Strain controlled biaxial stretch: An experimental characterization of natural rubber

In this paper we provide new experimental data showing the response of 40A natural rubber in uniaxial, pure shear and biaxial tension. Real-time biaxial strain control allows for independent and automatic variation of the velocity of extension and retraction of each actuator to maintain the pre-selected deformation rate within the gage area of the specimen. The remaining part of the paper focuses on the Valanis-Landel hypothesis that is used to verify and validate the consistency of the data. We use a three term Ogden model to derive stress-stretch relations to validate the experimental data. The material model parameters are determined using the primary loading path in uniaxial and equibiaxial tension. Excellent agreement is found when the model is used to predict the response in biaxial tension for different maximum in-plane stretches. The application of the Valanis-Landel hypothesis also results in excellent agreement with the theoretical prediction

Visco-hyperelastic model with damage for simulating cyclic thermoplastic elastomers behavior applied to an industrial component

In this work a nonlinear phenomenological visco-hyperelastic model including damage consideration is developed to simulate the behavior of Santoprene 101-73 material. This type of elastomeric material is widely used in the automotive and aeronautic sectors, as it has multiple advantages. However, there are still challenges in properly analyzing the mechanical phenomena that these materials exhibit. To simulate this kind of material a lot of theories have been exposed, but none of them have been endorsed unanimously. In this paper, a new model is presented based on the literature, and on experimental data. The test samples were extracted from an air intake duct component of an automotive engine. Inelastic phenomena such as hyperelasticity, viscoelasticity and damage are considered singularly in this model, thus modifying and improving some relevant models found in the literature. Optimization algorithms were used to find out the model parameter values that lead to the best fit of the experimental curves from the tests. An adequate fitting was obtained for the experimental results of a cyclic uniaxial loading of Santoprene 101-73

On the Deformation of a Hyperelastic Tube Due to Steady Viscous Flow Within

In this chapter, we analyze the steady-state microscale fluid--structure interaction (FSI) between a generalized Newtonian fluid and a hyperelastic tube. Physiological flows, especially in hemodynamics, serve as primary examples of such FSI phenomena. The small scale of the physical system renders the flow field, under the power-law rheological model, amenable to a closed-form solution using the lubrication approximation. On the other hand, negligible shear stresses on the walls of a long vessel allow the structure to be treated as a pressure vessel. The constitutive equation for the microtube is prescribed via the strain energy functional for an incompressible, isotropic Mooney--Rivlin material. We employ both the thin- and thick-walled formulations of the pressure vessel theory, and derive the static relation between the pressure load and the deformation of the structure. We harness the latter to determine the flow rate--pressure drop relationship for non-Newtonian flow in thin- and thick-walled soft hyperelastic microtubes. Through illustrative examples, we discuss how a hyperelastic tube supports the same pressure load as a linearly elastic tube with smaller deformation, thus requiring a higher pressure drop across itself to maintain a fixed flow rate.Comment: 19 pages, 3 figures, Springer book class; v2: minor revisions, final form of invited contribution to the Springer volume entitled "Dynamical Processes in Generalized Continua and Structures" (in honour of Academician D.I. Indeitsev), eds. H. Altenbach, A. Belyaev, V. A. Eremeyev, A. Krivtsov and A. V. Porubo

A model for the anisotropic response of fibrous soft tissues using six discrete fibre bundles

The development of accurate constitutive models of fibrous soft-tissues is a challenging problem. Many consider the tissue to be a collection of fibres with a continuous distribution function representing their orientations. A novel discrete fibre model is presented consisting of six weighted fibre bundles. Each bundle is oriented such that they pass through opposing vertices of a regular icosahedron. A novel aspect of the model is the use of simple analytical distribution functions to simulate the undulated collagen fibres. This approach yields a closed form analytical expression for the strain energy function for the collagen fibre bundle that avoids the sometimes costly numerical integration of some statistical distribution functions. The elastin fibres are characterized by a neo-Hookean strain energy function. The model accurately simulates the biaxial stretching of rabbit-skin (error-of-fit 8.7%), the uniaxial stretching of pig-skin (error-of-fit 7.6%), equibiaxial loading of aortic valve cusp (error-of-fit 0.8%), and the simple shear of rat septal myocardium (error-of-fit 9.1%). The proposed model compares favourably with previously published soft-tissue models and alternative methods of representing undulated collagen fibres. The stiffness of collagen fibres predicted by the model ranges from 8.0 MPa to 0.93 GPa. The stiffness of elastin fibres ranges from 2.5 kPa to 154.4 kPa. The anisotropy of model resulting from the representation of the fibre field with a discrete number of fibres is also explored

Performance of soft dielectric laminated composites

This paper contains a thorough investigation of the performance of electrically activated layered soft dielectric composite actuators under plane deformation. Noting that the activation can be induced controlling either the voltage or the surface charge, the overall behaviour of the system is obtained via homogenization at large strains taking either the macroscopic electric field or the macroscopic electric displacement field as independent electrical variable. The performance of a two-phase composite actuator compared to that of the homogeneous case is highlighted for few boundary-value problems and for different values of stiffness and permittivity ratios between constituents being significant for applications, where the soft matrix is reinforced by a relatively small volume fraction of a stiff and high-permittivity phase. For charge-controlled devices, it is shown that some composite layouts admit, on one hand, the occurrence of pull-in/snap-through instabilities that can be exploited to design release-actuated systems, on the other, the possibility of thickening at increasing surface charge density