A survey on fractional order control techniques for unmanned aerial and ground vehicles

In recent years, numerous applications of science and engineering for modeling and control of unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) systems based on fractional calculus have been realized. The extra fractional order derivative terms allow to optimizing the performance of the systems. The review presented in this paper focuses on the control problems of the UAVs and UGVs that have been addressed by the fractional order techniques over the last decade

Internal Model Control Tuned Proportional Integral Derivative for Quadrotor Unmanned Aerial Vehicle Dynamic Model

In recent times, there are has been growing substantive attention to the quadrotor Unmanned Aerial Vehicle (UAV) stability control. However, inherent nonlinearity is a major challenge with this control technique, this paper, therefore, developed a PID based Internal Model Control (IMC) method for the dynamic model of quadrotor UAV. The versatility and simplicity of the Proportional-Integral-Derivative (PID) controller enable it to enjoy wide usage and acceptability as stability control methods for the unmanned aerial vehicles. The aim of this paper is to use the PID controller with IMC to control a UAV. The proposed approach - IMC-PID control method -was simulated using MATLAB software and X-plane flight simulator. Thereafter, a comparative analysis of the IMC-PID control method with Chien-Hrones-Reswick, Cohen-coon, and Ziegler Nichols based PID Controllers was done using pitch and altitude as performance metrics. Keywords: Internal Model Control,MATLAB/Simulink, Proportional Integral Derivative, Quadrotor, Unmanned Aerial Vehicle (UAV),X-Plane, DOI: 10.7176/CTI/9-01 Publication date: April 30th 202

Adaptive and Optimal Motion Control of Multi-UAV Systems

This thesis studies trajectory tracking and coordination control problems for single and multi unmanned aerial vehicle (UAV) systems. These control problems are addressed for both quadrotor and fixed-wing UAV cases. Despite the fact that the literature has some approaches for both problems, most of the previous studies have implementation challenges on real-time systems. In this thesis, we use a hierarchical modular approach where the high-level coordination and formation control tasks are separated from low-level individual UAV motion control tasks. This separation helps efficient and systematic optimal control synthesis robust to effects of nonlinearities, uncertainties and external disturbances at both levels, independently. The modular two-level control structure is convenient in extending single-UAV motion control design to coordination control of multi-UAV systems. Therefore, we examine single quadrotor UAV trajectory tracking problems to develop advanced controllers compensating effects of nonlinearities and uncertainties, and improving robustness and optimality for tracking performance. At fi rst, a novel adaptive linear quadratic tracking (ALQT) scheme is developed for stabilization and optimal attitude control of the quadrotor UAV system. In the implementation, the proposed scheme is integrated with Kalman based reliable attitude estimators, which compensate measurement noises. Next, in order to guarantee prescribed transient and steady-state tracking performances, we have designed a novel backstepping based adaptive controller that is robust to effects of underactuated dynamics, nonlinearities and model uncertainties, e.g., inertial and rotational drag uncertainties. The tracking performance is guaranteed to utilize a prescribed performance bound (PPB) based error transformation. In the coordination control of multi-UAV systems, following the two-level control structure, at high-level, we design a distributed hierarchical (leader-follower) 3D formation control scheme. Then, the low-level control design is based on the optimal and adaptive control designs performed for each quadrotor UAV separately. As particular approaches, we design an adaptive mixing controller (AMC) to improve robustness to varying parametric uncertainties and an adaptive linear quadratic controller (ALQC). Lastly, for planar motion, especially for constant altitude flight of fixed-wing UAVs, in 2D, a distributed hierarchical (leader-follower) formation control scheme at the high-level and a linear quadratic tracking (LQT) scheme at the low-level are developed for tracking and formation control problems of the fixed-wing UAV systems to examine the non-holonomic motion case. The proposed control methods are tested via simulations and experiments on a multi-quadrotor UAV system testbed

Output Feedback Image-Based Visual Servoing of Rotorcrafts

© 2018, Springer Nature B.V. This paper presents an improved output feedback based image-based visual servoing (IBVS) law for rotorcraft unmanned aerial vehicles (RUAVs). The control law enables a RUAV with a minimal set of sensors, i.e. an inertial measurement unit (IMU) and a single downward facing camera, to regulate its position and heading relative to a planar visual target consisting of multiple points. As compared to our previous work, twofold improvement is made. First, the desired value of the image feature of controlling the vertical motion of the RUAV is a function of other image features instead of a constant. This modification helps to keep the visual target stay in the camera’s field of view by indirectly adjusting the height of the vehicle. Second, the proposed approach simplifies our previous output feedback law by reducing the dimension of the observer filter state space while the same asymptotic stability result is kept. Both simulation and experimental results are presented to demonstrate the performance of the proposed controller

Nonlinear Dynamics and Control of Aerial Robots

Aerial robotics is one of the fastest growing industry and has a number of evolving applications. Higher agility make aerial robots ideal candidate for applications like rescue missions especially in difficult to access areas. This chapter first derives the complete nonlinear dynamics of an aerial robot consisting of a quadcopter with a two-link robot manipulator. Precise control of such an aerial robot is a challenging task due to the fact that the translational and rotational dynamics of the quadcopter are strongly coupled with the dynamics of the manipulator. We extend our previous results on the control of quadrotor UAVs to the control of aerial robots. In particular, we design a backstepping and Lyapunov-based nonlinear feedback control law that achieves point-to-point control of the areal robot. The effectiveness of this feedback control law is illustrated through a simulation example

Tracking Control Design for Quadrotor Unmanned Aerial Vehicle

The model of a quadrotor unmanned aerial vehicle (UAV) is nonlinear and dynamically unstable. A flight controller design is proposed on the basis of Lyapunov stability theory which guarantees that all the states remain and reach on the sliding surfaces. The control strategy uses sliding mode with a backstepping control to perform the position and attitude tracking control. This proposed controller is simple and effectively enhance the performance of quadrotor UAV. In order to demonstrate the robustness of the proposed control method, White Gaussian Noise and aerodynamic moment disturbances are taken into account. The performance of the nonlinear control method is evaluated by comparing the performance with developed linear quadratic regulator and existing backstepping control technique and proportional-integral-derivative from the literature. The comparative performance results demonstrate the superiority and effectiveness of the proposed control strategy for the quadrotor UAV