Modeling, Control and Optimisation of Hybrid Systems in a Manufacturing Setting

This study comprises a body of work that investigates the performance of hybrid manufacturing systems. And we have provided a valuable insight into the development of the optimisation techniques for hybrid manufacturing system. With the primary objective of developing prac-tical mathematical algorithms that balance trade-o? cost between product quality and completion time. For sta-bility criterion, a sliding mode control was deployed

Optimized state feedback regulation of 3DOF helicopter system via extremum seeking

In this paper, an optimized state feedback regulation of a 3 degree of freedom (DOF) helicopter is designed via extremum seeking (ES) technique. Multi-parameter ES is applied to optimize the tracking performance via tuning State Vector Feedback with Integration of the Control Error (SVFBICE). Discrete multivariable version of ES is developed to minimize a cost function that measures the performance of the controller. The cost function is a function of the error between the actual and desired axis positions. The controller parameters are updated online as the optimization takes place. This method significantly decreases the time in obtaining optimal controller parameters. Simulations were conducted for the online optimization under both fixed and varying operating conditions. The results demonstrate the usefulness of using ES for preserving the maximum attainable performance

Type-2 Fuzzy Hybrid Controller Network for Robotic Systems

Dynamic control, including robotic control, faces both the theoretical challenge of obtaining accurate system models and the practical difficulty of defining uncertain system bounds. To facilitate such challenges, this paper proposes a control system consisting of a novel type of fuzzy neural network and a robust compensator controller. The new fuzzy neural network is implemented by integrating a number of key components embedded in a Type-2 fuzzy cerebellar model articulation controller (CMAC) and a brain emotional learning controller (BELC) network, thereby mimicking an ideal sliding mode controller. The system inputs are fed into the neural network through a Type-2 fuzzy inference system (T2FIS), with the results subsequently piped into sensory and emotional channels which jointly produce the final outputs of the network. That is, the proposed network estimates the nonlinear equations representing the ideal sliding mode controllers using a powerful compensator controller with the support of T2FIS and BELC, guaranteeing robust tracking of the dynamics of the controlled systems. The adaptive dynamic tuning laws of the network are developed by exploiting the popular brain emotional learning rule and the Lyapunov function. The proposed system was applied to a robot manipulator and a mobile robot, demonstrating its efficacy and potential; and a comparative study with alternatives indicates a significant improvement by the proposed system in performing the intelligent dynamic control

Performance analysis of switching systems

Performance analysis is an important aspect in the design of dynamic (control) systems. Without a proper analysis of the behavior of a system, it is impossible to guarantee that a certain design satisfies the system’s requirements. For linear time-invariant systems, accurate performance analyses are relatively easy to make and as a result also many linear (controller) design methods have appeared in the past. For nonlinear systems, on the other hand, such accurate performance analyses and controller design methods are in general not available. A main reason hereof is that nonlinear systems, as opposed to linear time-invariant systems, can have multiple steady-state solutions. Due to the coexistence of multiple steady-state solutions, it is much harder to define an accurate performance index. Some nonlinear systems, i.e. the so-called convergent nonlinear systems, however, are characterized by a unique steady-state solution. This steady-state solution may depend on the system’s input signals (e.g. reference signals), but is independent of the initial conditions of the system. In the past, the notion of convergent systems has already been proven to be very useful in the performance analysis of nonlinear systems with inputs. In this thesis, new results in the field of performance analysis of nonlinear systems with inputs are presented, based on the notion of convergent systems. One part of the thesis is concerned with the question "how to analyse the performance for a convergent system?" Since the behavior of a convergent system is independent of the initial conditions (after some transient time), simulation can be used to find the unique steady-state solution that corresponds to a certain input signal, but this can be very time-consuming. In this thesis, a computationally more efficient approach is presented to estimate the steady-state performance of harmonically forced Lur’e systems, in terms of nonlinear frequency response functions (nFRFs). This approach is based on the method of harmonic linearization. It provides both a linear approximation of the nFRF and an upper bound on the error between this linear approximation and the true nFRF. It is shown in several examples that the approximation of the nFRF is accurate, and that it provides more detailed information on the considered system than the often used ‘L2 gain’ performance index. An additional observation that is made, is that the method of harmonic linearization can sometimes be ‘misleading’ for Lur’e systems with a saturation-like nonlinearity: for the case that the harmonic balance equation has a unique solution, it is shown that the corresponding nonlinear system can have multiple distinct steady-state solutions. Another part of the thesis is concerned with the question "under what conditions is a system with inputs guaranteed to be convergent?" In particular two types of systems were investigated: switched linear systems and Lur’e systems with a saturation nonlinearity and marginally stable linear part. For the switched linear systems, it is assumed that the dynamics of all the separate linear modes are given. For this setting, it was investigated if it is possible to find a switching rule (which defines when to switch between the available modes) such that the closed-loop system is convergent. Both a state-based, an observer-based, and a time-based switching rule are presented that guarantee a convergent system, assuming some conditions on the linear dynamics are met. The second type of systems that are discussed, are Lur’e systems with a saturation nonlinearity and marginally stable linear part. For this type of systems, the goal was to find sufficient conditions under which the closed-loop system is convergent. Because of the marginally stable linear part, however, a quadratically convergent system cannot be obtained. Instead, sufficient conditions are discussed that guarantee uniform convergency of the system. The obtained theory is shown to be also applicable to a class of anti-windup systems with a marginally stable plant. For this class of systems, the results of the convergency-based performance analysis are compared with the analysis results of existing anti-windup methods. It is shown that the convergency-based performance analysis can in some cases provide more detailed information on the steady-state behavior of the system. The results of uniform convergency for anti-windup systems are shown to be also applicable in the field of production and inventory control of discrete-event manufacturing systems. Since a manufacturing machine has a certain production capacity and cannot produce at a negative rate, it can be seen as an integrator plant (input: production rate, output: amount of finished products) preceded by a saturation function. For this marginally stable plant, a controller was constructed in such a way that the closed-loop system is uniformly convergent. The controller was also implemented in the discrete-event domain and the results from discrete-event simulations were compared with those of continuous-time simulations. Similarly, the controller was also applied for the production and inventory control of a line of four manufacturing machines. For both the single machine and the line of four machines, the resulting controlled discrete-event systems are shown to have the desired tracking properties. Besides these theoretical and numerical results, also experimental results are presented in this thesis. By means of an electromechanical construction, several experimental results were obtained, and used to validate the theoretical results for both the switched linear systems and the anti-windup systems