Neuro-memristive Circuits for Edge Computing: A review

The volume, veracity, variability, and velocity of data produced from the ever-increasing network of sensors connected to Internet pose challenges for power management, scalability, and sustainability of cloud computing infrastructure. Increasing the data processing capability of edge computing devices at lower power requirements can reduce several overheads for cloud computing solutions. This paper provides the review of neuromorphic CMOS-memristive architectures that can be integrated into edge computing devices. We discuss why the neuromorphic architectures are useful for edge devices and show the advantages, drawbacks and open problems in the field of neuro-memristive circuits for edge computing

Memristor: Modeling, Simulation and Usage in Neuromorphic Computation

Memristor, the fourth passive circuit element, has attracted increased attention from various areas since the first real device was discovered in 2008. Its distinctive characteristic to record the historic profile of the voltage/current through itself creates great potential in future circuit design. Inspired by its high Scalability, ultra low power consumption and similar functionality to biology synapse, using memristor to build high density, high power efficiency neuromorphic circuits becomes one of most promising and also challenging applications. The challenges can be concluded into three levels: device level, circuit level and application level. At device level, we studied different memristor models and process variations, then we carried out three independent variation models to describe the variation and stochastic behavior of TiO2 memristors. These models can also extend to other memristor models. Meanwhile, these models are also compact enough for large-scale circuit simulation. At circuit level, inspired by the large-scale and unique requirement of memristor-based neuromorphic circuits, we designed a circuit simulator for efficient memristor cross-point array simulations. Out simulator is 4~5 orders of magnitude faster than tradition SPICE simulators. Both linear and nonlinear memristor cross-point arrays are studied for level-based and spike-based neuromorphic circuits, respectively. At application level, we first designed a few compact memristor-based neuromorphic components, including ``Macro cell'' for efficient and high definition weight storage, memristor-based stochastic neuron and memristor-based spatio temporal synapse. We then studied three typical neural network models and their hardware realization on memristor-based neuromorphic circuits: Brain-State-in-a-Box (BSB) model stands for level-based neural network, and STDP/ReSuMe models stand for spiking neural network for temporal learning. Our result demonstrates the high resilience to variation of memristor-based circuits and ultra-low power consumption. In this thesis, we have proposed a complete and detailed analysis for memristor-based neuromorphic circuit design from the device level to the application level. In each level, both theoretical analysis and experimental data versification are applied to ensure the completeness and accuracy of the work

CMOS and memristive hardware for neuromorphic computing

The ever-increasing processing power demands of digital computers cannot continue to be fulfilled indefinitely unless there is a paradigm shift in computing. Neuromorphic computing, which takes inspiration from the highly parallel, low power, high speed, and noise-tolerant computing capabilities of the brain, may provide such a shift. To that end, various aspects of the brain, from its basic building blocks, such as neurons and synapses, to its massively parallel in-memory computing networks have been being studied by the huge neuroscience community. Concurrently, many researchers from across academia and industry have been studying materials, devices, circuits, and systems, to implement some of the functions of networks of neurons and synapses to develop bio-inspired (neuromorphic) computing platforms

Memristors for the Curious Outsiders

We present both an overview and a perspective of recent experimental advances and proposed new approaches to performing computation using memristors. A memristor is a 2-terminal passive component with a dynamic resistance depending on an internal parameter. We provide an brief historical introduction, as well as an overview over the physical mechanism that lead to memristive behavior. This review is meant to guide nonpractitioners in the field of memristive circuits and their connection to machine learning and neural computation.Comment: Perpective paper for MDPI Technologies; 43 page

Design of Robust Memristor-Based Neuromorphic Circuits and Systems with Online Learning

Computing systems that are capable of performing human-like cognitive tasks have been an area of active research in the recent past. However, due to the bottleneck faced by the traditionally adopted von Neumann computing architecture, bio-inspired neural network style computing paradigm has seen a spike in research interest. Physical implementations of this paradigm of computing are known as neuromorphic systems. In the recent years, in the domain of neuromorphic systems, memristor based neuromorphic systems have gained increased attention from the research community due to the advantages offered by memristors such as their nanoscale size, nonvolatile nature and power efficient programming capability. However, these devices also suffer from a variety of non-ideal behaviors such as switching speed and threshold asymmetry, limited resolution and endurance that can have a detrimental impact on the operation of the systems employing these devices. This work aims to develop device-aware circuits that are robust in the face of such non-ideal properties. A bi-memristor synapse is first presented whose spike-timing-dependent plasticity (STDP) behavior can be precisely controlled on-chip and hence is shown to be robust. Later, a mixed-mode neuron is introduced that is amenable for use in conjunction with a range of memristors without needing to custom design it. These circuits are then used together to construct a memristive crossbar based system with supervised STDP learning to perform a pattern recognition application. The learning in the crossbar system is shown to be robust to the device-level issues owing to the robustness of the proposed circuits. Lastly, the proposed circuits are applied to build a liquid state machine based reservoir computing system. The reservoir used here is a spiking recurrent neural network generated using an evolutionary optimization algorithm and the readout layer is built with the crossbar system presented earlier, with STDP based online learning. A generalized framework for the hardware implementation of this system is proposed and it is shown that this liquid state machine is robust against device-level switching issues that would have otherwise impacted learning in the readout layer. Thereby, it is demonstrated that the proposed circuits along with their learning techniques can be used to build robust memristor-based neuromorphic systems with online learning

On Spike-Timing-Dependent-Plasticity, Memristive Devices, and Building a Self-Learning Visual Cortex

In this paper we present a very exciting overlap between emergent nanotechnology and neuroscience, which has been discovered by neuromorphic engineers. Specifically, we are linking one type of memristor nanotechnology devices to the biological synaptic update rule known as spike-time-dependent-plasticity (STDP) found in real biological synapses. Understanding this link allows neuromorphic engineers to develop circuit architectures that use this type of memristors to artificially emulate parts of the visual cortex. We focus on the type of memristors referred to as voltage or flux driven memristors and focus our discussions on a behavioral macro-model for such devices. The implementations result in fully asynchronous architectures with neurons sending their action potentials not only forward but also backward. One critical aspect is to use neurons that generate spikes of specific shapes. We will see how by changing the shapes of the neuron action potential spikes we can tune and manipulate the STDP learning rules for both excitatory and inhibitory synapses. We will see how neurons and memristors can be interconnected to achieve large scale spiking learning systems, that follow a type of multiplicative STDP learning rule. We will briefly extend the architectures to use three-terminal transistors with similar memristive behavior. We will illustrate how a V1 visual cortex layer can assembled and how it is capable of learning to extract orientations from visual data coming from a real artificial CMOS spiking retina observing real life scenes. Finally, we will discuss limitations of currently available memristors. The results presented are based on behavioral simulations and do not take into account non-idealities of devices and interconnects. The aim of this paper is to present, in a tutorial manner, an initial framework for the possible development of fully asynchronous STDP learning neuromorphic architectures exploiting two or three-terminal memristive type devices. All files used for the simulations are made available through the journal web site1