QAM and square cases

Future wireless communication systems are desired to support high data rates and high quality transmission when considering the growing multimedia applications. Increasing the channel throughput leads to the multiple input and multiple output and blind equalization techniques in recent years. Thereby blind MIMO equalization has attracted a great interest.Both system performance and computational complexities play important roles in real time communications. Reducing the computational load and providing accurate performances are the main challenges in present systems. In this thesis, a hybrid method which can provide an affordable complexity with good performance for Blind Equalization in large constellation MIMO systems is proposed first. Saving computational cost happens both in the signal sep- aration part and in signal detection part. First, based on Quadrature amplitude modulation signal characteristics, an efficient and simple nonlinear function for the Independent Compo- nent Analysis is introduced. Second, using the idea of the sphere decoding, we choose the soft information of channels in a sphere, and overcome the so- called curse of dimensionality of the Expectation Maximization (EM) algorithm and enhance the final results simultaneously. Mathematically, we demonstrate in the digital communication cases, the EM algorithm shows Newton -like convergence.Despite the widespread use of forward -error coding (FEC), most multiple input multiple output (MIMO) blind channel estimation techniques ignore its presence, and instead make the sim- plifying assumption that the transmitted symbols are uncoded. However, FEC induces code structure in the transmitted sequence that can be exploited to improve blind MIMO channel estimates. In final part of this work, we exploit the iterative channel estimation and decoding performance for blind MIMO equalization. Experiments show the improvements achievable by exploiting the existence of coding structures and that it can access the performance of a BCJR equalizer with perfect channel information in a reasonable SNR range. All results are confirmed experimentally for the example of blind equalization in block fading MIMO systems

A Joint Optimization Criterion for Blind DS-CDMA Detection

This paper addresses the problem of the blind detection of a desired user in an asynchronous DS-CDMA communications system with multipath propagation channels. Starting from the inverse filter criterion introduced by Tugnait and Li in 2001, we propose to tackle the problem in the context of the blind signal extraction methods for ICA. In order to improve the performance of the detector, we present a criterion based on the joint optimization of several higher-order statistics of the outputs. An algorithm that optimizes the proposed criterion is described, and its improved performance and robustness with respect to the near-far problem are corroborated through simulations. Additionally, a simulation using measurements on a real software-radio platform at 5 GHz has also been performed.Ministerio de Ciencia y tecnología TEC2004-06451-C05-0