Direct yaw-moment control of an in-wheel-motored electric vehicle based on body slip angle fuzzy observer

A stabilizing observer-based control algorithm for an in-wheel-motored vehicle is proposed, which generates direct yaw moment to compensate for the state deviations. The control scheme is based on a fuzzy rule-based body slip angle (beta) observer. In the design strategy of the fuzzy observer, the vehicle dynamics is represented by Takagi-Sugeno-like fuzzy models. Initially, local equivalent vehicle models are built using the linear approximations of vehicle dynamics for low and high lateral acceleration operating regimes, respectively. The optimal beta observer is then designed for each local model using Kalman filter theory. Finally, local observers are combined to form the overall control system by using fuzzy rules. These fuzzy rules represent the qualitative relationships among the variables associated with the nonlinear and uncertain nature of vehicle dynamics, such as tire force saturation and the influence of road adherence. An adaptation mechanism for the fuzzy membership functions has been incorporated to improve the accuracy and performance of the system. The effectiveness of this design approach has been demonstrated in simulations and in a real-time experimental settin

Sideslip estimation for articulated heavy vehicles at the limits of adhesion

Various active safety systems proposed for articulated heavy goods vehicles (HGVs) require an accurate estimate of vehicle sideslip angle. However in contrast to passenger cars, there has been minimal published research on sideslip estimation for articulated HGVs. State-of-the-art observers, which rely on linear vehicle models, perform poorly when manoeuvring near the limits of tyre adhesion. This paper investigates three nonlinear Kalman filters (KFs) for estimating the tractor sideslip angle of a tractor–semitrailer. These are compared to the current state-of-the-art, through computer simulations and vehicle test data. An unscented KF using a 5 degrees-of-freedom single-track vehicle model with linear adaptive tyres is found to substantially outperform the state-of-the-art linear KF across a range of test manoeuvres on different surfaces, both at constant speed and during emergency braking. Robustness of the observer to parameter uncertainty is also demonstrated.Engineering and Physical Sciences Research Council, Cambridge Vehicle Dynamics Consortiu

DIAGRAMS, FUNCTIONAL AND CONSTRUCTIVE SOLUTIONS OF THE STABILITY CONTROL SYSTEMS FOR AUTOMOTIVE APPLICATION

The modern car must correspond to certain requirements regarding the driver safety and more than that it must convince the potential buyer that it will offer him the safety he is so much in need of. For that reason the number and the diversity of the safety systems have increased so fast. Despite all this for the time being it can not be stated that a particular vehicle is totally safe and it can come through any difficult situation. Because of that the research in the field is carried on and the number of those who propose solutions mend to improve the vehicle behavior is getting bigger.active safety, vehicle, control

On the vehicle sideslip angle estimation: a literature review of methods, models and innovations

Typical active safety systems controlling the dynamics of passenger cars rely on real-time monitoring of the vehicle sideslip angle (VSA), together with other signals like wheel angular velocities, steering angle, lateral acceleration, and the rate of rotation about the vertical axis, known as the yaw rate. The VSA (aka attitude or “drifting” angle) is defined as the angle between the vehicle longitudinal axis and the direction of travel, taking the centre of gravity as a reference. It is basically a measure of the misalignment between vehicle orientation and trajectory therefore it is a vital piece of information enabling directional stability assessment, in transients following emergency manoeuvres for instance. As explained in the introduction the VSA is not measured directly for impracticality and it is estimated on the basis of available measurements like wheel velocities, linear and angular accelerations etc. This work is intended to provide a comprehensive literature review on the VSA estimation problem. Two main estimation methods have been categorised, i.e. Observer-based and Neural Network-based, focusing on the most effective and innovative approaches. As the first method normally relies on a vehicle model, a review of the vehicle models has been included. Advantages and limitations of each technique have been highlighted and discussed

Real-Time Vehicle Parameter Estimation and Adaptive Stability Control

This dissertation presents a novel Electronic Stability Control (ESC) strategy that is capable of adapting to changing vehicle mass, tire condition and road surface conditions. The benefits of ESC are well understood with regard to assisting drivers to maintain vehicle control during extreme handling maneuvers or when extreme road conditions such as ice are encountered. However state of the art ESC strategies rely on known and invariable vehicle parameters such as vehicle mass, yaw moment of inertia and tire cornering stiffness coefficients. Such vehicle parameters may change over time, especially in the case of heavy trucks which encounter widely varying load conditions. The objective of this research is to develop an ESC control strategy capable of identifying changes in these critical parameters and adapting the control strategy accordingly. An ESC strategy that is capable of identifying and adapting to changes in vehicle parameters is presented. The ESC system utilizes the same sensors and actuators used on commercially-available ESC systems. A nonlinear reduced-order observer is used to estimate vehicle sideslip and tire slip angles. In addition, lateral forces are estimated providing a real-time estimate of lateral force capability of the tires with respect to slip angle. A recursive least squares estimation algorithm is used to automatically identify tire cornering stiffness coefficients, which in turn provides a real-time indication of axle lateral force saturation and estimation of road/tire coefficient of friction. In addition, the recursive least squares estimation is shown to identify changes in yaw moment of inertia that may occur due to changes in vehicle loading conditions. An algorithm calculates the reduction in yaw moment due to axle saturation and determines an equivalent moment to be generated by differential braking on the opposite axle. A second algorithm uses the slip angle estimates and vehicle states to predict a Time to Saturation (TTS) value of the rear axle and takes appropriate action to prevent vehicle loss of control. Simulation results using a high fidelity vehicle modeled in CarSim show that the ESC strategy provides improved vehicle performance with regard to handling stability and is capable of adapting to the identified changes in vehicle parameters

Smart Traction Control Systems for Electric Vehicles Using Acoustic Road-type Estimation

The application of traction control systems (TCS) for electric vehicles (EV) has great potential due to easy implementation of torque control with direct-drive motors. However, the control system usually requires road-tire friction and slip-ratio values, which must be estimated. While it is not possible to obtain the first one directly, the estimation of latter value requires accurate measurements of chassis and wheel velocity. In addition, existing TCS structures are often designed without considering the robustness and energy efficiency of torque control. In this work, both problems are addressed with a smart TCS design having an integrated acoustic road-type estimation (ARTE) unit. This unit enables the road-type recognition and this information is used to retrieve the correct look-up table between friction coefficient and slip-ratio. The estimation of the friction coefficient helps the system to update the necessary input torque. The ARTE unit utilizes machine learning, mapping the acoustic feature inputs to road-type as output. In this study, three existing TCS for EVs are examined with and without the integrated ARTE unit. The results show significant performance improvement with ARTE, reducing the slip ratio by 75% while saving energy via reduction of applied torque and increasing the robustness of the TCS.Comment: Accepted to be published by IEEE Trans. on Intelligent Vehicles, 22 Jan 201

Vehicle Dynamics, Lateral Forces, Roll Angle, Tire Wear and Road Profile States Estimation - A Review

Estimation of vehicle dynamics, tire wear, and road profile are indispensable prefaces in the development of automobile manufacturing due to the growing demands for vehicle safety, stability, and intelligent control, economic and environmental protection. Thus, vehicle state estimation approaches have captured the great interest of researchers because of the intricacy of vehicle dynamics and stability control systems. Over the last few decades, great enhancement has been accomplished in the theory and experiments for the development of these estimation states. This article provides a comprehensive review of recent advances in vehicle dynamics, tire wear, and road profile estimations. Most relevant and significant models have been reviewed in relation to the vehicle dynamics, roll angle, tire wear, and road profile states. Finally, some suggestions have been pointed out for enhancing the performance of the vehicle dynamics models

Hybrid Kinematic-Dynamic Sideslip and Friction Estimation

Vehicle sideslip and tyre/road friction are crucial variables for advanced vehicle stability control systems. Estimation is required since direct measurement through sensors is costly and unreliable. In this paper, we develop and validate a sideslip estimator robust to unknown road grip conditions. Particularly, the paper addresses the problem of rapid tyre/road friction adaptation when sudden road condition variations happen. The algorithm is based on a hybrid kinematic-dynamic closed-loop observer augmented with a tyre/road friction classifier that reinitializes the states of the estimator when a change of friction is detected. Extensive experiments on a four wheel drive electric vehicle carried out on different roads quantitatively validate the approach. The architecture guarantees accurate estimation on dry and wet asphalt and snow terrain with a maximum sideslip estimation error lower than 1.5 deg. The classifier correctly recognizes 87% of the friction changes; wrongly classifies 2% of the friction changes while it is unable to detect the change in 11% of the cases. The missed detections are due to the fact that the algorithm requires a certain level of vehicle excitation to detect a change of friction. The average classification time is 1.6 s. The tests also indicate the advantages of the friction classifiers on the sideslip estimation error