Linearized large signal modeling, analysis, and control design of phase-controlled series-parallel resonant converters using state feedback

This paper proposes a linearized large signal state-space model for the fixed-frequency phase-controlled series-parallel resonant converter. The proposed model utilizes state feedback of the output filter inductor current to perform linearization. The model combines multiple-frequency and average state-space modeling techniques to generate an aggregate model with dc state variables that are relatively easier to control and slower than the fast resonant tank dynamics. The main objective of the linearized model is to provide a linear representation of the converter behavior under large signal variation which is suitable for faster simulation and large signal estimation/calculation of the converter state variables. The model also provides insight into converter dynamics as well as a simplified reduced order transfer function for PI closed-loop design. Experimental and simulation results from a detailed switched converter model are compared with the proposed state-space model output to verify its accuracy and robustness

Modelamiento y desarrollo de un rectificador Boost PFC sin puente

RESUMEN: Este artículo propone un modelo para rectificadores elevadores PFC (Power Factor Correction por sus siglas en inglés) sin puente para propósitos de control y basado en el análisis del promedio de pequeña señal. A partir de las leyes circuitales, cuatro modos de operación son definidos y explicados, asegurando una relación entre las variables físicas del convertidor. Basados en el modelo propuesto, dos lazos cerrados de control compuestos por controladores lineales Proporcionales e Integrales (PI) son propuestos. Algunas consideraciones de diseño para dimensionar los elementos reactivos son incluidas, de tal forma que se obtienen valores mínimos para su inductancia y capacitancia. Se presenta la implementación de un prototipo de 900 W con resultados experimentales que permite validar y reafirmar el modelo propuesto. Los resultados experimentales demuestran que el uso del convertidor PFC permite elevar el factor de potencia FP a 0,99 o más y reducir el THDi (Total Harmonic Distortion of the Current por sus siglas en Inglés) a 3,9 %, además de controlar el bus DC en la salida. Se verifica experimentalmente que el convertidor PFC desarrollado está de acuerdo con los estándares de calidad de la potencia EN 61000-3-2 (IEC 1000-3-2).ABSTRACT: This paper proposes a model of the bridgeless PFC (Power Factor Correction) boost rectifier for control purposes based on an averaged small-signal analysis. From circuital laws, four operation modes are defined and explained, ensuring a relationship of physical variables in the converter. Based on the proposed model, two-loop cascade control structures composed of Proportional-Integral (PI) lineal controllers are proposed. Design consideration for dimensioning reactive elements is included, providing minimum values for their inductance and capacitance. Implementation of a laboratory prototype of 900 W and experimental results are presented to validate and reaffirm the proposed model. Experimental results demonstrate that the use of the bridgeless PFC boost converter model allows the Power Factor (PF) to be elevated up to 0.99, to reduce the THDi (Total Harmonic Distortion of the Current) to 3.9% and to control the DC voltage level on output. Compliance of standards of power quality EN 61000-3-2 (IEC 1000-3-2) are experimentally verified

Fast Adaptive Robust Differentiator Based Robust-Adaptive Control of Grid-Tied Inverters with a New L Filter Design Method

In this research, a new nonlinear and adaptive state feedback controller with a fast-adaptive robust differentiator is presented for grid-tied inverters. All parameters and external disturbances are taken as uncertain in the design of the proposed controller without the disadvantages of singularity and over-parameterization. A robust differentiator based on the second order sliding mode is also developed with a fast-adaptive structure to be able to consider the time derivative of the virtual control input. Unlike the conventional backstepping, the proposed differentiator overcomes the problem of explosion of complexity. In the closed-loop control system, the three phase source currents and direct current (DC) bus voltage are assumed to be available for feedback. Using the Lyapunov stability theory, it is proven that the overall control system has the global asymptotic stability. In addition, a new simple L filter design method based on the total harmonic distortion approach is also proposed. Simulations and experimental results show that the proposed controller assurances drive the tracking errors to zero with better performance, and it is robust against all uncertainties. Moreover, the proposed L filter design method matches the total harmonic distortion (THD) aim in the design with the experimental result

Fuzzy controller tuning of a boost rectifier unity power factor correction by experimental designs

This paper shows the validity of experimental designs as an efficient on-site tuning tool for fuzzy controllers, dedicated to electrical engineering applications with multi-objective criteria. Our purpose is to improve the input and output system characteristics that is to say the global quality of the electrical power in a boost rectifier with unity power factor correction. The desirability notion combines here time dynamic and harmonic criteria, it illustrates the trade-off that has to be satisfied between the different properties

Power factor correction in a single phase AC to DC converter

Electronic equipments recently in use ( PCs, TVs, and Telecommunication Equipments etc.) require power conditioning of some form, typically rectification, for their proper working. But since they have non-linear input characteristics and they are connected the electricity distribution network they produce a non-sinusoidal line current. Current of frequency components which are multiples of the natural frequency are produced that are otherwise called the line harmonics. With constantly increasing demand of these kind of equipments at a high rate, line current harmonics have become a significant problem. There has been an introduction of a lot of international standards which pose limitations on the harmonic content in the line currents of equipments connected to electricity distribution networks. This calls for measures to reduce the line current harmonics which is also otherwise known as Power Factor Correction - PFC. There exist two kinds of power factor correction techniques – passive power factor correction and active power factor correction. In this thesis we tried to devise an active power factor correction method for improvement of the power factor. In this work the advantages of a boost converter is combined with that of the average current mode control to implement the technique. UC3854 was used to design the power factor corrector. This integrated circuit had all the circuits necessary to control a power factor corrector and was designed to implement the average current mode control

Low Voltage Regulator Modules and Single Stage Front-end Converters

Evolution in microprocessor technology poses new challenges for supplying power to these devices. To meet demands for faster and more efficient data processing, modem microprocessors are being designed with lower voltage implementations. More devices will be packed on a single processor chip and the processors will operate at higher frequencies, exceeding 1GHz. New high-performance microprocessors may require from 40 to 80 watts of power for the CPU alone. Load current must be supplied with up to 30A/µs slew rate while keeping the output voltage within tight regulation and response time tolerances. Therefore, special power supplies and Voltage Regulator Modules (VRMs) are needed to provide lower voltage with higher current and fast response. In the part one (chapter 2,3,4) of this dissertation, several low-voltage high-current VRM technologies are proposed for future generation microprocessors and ICs. The developed VRMs with these new technologies have advantages over conventional ones in terms of efficiency, transient response and cost. In most cases, the VRMs draw currents from DC bus for which front-end converters are used as a DC source. As the use of AC/DC frond-end converters continues to increase, more distorted mains current is drawn from the line, resulting in lower power factor and high total harmonic distortion. As a branch of active Power factor correction (PFC) techniques, the single-stage technique receives particular attention because of its low cost implementation. Moreover, with continuously demands for even higher power density, switching mode power supply operating at high-frequency is required because at high switching frequency, the size and weight of circuit components can be remarkably reduced. To boost the switching frequency, the soft-switching technique was introduced to alleviate the switching losses. The part two (chapter 5,6) of the dissertation presents several topologies for this front-end application. The design considerations, simulation results and experimental verification are discussed

Direct Power based Sliding Mode Control of AC-DC Converter with Reduced THD

Direct Power based Sliding Mode (DPSMC) control for controlling single phase AC-DC pre regulator assuring unity power factor and stable output voltage under load variation is proposed in this paper. Direct Power Based Control (DPC) commonly applied for three phase circuits, is combined with Sliding mode control (SMC) to control and regulate the single-phase AC-DC pre regulator. The proposed DPSMC apart from being simple to design and robust to parameter variations also helps in reducing the line current distortion inherent to AC-DC Converters. The design of the proposed power based sliding mode control along with its existence condition is discussed. The performance of the proposed method over conventional sliding mode control is assessed through computer simulations and the feasibility of the proposed controller is confirmed through experimental implementation carried out with the help of LabVIEW and sbRIO FPGA development board

Relationship of servant leadership with employee in-role and extra-role performance in GLC’s of Malaysia

This research aims to study the relationship of servant leadership with employee performance of in-role and extra role performance. Servant leadership, and its relationship with employee OCB and task performance are discussed to start with. Though some literature is available on links of servant leadership with employee task performance or Organizational Citizenship Behaviors, but how these two behaviors interact is not explained much. This paper explains that servant leadership has positive relationship with OCB. Though, other leadership approaches are different from servant leadership as its focus is on personal integrity and lasting relationships with employees